Quick Installation Guide
Network Camera Junction Box
*Images may differ from actual products.
©2024 TP-Link 7106511803 REV1.0.1

Get Ready

Mount the Box

1. Install the mounting bracket
   1 Place the mounting bracket in the right position, and mark four positions for the screw holes.2 Drill four holes at the marked positions, insert the anchors into the holes, align the bracket to the anchors and drive the self-tapping screws into the anchors through the bracket.
2. Mount the camera to the box2. Mount the camera to the box
   1 Select the appropriate holes and mount the camera on the box according to the camera’s guide. Route the cables through the hole in the middle of the box.
   Here we use InSight S445ZI for demonstration.2 Waterproof the cable using the waterproof accessories that came with your camera, and use some tape to wrap the cables, then insert the cable into the box.3 Determine routing location for bottom or side exit of cables.4Here we use the side exit for demonstration. After routing the cable, insert the provided silicone plugs to the other two outlets for waterproofing.
3. Install the box to the mounting bracket
   1 Align the box to the mounting bracket as the diagram shows.2 Secure the box to the bracket using the screw provided.

Note: When fixing the box to the bracket, make sure that the box is perpendicular to the wall and there is no gap between the box and the wall. Do not tighten the screw with too much force (do not exceed 10kgf.cm).

Appendix A: Mounting Holes for VIGI Cameras

Choose the appropriate mounting holes to mount your VIGI camera according to the table below.
Visit https://www.tp-link.com/vigi-accessories/product-list/ or scan the QR code for a list of compatible devices.

https://www.vigi.com/vigi-accessories/product-list/

Shape	Models	Mounting Holes
	InSight S445 InSight S455 InSight S485 InSight S445ZI
	InSight S245ZI
	VIGI C420I VIGI C430I VIGI C440I VIGI C430 VIGI C440 VIGI C440-W VIGI C450 VIGI C230I Mini InSight S655I
	VIGI C220I VIGI C230I VIGI C240I VIGI C230 VIGI C240 VIGI C250
	InSight S245 InSight S285

EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce/

For technical support and other information, please visit https://www.tp-link.com/support.

Documents / Resources

tp-link InSight Network Camera Junction Box [pdf] Installation Guide InSight S445, InSight S455, InSight S485, InSight S445ZI, InS245ZI, VIGI C420I, VIGI C430I, VIGI C440I, VIGI C430, VIGI C440, VIGI C440-W, VIGI C450, VIGI C230I Mini InSight S655I, VIGI C220I, VIGI C230I, VIGI C240I, VIGI C230, VIGI C240, VIGI C250., InSight Network Camera Junction Box, InSight, Network Camera Junction Box, Camera Junction Box, Junction Box, Box

References

• User Manual