K7 PRO III Operation Guide

Notice

The K7 PRO III will auto-run the settings saved from the last power-off cycle, including Timeline, program, and brightness. Requires the Noo-Psyche APP for secure access. Download the APP from the App Store (iOS) or https://noo-psyche.com/ (Android). Alternatively, scan the provided QR code.

Factory Reset: When the LED indicator is solid red, press and hold the R Button until the indicator turns off.

Indicator Operation:

• Tap L Button: Switches LED indicator color.
• Red Indicator: Manual Mode.
• Blue Indicator: Auto Mode.
• Press & hold L Button (indicator solid blue): Until indicator turns green, then tap L (green indicator flashes) to standby for linkage (for slaves).
• Press & hold L Button (indicator solid blue): Release when indicator flashes (to send command as master). Slaves' green indicator will stop flashing upon receiving the command.
• Syncing Brightness (after adding a new slave): Tap L button of Master to turn indicator red, then press and hold L until indicator flashes red, release to sync data to slaves.

Connection Mode

There are two connection modes: LAN and AP mode.

Identifying Mode:

• LAN Mode: Indicator flashes blue twice.
• AP Mode: Indicator flashes red twice.

Switching Modes:

• To AP Mode: Press and hold the R button until the indicator flashes red, release when it stops flashing.
• To LAN Mode: Press and hold the R button until the indicator flashes blue, release when it stops flashing.

Note: Noo-Psyche devices only support 2.4GHz routing bands.

LAN Connection Steps:

1. Ensure the light is in LAN mode (blue indicator state). Press and hold the R button until the indicator flashes blue, then release to enter network configuration state.
2. Open Wi-Fi on your phone, install and open the Noo-Psyche APP. Click the profile icon.
3. Click "Apply Permission" and select "Allow" for location permissions (required for Wi-Fi information).
4. Select LAN connection, enter the router password, and save. The device will connect.

AP Connection Steps:

1. Ensure the light is in AP mode (red indicator state). Press and hold the R button until the indicator flashes red, then release to enter network configuration state.
2. Open Wi-Fi on your phone, install and open the Noo-Psyche APP. Click the profile icon.
3. Click "Apply Permission" and select "Allow" for location permissions.
4. Find "K7_Pro+number" (e.g., K7_Pro41896) in the WLAN list, enter the password (default: 12345678), and click connect.
5. Select AP connection and save. The connection between the APP and the K7 light is now complete.

Manual Mode Operation

1. Select LPS (or other desired mode like SPS, S/L). A green dot indicates a successful connection.
2. Select "Manual".
3. Adjust brightness for each channel by pulling the bars. Save when done.

Auto Mode Operation & Parameter Modification

1. Select "Auto".
2. Select "TIME POINT SETTING".
3. Click "EDIT" to set time points.
4. Set the brightness for each channel at each time point. Click "CONFIRM". Click "CLOSE" when all time points are set.
5. Click "SAVE" first. Then click "Demo Mode (4 Minutes)" to preview.

Export/Input (Share Spectrum Settings via QR Code): Click "Export" to generate a QR code image in your album to share settings. To import settings, find and scan the QR code page and save.

Warning:

• Suddenly increasing brightness can harm corals, causing stress, bleaching, or death.
• If switching from lower intensity lights, it is recommended to set the initial total brightness to 50%.

Note: Restoring fixtures to factory settings will cancel linked fixtures.

Warranty Notes

Noo-Psyche (NP) LED lighting products have a 12-month warranty from the date of purchase. Noo-Psyche will repair or replace parts free of charge for quality issues within the warranty period. The warranty does not cover damage from modification, accidents, mishandling, misuse, or unauthorized repairs. Exclusions include damage from misuse or abuse, such as using modified bulbs or altering electrical circuits.

Specification

• Size: 212*127*31 mm
• Weight: 0.78 Kg
• Power: 140W
• Voltage: 100-240V
• Frequency: 50/60Hz
• Current: 3A
• Warranty: One year

For more details, please visit: www.noo-psyche.com