THINKWARE Q1000 Wi-Fi Dash Cam User Guide
Power the Dash Cam
Use one of the following options
The included cable options vary depending on the dash cam model purchased
12 V Power Cable
Hard wiring Cable*
OB D -II Cable*
To enable Parking Survelance mode, the dash cam needs 10 be powered by either the 0BD-I Cable or Hardwiring Cable professional instalation recommended).
Download the App
Download the THINKWARE DASHCAM LINK App
On your smartphone, open the Google Play Store or Apple App Store and download and install THINKWARE DASH CAM LINK.
THINKWARE DASH CAM LINK
Apple Store (iOS)
Google Play Store (Android)
Connect to the App
Follow the on-screen instructions
- Press the Wi-Fi button on the Dash Cam.
Won’t connectto the App?
Install the Front Camera
How to Install
Open Live View in the app
- Blue line with the center
- Green line with the front edge of the hood
Install the Rear View Camera
Open Live View Rear Camera in App
- Red line with the trunk center
- Yellow line with the center of the horizon
- Green line with the trunk line
Dash Cam Settings in the App
Default settings out of the box
The default settings are as follows, and you have the option to adjust them according to your preference.
| Options | Description |
| Voice Recording | Enabled |
| System Volume | 0123 |
| Parking Mode | Disabled |
| Super Night Vision | Parking Mode |
| ADAS | Disabled |
| Speed Stamp | Enabled |
| Safety Camera | Enabled |
FAQ & Help Desk
Still have questions or issues?
For further assistance or to report any issues, please contact our support team.
- North America
1 844-865-9273
support@thinkware.com - United Kingdom
44 (0) 333-121-0008
support.eu@thinkware.com - European Union
(+49) 69-943-22200
support@thinkware.com
FAQs & Help Desk
Please refer to CS Information QR in the box for other countries.
Documents / Resources
 |
THINKWARE Q1000 Wi-Fi Dash Cam [pdf] User Guide Q1000 Wi-Fi Dash Cam, Q1000, Wi-Fi Dash Cam, Dash Cam, Cam |