TOA BT-01 Bluetooth Module
Please carefully follow the instructions in this manual to obtain the optimal usage and ensure long, trouble-free use of your equipment.
GENERAL DESCRIPTION
The BT-01 is a Bluetooth module which enables Bluetooth Connectivity for TOA’s 9000M2, 900, 700 and BG-2000 series amplifiers.
NOMENCLATURE AND FUNCTIONS
- BT Connection LED
Indicates when BT connection is Active. - Toggle Switch
Toggle up to Reset, Toggle down to Pair. - Dry Contact Control
Short 1 and 2 to Pair, Short 3 and 4 to reset. - DC Power
Power with DC Adapter. - Antenna
Connect External Antenna provided. - Power LED
Indicates when device is powered.
CAUTION
Never shut down the power supply nor remove this AC adaptor’s connector when the amplifier this module is inserted into is ready to output audio, as doing so, it may cause a noise, damage of speakers or amplifier, and hearing impairments.
SETUP
A. Insert the BT-01 into the applicable device slot.
B. Connect the antenna to the BT-01.
C. Connect the DC power to the BT-01.
D. Pair your device with the BT-01.
E. Optional: You can remotely wire the accessory wall plate for easier access for pairing and reset.
F. Optional: You can also extend the antenna cable to allow for better placement and reception (i.e. outside a rack, etc.).
SPECIFICATIONS
| Power Source | 9 volt DC external |
| Bluetooth | Version 4.2 |
| Input | 1 x Toggle switch for BT reset and pairing
2 x Dry contact (pairing and reset) |
| Operating Temperature | –40 °C ~ 85 °C |
| Finish | Clear Anodized Aluminum |
| Dimensions | 35(W) x 78(H) x 88(D)mm |
| Weight | 65 g |
Customer Support
Documents / Resources
 |
TOA BT-01 Bluetooth Module [pdf] Owner's Manual 9000M2, 900, 700, BG-2000, BT-01 Bluetooth Module, BT-01, Bluetooth Module, Module |
 |
TOA BT-01 Bluetooth Module [pdf] Owner's Manual 9000M2, 900, 700, BG-2000, BT-01 Bluetooth Module, BT-01, Bluetooth Module |
