TURTLE BEACH MC5 Command Series Wireless Mouse User Guide

PACKAGE CONTENTS

DEFAULT BUTTON ASSIGNMENT

SETUP

1. Remove the protective plastic film from the mouse feet.

2. Plug the USB-A Transmitter into any free USB port.

3. Select 2.4GHz mode on the power slider underneath the mouse to connect via the dongle.

4. Navigate to www.turtlebeach.com/swarm2 and download the latest driver software. Complete the installation to get access to all software features and setup.

LED INDICATION

• When the battery is below 10%, the RGB LED will periodically blink red.
• When the mouse is charging, via USB cable, the RGB LED will display a colour corresponding to the battery level:
  • 0-10% Red
  • 10-50% Orange
  • 50-100% Green
• Once the mouse is plugged in, pressing the DPI button will change the DPI and show a corresponding color on the indicator LED for 2 seconds. The color is shown as below:
  • 1st stage Red (default DPI value: 400)
  • 2nd stage Green (default DPI value: 800)
  • 3rd stage Cyan (default DPI value: 1200)
  • 4th stage Blue (default DPI value: 1600)
  • 5th stage Pink (default DPI value: 3200)
• The number of active DPI stages on your mouse can be changed in the driver software, along with the DPI value for each stage.

TECHNICAL SPECIFICATION

• Connectivity: 2.4 GHz Wireless, Bluetooth®, USB-A
• Sensor: Owl-Eye™ 30k Optical, glass surface compatible
• Min/Max DPI: 50 / 30,000
• IPS Tracking Speed: 750
• USB Report Rate: 8,000 Hz
• Acceleration: 70 G
• On-Board Memory: Yes
• Software: Swarm II
• Weight: 99g
• Battery Lifetime:
  • Up to 90h @1000Hz polling rate
  • Up to 35h @8000Hz polling rate

SYSTEM REQUIREMENTS

• Windows® 10 and up
• USB 2.0 and higher
• Internet connection (for driver software)