TOZO NC2 Active Noise Cancelation User Guide
Bluetooth pairing and wearing
Bluetooth pairing
Open the charging box, the left and right earbuds are automatically turned on and connected to each other. Search for the Bluetooth pairing name [TOZO-NC2] in the device and select it to complete the pairing. When use again, the earbuds will automatically reconnect to the last connected device.
wearing
- Choose the eartips that fit your ears best.
- Adjust the earbuds to fit snugly.
Smart touch control
Previous song
Volume down
Active Noise Cancellation mode/Transparent mode
Answer
Reject
Play/Pause
Next Song
Volume up
Voice assistant
Hang up
Power on/off
Power on
Power Off
Power on:
Open the cover of the charging case, the earbuds will power on automatically. Power off:
Put the earbuds into the charging case, close the cover, and automatically power off.
Reset
If you accidentally get only one earbud work, or fails to pair earch other, please reset it: Put earbuds into the charging case, open the lid, press and hold the case button for 15 seconds.
NOTE: In case there is [Connection Unsuccessful] in your devices, please delete all historical records of [TOZO-NC2] and try the paring process again.
Charging
Place case with light facing up on wireless charger. (Wireless charging pad not included)
Or charge the case via USB-C connector. (USB-C cable included)
Don’t put wet earbuds into the charging case, fully dry off the earbuds before charging.
Don’t place the case vertically.
Thank you for purchasing the TOZO authentic product. For more latest products, parts and accessories, please
visit: www.tozostore.com
For any assistance please contact Email:
info@tozostore.com
SYMBOLS
Documents / Resources
 |
TOZO NC2 Active Noise Cancelation [pdf] User Guide NC2 Active Noise Cancelation, NC2, Active Noise Cancelation, Noise Cancelation |
