tp link - logo

How to distinguish the RJ45&RJ11
User Application Requirement
Updated 06-27-2022 02:49:35 AM tp link RJ45 Modem Router - icon 95410
RJ stands for Registered Jack.

RJ45 Modem Router

RJ45

  • 8 Position
  • 8 Pin/Conductor (4/8 options)
  • Mainly used in network wiring.
  • 6mm * 11mm

tp link RJ45 Modem Router -

Figure 1: RJ45 connector (male) Figure 2: RJ45 Jack (female) 

tp link RJ45 Modem Router - cable

8P8C – T568B wiring
“RJ45 Ethernet cable” 

Figure 6: RJ45-plug-jack-schematic

RJ11

  •  6 Position
  •  4 Pin/Conductor (2/4/6 options)
  • Used for telephone, and (ADSL/VDSL) modem, etc.
  • 6mm * 9.5mm

tp link RJ45 Modem Router - cable1

Figure 4: RJ11 6P4C connector (male) Figure 5: RJ11 6P4C Jack (Female) 

tp link RJ45 Modem Router - cable2

6P2C-RJ11

Figure 3: RJ-11-plug-jack-schematic

RJ45&RJ11 ports on TP-Link Modem Router

tp link RJ45 Modem Router - cable3

Figure 7: RJ11&RJ45 ports on TP-Link modem Router 

The first 3 ports are RJ11 (6P6C/6P4C/6P2C) Jack. These ports are normally used with an RJ11 connector (telephone line).
The 4 yellow ports are RJ45 (8P8C/8P4C) Jack. These ports are normally used with an RJ45 connector (Ethernet cable).

Comparison:

tp link RJ45 Modem Router - cable4

Figure 8: RJ45&RJ11 Pairs Figure 9: RJ11 in real RJ45 in real
Table 1: Comparison between RJ45&RJ11

Configuration 6P4C (6 positions, 4 conductors) 8P8C (8 positions, 8 conductors)
Usage Phones, ADSL/VDSL lines, modem cables. RJ11 is
mostly used for voice applications.
Computer networking. RJ45 is used in Ethernets or connecting
cable/fiber modems or NBN box with Wi-Fi routers.
Bandwidth RJ11 connectors can support about 100+Mbps RJ45 connectors can support up to 10Gbps over Ethernet,
provided the other equipment like network cables also support
that speed.
Shape and size Compact, square-shaped Longer, more rectangular
  • RJ45 is mostly used with Ethernet cables while RJ11 is connecting to telephone units.
  • RJ45 has 8 wires inside while Rj11 has 4 wires.
  • RJ45 is bigger in size than RJ11.
  • You cannot plug-in the RJ45 cable connector into an RJ11 jack/interface/port/slot, however, you can do the opposite. Plugging an RJ11 cable into an RJ45 jack/interface/port/slot is the most common mistake that might happen. It will not work by doing so and it might also damage the RJ45 port as power is being delivered by the telephone company into your handset that allows it to function even during a power outage.

Documents / Resources

tp-link RJ45 Modem Router [pdf] Owner's Manual
RJ45 Modem Router, RJ45, Modem Router, Router, Router RJ45

References

Leave a comment

Your email address will not be published. Required fields are marked *