K7 PRO III Operation Guide

Install Noo-psyche APP

First, download the Noo-psyche APP. Install the Noo-Psyche APP on your device and grant it permission to access the device's location to continue.

For iOS: Download from the App Store.

For Android: Download from www.noo-psyche.com/Userguidance or scan the QR code provided in the original document for guidance.

Keys Instruction

This section explains how to switch the light between Auto and Manual modes.

Notice: Only lights that are always on blue (auto) can connect to the APP.

Connection Mode

There are two methods for the APP to connect to the light: AP mode or LAN mode. Both methods can be used once connected.

How to know if the light is on LAN or AP connection mode?

How to Switch LAN and AP mode of the light?

AP Connection

1. Switch the light on AP mode. Refer to the "Connection Mode" section above.
2. Open the APP, click the Portrait icon.
3. Click "Apply Permission" and allow Noo-Psyche to access location.
4. Click "SWITCHING NETWORK". Ensure WLAN is on. Find your device (e.g., K7_Pro****) in the WLAN list, enter the password (12345678), and click "connect".
5. Confirm it is an AP connection and click "SAVE".

Function

After connecting the APP and the light, access options based on your reef tank type. There are two running modes: manual and auto (e.g., LPS).

Default spectrum preset

There are default spectrum presets for SPS, LPS, and SPS/LPS. To use a default spectrum setting, select "Auto", click "FACTORY SETTINGS", and then "Save".

Manual – One click viewing

Select LPS. Switch to "Manual". Adjust the brightness using the progress bar, then click "SAVE".

Auto - Sunrise and sunset scene simulation

Modify parameters for automatic sunrise and sunset simulations:

1. Click "Auto".
2. Click "TIME POINT SETTING".
3. Click "EDIT" to modify channel parameters.
4. Set the brightness for each channel at the desired time points. Click "CONFIRM" when done for a time point, and "CLOSE" when all time points are set.
5. Click "SAVE". To quickly check the spectrum, click "Demo Mode".

After setup, returning to the homepage will show a green dot indicating the LPS setting is running.

Export/Import spectrum settings

You can export your spectrum settings as a QR code, which will be saved to your photo album. You can also import saved QR codes. Click "Export" to download your settings, and "import" to upload saved settings, then click "save".

Configuring Master/Slave Lighting

This section details how to switch lights between Master and Slave modes.

Slaves: When the LED indicator is always on, press and hold the L key until the LED indicator turns green, then release it. Click the L key again (the green indicator light flashes) to put it into standby. All slaves should do the same.

Master: When the LED indicator is always on blue, press and hold the L key. Release it when the indicator flashes. The master sends a command to the slave, and the slave's green indicator stops flashing.

Note on Syncing: After adding a new light as a slave, if its brightness differs from other slaves, you can sync them. Operation: Click the L key of the Master to turn the indicator red. Press and hold the L key until the indicator flashes red, then release the L key to send data to the slaves for synchronization.

LAN connection

Noo-Psyche lights support only a separate 2.4GHz routing band. If your 5GHz and 2.4GHz bands are combined, the light cannot pair with Wi-Fi using LAN mode.

Before LAN connection: Set a separate SSID for the 2.4GHz routing band in your router's wireless settings. Access your router's wireless page (the entry address is usually on the router's back label). Go to the 2.4 GHz setting page and set the Wi-Fi name (SSID) to "(XXX)-2.4G", where XXX is your Wi-Fi name. Save the settings. Please consult your router's manual or search online for specific operations.

LAN Connection Steps:

1. First, confirm the light is in LAN mode. In the blue indicator state, press and hold the R key until the indicator flashes blue, then release the key to enter network waiting configuration state.
2. Connect your phone device to the 2.4GHz routing band Wi-Fi.
3. Open the app, click the Portrait icon, and click "Apply Permission" to "Allow Noo-Psyche to access this device's location".
4. Select "LAN connection" and enter the Wi-Fi password for the 2.4GHz routing band. Click "SAVE". The device will attempt to connect (this may take about 30 seconds), then click "OK".

Factory Reset

When the LED indicator is always on red, press and hold the R Key until the indicator turns off. NOTE: Once the light is reset to factory settings, its connection to the device will be cancelled.

Warnings

1. Power Off Memory Function: The light will run the last saved setting when it is turned on.
2. Brightness Adjustment: Do not suddenly increase the brightness, as this can harm corals, causing nervousness, bleaching, or death.
3. Initial Setup: If switching from weaker lights, it is recommended to set the initial total brightness at 50%.

Warranty

All Noo-Psyche (NP) products have a 12-month warranty service from the date of purchase. If there is a quality problem within the warranty period, Noo-Psyche will repair or replace parts free of charge.

The warranty does not cover damage caused by modification, accident, mishandling, misuse, or unauthorized repairs. Exclusions include damage due to misuse or abuse, such as using modified bulbs or altering electrical circuits.

Specification

Size: 212*127*31mm

Weight: 0.78kg / 1.7lb

Power: 140W

Voltage: 100-240V 50/60Hz 3A

Warranty: one year

Factory URL: www.noo-psyche.com