JBL Boombox

Warnings and Important Notes

This device is resistant to water splashes and environmental moisture. It is strongly recommended to avoid submerging the device in water.

If all safety precautions are followed, this device is designed to be waterproof and can withstand submersion in water for a short period and limited depth, provided that:

• 1. The device has not been dropped and its waterproof seal is intact.
• 2. The device is not charging.
• 3. The port cover is closed.

Water damage due to non-compliance with the mentioned points can be easily identified and will be diagnosed by company experts. It is evident that any damage or malfunction occurring due to lack of knowledge about correct usage will void the warranty.

[Diagram Description: A hand is shown trying to submerge the speaker in water, with a red 'X' symbol indicating prohibition. Another diagram shows a hand pointing to a closed port cover.]

Package Contents

• One JBL Boombox portable music player
• One power adapter and cable
• Quick start guide

Buttons

• Play/Pause Music / Answer Phone Call Button
• Volume Up Button
• JBL Connect+ Button
• Power On/Off Button
• Volume Down Button
• Bluetooth Button

[Diagram Description: Illustration of the speaker showing the location of various buttons.]

Sound Mode

Press the Sound Mode button to switch between Indoor and Outdoor sound modes.

[Diagram Description: The speaker is shown with a button labeled for selecting 'Indoor' or 'Outdoor' sound modes, indicated by a hand icon.]

Connections

• Power adapter input for charging the device battery
• Output for charging mobile and tablet
• Input for firmware upgrade only
• Audio input with 3.5mm jack (Aux-in)

[Diagram Description: Shows the speaker's connection ports: power input, USB output for charging devices, and a dedicated input for firmware upgrades. Also shows the Aux-in port.]

Bluetooth

Press and hold the Bluetooth button to put the device in Pairing mode for connecting to other devices.

[Diagram Description: A smartphone with a Bluetooth icon is shown connecting wirelessly to the JBL Boombox speaker.]

Music Control

[Diagram Description: Illustrations show buttons for controlling music playback: Play/Pause, Next Track, Previous Track.]

Answering Phone Calls

Press the button below to answer calls.

Then speak into the device's microphone as shown below.

[Diagram Description: An illustration shows a phone icon with arrows pointing to the speaker, indicating call handling. Another shows a microphone icon with sound waves, indicating speaking into the device.]

Voice Assistant

After installing the JBL Connect app on your mobile, navigate to the Voice Assistant section. Tapping the 'D' button on the device will activate Google Assistant or Siri on your phone. Press the 'D' button on the device to activate your voice assistant. Ensure your voice assistant is already enabled on your mobile.

[Diagram Description: Shows the JBL Connect app interface on a smartphone, and an illustration of activating the voice assistant via the 'D' button on the speaker.]

JBL Connect+

This feature wirelessly connects more than a hundred similar devices to each other.

Step 1: Connect your phone via Bluetooth to Speaker A.

Step 2: Press the JBL Connect+ button on Speaker A and then on all other connected devices. All devices will play the same music.

[Diagram Description: Illustrates connecting multiple JBL Boombox speakers wirelessly using the JBL Connect+ feature. Step 1 shows a phone connected to Speaker A. Step 2 shows Speaker A connected to Speakers B, C, and D.]

JBL Connect App

This app allows stereo setup, device firmware updates, and device renaming.

Status Lights

Power

• On: White On (? White On)
• Standby: White Flash (? White Flash)
• Bluetooth Pairing: Blue Flash (? Blue Flash)
• Bluetooth Connected: Blue On (? Blue On)

Connect+

• Broadcasting Status: White On (? White On)

Sound mode

• Indoor: White On (? White On)
• Outdoor: White On (? White On)

Device Specifications: Boombox

• Bluetooth version: 4.2
• Support: A2DP 1.3 AVRCP 1.6 HFP 1.6
• Transducers: 4 inch woofer x 2, 20mm Tweeter x 2
• Output power: 2x30W(AC mode); 2x20W(Battery mode)
• Frequency response: 50Hz-20kHz
• Signal-to-noise ratio: 80dB
• Power supply: 20V/4A
• Battery type: Lithium-ion polymer (74Wh)
• Battery charge time: <6.5 hours
• Music playing time: up to 24 hours (Varies by volume level and music content)
• Bluetooth transmitter power: 0-9dBm
• Bluetooth transmitter frequency range: 2.402GHz-2.480GHz
• Bluetooth transmitter modulation: GFSK, 8DPSK, π/4DQPSK
• Dimensions (H x W x D): 254.5 x 495 x 195.5mm
• Weight: 5.25KG