TCH332N Network Video Camera
Product Specifications
Camera Dimension: Unit:mm
Interface: Micro SD, Ethernet Port, Power
Port
Features: Built-in Mic, LED Lense, LED
Indicator, Built-in Speaker
Installation: Top loaded
Product Usage Instructions
1. Equipment Connection Power Supply
Connect the AC Adapter to the camera and to an electrical
socket. Wait for the indicator light to turn blue and for the
Speaker broadcast to start, indicating successful startup and
network configuration.
2. Download and Install Mobile APP
Scan the provided QR code to download the APP. Search for
EasyLive Plus in the app store and follow the installation
instructions.
3. Account Registration and Login
Open EasyLive Plus, click the registration button, enter your
E-mail address, and verify the code to complete registration and
login.
Safety Instructions
- Use original packaging for shipment and management.
- Avoid high pressure, high vibration, and imprisonments.
- Avoid direct contact with the image sensor.
- Do not aim the camera at extra bright places (light, sunlight,
laser). - Avoid placing the camera in extremely hot, cold, dusty, or damp
locations. - Avoid exposing the camera to high electromagnetism
radiation.
After-sales Service Policy
The warranty is applicable from the date of purchase with the
official original purchase certificate provided. For warranty
claims, clear records of date and commodity locations are
necessary.
FAQ
Q: What should I do if the camera is not connected?
A: Check for network connection errors or ensure that the
network connection is okay. Follow the troubleshooting steps in the
manual.
Q: How do I update the camera firmware?
A: Check for firmware updates in the mobile app settings or
visit the manufacturer’s website for instructions on updating the
camera firmware.
Camera Dimension
Interface
Built-in Mic LED Lense LED Indicator
Unit:mm
Micro SD
Reset (Turn forward)
Built-in Speaker Power Port
Installation(top loaded)
Quick operation
. Equipment connection power supply Connect the AC Adapter to the camera and to an electrical socket. When the indicator light in the blue light state and Speaker broadcast started successfully. It’s means that the startup is completed and the network configuration is performed.
. Download and install mobile APP Scan the QR code below to download the APP and the client may search for “EasyLive plus” in the app store. Then complete according to the instructions.
. Quick configuration of camera connection WIFI Connect your phone to Wi-Fi network, and open EasyLive Plus click “Add new device”, select “WIFI camera”, and scan the QR code of the camera bottom sticker or the box sticker, complete the addition of the device camera according to the prompts, as shown in the figure There are two ways to add: () Wireless connection, the camera connects to the router through WiFi wireless network; () Wired connection, the camera is connected to the router through the network cable; The two adding methods can be completed according to the mobile APP prompt.
Ethernet Port
Indicator status Light on Light flashing fast Light flashing slowly
Explain Camera not connected Network connection error Network connection ok
Attention: Installed on the ceiling, please ensure the ceiling can bear at lest four times the weight of equipment.
APP download QR code
. Account registration and login Open EasyLive Plus ,click the registration button in the account login interface, and enter the E-mail address and verify according to the prompts code to complete registration and login.
Note: When selecting wireless connection and wired connection, the router needs to connect Internet, the camera is connected to the Internet after the addition is successful
Safety Instruction
Cautions
Disclaimer
Warranty Card Thank you for choosing our products. This warranty card is our company’s solemn
These instructions are intended to ensure that user can use the product correctly to avoid danger and property loss. Please carefully read this guidance and keep it for future reference before operating the device. The manual is designed to instruct users to facilitate installation. The interface in details depends on the exact product. The latest version will be updated regularly according to the software and hardware improvement of our product. Updated information will be updated in the latest version of this manual without prior notice. The precaution measure is divided into “Warnings” and “Cautions”
Warnings
Follow these precautions to prevent potential injury or material damage. .Original package must be used for shipment and management to avoid
high pressure, high vibration and imprisonments .Avoid direct contact with image sensor. Cover the dust cap while not
. The company has tried its best to ensure the completeness and accuracy of
the contents contained in the Manual. For any doubt or dispute, please refer to the company’s nal explanation. . The company will keep the contents contained in this
Manual up-to-date in accordance with product enhancements and will
commitment to you, and based on this, the company provides you with standard warranty services. It is strongly recommended that you read the instructions carefully before using the product and operate it correctly.
Warranty Policy
The warranty applies with the warranty card supplied.
operating.
periodically improve or update the products or procedures described in this
.Do not aim the camera at the extra bright places (light, sunlight, laserM)anual. The updated contents will be reected in the latest version of this
in case of aecting the endurance of CMOS at the same time.
Manual without prior notice.
.Do not place the camera in extremely hot, cold, dusty or damp
. The contents contained in this Manual are for reference and guidance only
After-sales Service Policy
This warranty is applicable to the product from the date of purchase, but the ocial original purchase certicate shall be provided. If the ocial original purchase certicate cannot be provided or the record (date, commodity
locations, and do not expose it to high electromagnetism radiation.
for users. It is not guaranteed to be exactly the same with the real product. Thename) is not clear, the company will dene the warranty period based on the product
.To avoid heat accumulation, good ventilation is required for operating real product shall prevail.
information.
environment.
. The parts, components and accessories mentioned in this Manual are for
. Ensure that the installation location is kept at a sucient distance firlolmustration purposes only and do not represent the congurations of your
the surrounding electromagnetic sensitive equipment to prevent
purchased model.
After-sales Service Policy
· According to the national regulations, users enjoy the warranty services for the quality problems within the warranty period.
electromagnetic interference.
Follow these safeguards to prevent serious injury or death.
.Keep the camera away from liquid while on using.
Warnings
. Input voltage should meet both the SELV (Safety Extra
Original package during shipment is strongly recommended.
Low Voltage)
.Any replacement of the device battery or the use of a mismatched type Caution: Risk of explosion if the battery is replaced by an incorrect type
. Contact the distributor for abnormal operation. Do Not disassemble or may cause irreversible damage to the device.
· replacement of a battery with an incorrect type that can defeat a safeguard
modify the devices in any way. .Moisture must be avoided for
indoor
devices
in
case
of
re
and
. electricthe
Modify the default login password loss caused by weak password.
when
rst
login
the
device
to
avoid (for example, · disposal of
in the case of a battery into
some re
lithium battery types); or a hot oven, or mechanically
crushing
or
shock.
.When the Micro SD is used, it is recommended to use a special video cutting of a battery,that can result in an explosion;
. Install the equipment on the ceiling to ensure that it can withstand atsurveillance
least times the weight of the equipment.
Micro SD card to avoid after sales maintenance arising from the rapid
. Moisture must be avoided for indoor devices in case of re and electridcamage of ordinary
* leaving a battery in an extremely high temperature surrounding environment that can result in anexplosion or the leakage of ammable liquid or gas;
– a battery subjected to extremely low air pressure that may result in an exlosion or the leakage of ammable liquid or gas
shock.
Micro SD cards.
· The followings shall not be covered by the warranty: · Exceeding warranty · Physical damage due to improper use or storage · Failure or damage caused during transport, loading/unloading or handling · Repair or modication by non-professionals · Failure or damage caused by negligence, violation of operation rules or misoperation · Failure or damage caused by force majeure factors (Fire, earthquake, lightning strike) · No warranty over accessories such as fuse and battery · Products not maintained by the company
X high-quality service The company reserves the right of nal evaluation of product failure
Documents / Resources
 | TCH332N Network Video Camera |
References
- User Manualmanual.tools