TiPY One Hand Keyboard User Manual

Contents hide

TiPY One Hand Keyboard

Take off handpad.
Turn TiPY so is at the top right corner.Remove protective foil from battery compartment.Connect TiPY to your computer using the USB-C cable provided. lights up red. flashes red while charging. Battery is pre-charged.

Connect TIPY to your computer using the USB-C cable provided. ESC lights up red. TIPY is connected to your computer and will charge if necessary ( ESC flashes red). Disconnect USB-C cable. flashes green. Without cable, TIPY automatically searches for a Bluetooth connection. Wait for your computer to find the new Bluetooth device. Follow the instructions on the screen to pair with TIPY your computer. When connected, lights up green. In case of Bluetooth interferences, flashes very fast. In this case, remove the Bluetooth device from your computer and pair it again. The TIPY Bluetooth connection can only be removed from the computer the device is connected to.
After some time of inactivity, TIPY enters standby mode, then sleep mode. Press any key to wake TIPY from standby or sleep mode. ESC flashes red when battery is low. Both left-handers and right-handers can use TIPY. In order to switch sides, take off the handpad, turn the keyboard around, and put the handpad back on. TIPY automatically detects which side is in use and deactivates the bottom side. The mouse joystick is always located on the thumb’s side.

Press NUM to activate or deactivate the number pad. When activated, the key lights up blue.
TIPY Trainer, free to use on tipykeyboard.com