JBL Boombox 3 Quick Start Guide

What's in the Box

The package includes the JBL Boombox 3 speaker and a power cord. Note that the quantity of power cords and plug types may vary by region.

Bluetooth Pairing

To pair your device with the JBL Boombox 3:

1. Press and hold the Bluetooth button on the speaker for a few seconds until the Bluetooth indicator light flashes.
2. On your smartphone or other Bluetooth-enabled device, go to Bluetooth settings, turn Bluetooth ON, and select "JBL Boombox 3" from the list of available devices.
3. Once connected, the Bluetooth indicator light will turn solid blue.

Play

Control your music playback directly from the speaker:

• Press the Play/Pause button (▷/II) once to play or pause music.
• Press the Next Track button (▷▷) twice to skip to the next track.
• Press the Previous Track button (KK) twice to go to the previous track.
• Adjust volume using the Volume Up (+) and Volume Down (-) buttons.

Charging

To charge the JBL Boombox 3, connect the power cord to the speaker's AC input and plug it into a power outlet. The battery indicator will show the charging status. A full charge takes approximately 6.5 hours.

Powerbank Functionality

The JBL Boombox 3 can also function as a power bank to charge other devices. Connect your device to the USB-A port on the speaker using a USB cable.

Waterproof and Dustproof (IP67)

The JBL Boombox 3 is rated IP67, meaning it is waterproof and dustproof. It can be submerged in water up to 1 meter for up to 30 minutes. Ensure all ports are dry and clean before charging or connecting to other devices.

JBL Portable App

Enhance your experience with the JBL Portable app. Use the app for speaker configuration and software upgrades. Download it from the Google Play Store or the Apple App Store.

Technical Specifications

Transducers: 189 x 114 mm Subwoofer, 2 x 80.9 x 80.9 mm Midrange/ 2 x 2.75 inch, 2 x 20 mm Tweeter/ 2 x 0.75 inch

Output power: 1 x 80 W RMS-subwoofer + 2 x 40 W RMS-midrange + 2 x 10 W RMS-tweeter (AC mode); 1 x 60 W RMS-subwoofer + 2 x 30 W RMS-midrange + 2 x 8 W RMS-tweeter (Battery mode)

Power input: 100 - 240 Vac; 50/60 Hz;

Frequency response: 40 Hz - 20 kHz

Signal-to-noise ratio: > 80 dB

Battery type: Li-ion polymer 69.12 Wh (equivalent to 7.2 V / 9600 mAh)

Battery charge time: 6.5 hours

Music play time: Up to 24 hours (dependent on volume level and audio content)

Connection ports: AC-in, USB-A, Aux-in

Cable type: AC Power Cable

Cable length: 2000 mm / 78.7"

USB charge out: 5V / 2A (maximum)

Bluetooth® version: 5.3

Bluetooth® profile: A2DP 1.3, AVRCP 1.6

Bluetooth® transmitter frequency range: 2.4 GHz - 2.4835 GHz

Bluetooth® transmitter power: ≤ 9 dBm (EIRP)

Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK

Product dimensions (W x H x D): 482.4 x 256.9 x 199.7 mm / 19.0 x 10.1 x 7.9"

Net weight: 6.7 kg / 14.7 lbs

Packaging dimensions (W x H x D): 565 x 324 x 256.5 mm / 22.2 x 12.8 x 10.1"

Gross weight: 9.74 kg / 21.47 lbs

Maximum operation temperature: 45 °C

Important Safety Information

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Do not expose the JBL Boombox 3 to liquids without removing cable connection. Do not expose JBL Boombox 3 to water while charging. It may result in permanent damage to the speaker or power source.

Chemicals, salt or "foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it's completely dry and clean. Charging when wet might damage your speaker.

Regulatory Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This product is homologated by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements.

For more information, consult the Anatel website – www.anatel.gov.br

This equipment does not have the right to protection against harmful interference and cannot cause interference in duly authorized systems.

Attention: according to Brazilian law no. 11.291, prolonged exposure to noise levels above 85dB may cause damage to the auditory system.