TVCMALL F4 Gravity Sensing Timer

Product Overview

Please read this manual carefully before using the product To ensure that the product is used correctly

Gravity sensing mode/countdown operation

Gravity mode: Toggle button to mode 1

Turn 5-10-30-60 minutes up, the countdown automatically starts, the screen turns up to pause, on the contrary, the screen turns down to timekeeping is zeroed out (as shown)

Manual mode

Manual mode: Toggle button to mode 2

Adjustable M/S button, click the center button to start the countdown

Positive timing:

1. When the display shows 00:00 seconds, short press the [SP/ST] button to start the positive timing.
2. During the timing process, short press the [SP/ST] button to pause/start the timing.;
3. In a paused state, long press the [ST/SP] button to timekeeping is zeroed out.

Countdown setting

1. Short press the [M/S] button to adjust the countdown time, long press the [M/S] button to adjust the countdown time quickly, and after setting, short press the [SP/ST] button to start the countdown.
2. During the counting process, short press the [SP/ST] button to pause/start the countdown;
3. In a paused state, long press [SP/ST] button to timekeeping is zeroed out.
4. After the countdown time reaches 00:00, there will be up to one-minute alarm reminder (“di di di” LED screen lights up / sound stops LED screen off – these two prompts 1-second group – so the cycle). Silent mode vibration reminder.
5. Memory mode: After the countdown is finished, short press again the [SP/ST] button to display the current setting time. If you need to reset the timer, long press and ST/SP button. Short press again to cycle the operation

Positive timer operation explanation:

Timer operation illustration

Documents / Resources

TVCMALL F4 Gravity Sensing Timer [pdf] User Manual F4 Gravity Sensing Timer, F4, Gravity Sensing Timer, Sensing Timer, Timer

References

• User Manual