tp-link UE300 USB to Ethernet Network Adapter
Product Specifications
- Product Name: USB to Ethernet Network Adapter
- Interface: USB to RJ45
- Plug and Play Support: Yes
Product Usage Instructions
1. Plug and Play Feature:
This adapter supports the Plug and Play feature. Follow these steps to start using the adapter:
- Insert the USB end of the adapter into a USB port on your computer.
- Wait for a few seconds for the system to detect the adapter.
- Once detected, the adapter is ready to use.
2. Driver Installation (if required):
If the adapter does not work as Plug and Play on your operating system, follow these steps:
- If a prompt page appears after inserting the adapter, click to install the driver.
- If no prompt appears, visit the official website at www.tp-link.com.
- Search for the model of the adapter and download the driver from the website.
- Install the downloaded driver on your computer.
FAQs
Q: Is driver installation necessary for all operating systems?
A: No, driver installation is only required for operating systems where the adapter is not recognized as plug-and-play.
Q: Can I use this adapter for wired network connections?
A: Yes, this adapter provides connectivity to wired networks through the RJ45 port.
USING INSTRUCTION
This adapter supports Plug and Play feature. Plug in and wait for seconds. Then this adapter is ready to use.
Note: For some operating systems, the adapter is not plug-and-play. If you see a prompt page after inserting the adapter, just click to install the driver, or download and install the driver from our official website: visit www.tp-link.com and search for the model.
TP-Link hereby declares that the device is in compliance with the essential requirements and other and (EU)2015/863. relevant provisions of directives 2014/30/EU, 2011/65/EU eTnh/ec eo.original EU declaration of conformity may be found
at https://www.tp-link.com/
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- This product can be powered only by computers that comply with Power Source Class 2 (PS2) or Limited Power Source (LPS) of IEC 62368-1. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
WARRANTY
For TP-Link Branded Products Only. For the information about warranty period, policy, and procedures, please visit https://www.tp-link.com/en/support
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.
TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-Link’s guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.
CONTACT INFORMATION
For technical support, replacement services, the user guide, and more information, please visit https://www.tp-link.com/support
Documents / Resources
 |
tp-link UE300 USB to Ethernet Network Adapter [pdf] User Guide UE300, UE330, UE300 USB to Ethernet Network Adapter, UE300, USB to Ethernet Network Adapter, Ethernet Network Adapter, Network Adapter, Adapter |