THORN AFP2 S-M-L Large Spaces LED Projector Installation Guide
K Installation instructions
TYPE : AFP2 S-M-L
Regulations Australia / New Zealand wind speeds 250 km/h Tilting limited :
The luminaire with clear optic should be positioned so that prolonged staring into the luminaire at a distance <1.5 m is not expected
| AFP2 | |||||||
| QE”4– E | B mm |
B1 mm |
H mm |
mm | H1W(kg) | SCx (at 90°) |
|
| S | 375 | 285 | 145 | 62.5 | 208 | 7,6 | 0,165 |
| M | 389 | 435 | 145 | 62.5 | 208 | 10,6 | 0,223 |
| L | 389 | 585 | 145 | 62.5 | 232 | 14 | 0,285 |
- AFP2 S-M-L
- AFP2 S-M-L
- CLASS I Standard
- CLASS I HFX
- CLASS I BPL/LRT
- CLASS I BS
- CLASS II Standard
- CLASS II HFX
- CLASS II BPL/LRT
- CLASS II BS
- AFP2 S-M-L
- AFP2 S-M-L
- AFP2 S-M-L
- FP2 S-M-L
- AFP2 L
Replace any cracked protective shield. -Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
WARNING:
Class I luminaires must be
earthed. This luminaire operates at mains voltage which must be switched off before intervention in control gear. -Any modification to this luminaire is forbidden. -Lighted objects nearer than the minimal distance in the is forbidden.
Documents / Resources
 |
THORN AFP2 S-M-L Large Spaces LED Projector [pdf] Installation Guide AFP2 M 60L70-740 A4 CL2 GY, AFP2 S-M-L, AFP2 S-M-L Large Spaces LED Projector, Large Spaces LED Projector, Spaces LED Projector, LED Projector, Projector |
