TThotel E3 Reader Encoder

CARD Reader/Encoder E3

Model: E3
Dimensions: 70mm x 70mm x 26mm
Power interface: Type-C USB
Power input: 5V/500mA
Radio frequency: 13.56Mhz
Support card type: Mi Fare S50

Light/sound status

When the device is powered on:

Green light: Card encoder mode
Blue light: Card reader mode

Voice prompt on passing a card:

Success on encoding/reading a card: One short beep

Steps

1. Connect the USB cable with PC
   
2. Plug the USB into the card encoder
   
3. Install drive program for the card encoder

Disclaimer
We continuously optimize products as new technologies and features are developed. For this reason, we reserve the right to make alterations to the products without prior notice.

Documents / Resources

TThotel E3 Reader Encoder [pdf] User Manual E3, E3 Reader Encoder, E3, Reader Encoder, Encoder

References

• User Manual