Juniper-NETWORKS-LOGO

Juniper NETWORKS 3.4.0 Juniper Address Pool Manager

Juniper-NETWORKS-3-4-0-Juniper-Address-Pool-Manager-PRODUCT

Маълумот оид ба маҳсулот

Мушаххасоти

  • Категория: Суроға мудири ҳавзи
  • Версия: 3.4.0
  • Нашр шудааст: 2025-06-03
  • Кластер: Single cluster with 3 hybrid nodes
  • Kubernetes Node: 16-core node for running APM and companion applications
  • Нигоҳдорӣ: jnpr-bbe-storage
  • Network Load Balancer Address: One for APMi
  • Container Image Storage Requirement: Approximately 3 gigabytes (GiB) per APM release

Дастурҳои истифодаи маҳсулот

Насбкунӣ

  • Address Pool Manager 3.4.0 installation requires the minimum system requirements listed in the user manual.

Талаботи иловагӣ

  • Ensure to meet all additional requirements specified in the installation guide.

Cluster Setup

  • To set up a single geographical cluster for APM, follow the specifications provided in Table 1 of the user manual.

Kubernetes Node Configuration

  • Use a 16-core node for running APM and other companion applications concurrently.

Танзимоти нигаҳдорӣ

  • Create a storage class named jnpr-bbe-storage for APM usage.

Network Load Balancer

  • Configure a network load balancer address for APMi.

Container Image Storage

  • Ensure to have sufficient storage space for container images.
  • Each APM release requires approximately 3 gigabytes (GiB) of storage.

Муқаддима

  • Juniper Address Pool Manager (APM) is a cloud-native, container-based application running on a Kubernetes cluster that manages address pools in a network.
  • APM monitors the IPv4 address pools on broadband network gateways (BNGs) in the network.
  • When the free address utilization drops below a specified threshold on a BNG, APM adds unused prefixes from a centralized pool to the BNG’s address pool.
  • APM, in cooperation with the BNG, monitors and links address pools in support of dynamic address allocation mechanisms for subscribers.

Манфиатҳои APM инҳоянд:

  • Самаранокии истифодаи адресро баланд мебардорад
  • Хароҷоти изофӣ ва мураккабии мониторинг ва таъминотро тавассути автоматикунонии мониторинг ва таъминот коҳиш медиҳад.
  • Имкон медиҳад, ки префиксҳои истифоданашуда аз нав тақсим карда ба ҳавзҳое, ки ба онҳо эҳтиёҷ доранд.
  • Enables APM to work with the BNG CUPS Controller.
  • These release notes accompany Juniper Address Pool Manager Release 3.4.0

Насбкунӣ

  • Address Pool manager 3.4.0 installation requires the minimum system requirements listed in this section.
  • ШАРҲ: The system requirements listed in Table 1 on page 2 are for a single geographically located installation of Address Pool Manager (APM).
  • For the system requirements of a multiple geographically located, multiple cluster setup, see Address Pool Manager Installation Guide.
  • APM installs on a Kubernetes cluster comprised of physical or virtual machines (VMs).
  • APM has been qualified against the single geographical cluster described in Table 1.
  • For information on how to install APM, see Address Pool Manager Installation Guide.

Table 1: Single Geographical Cluster Specifications

Категория Тафсилот
Кластер A single cluster with 3 hybrid nodes.
Kubernetes node The Kubernetes nodes require the following:

 •   For the operating system, you can use either of the following:

•   Ubuntu 22.04 LTS (for a BBE Cloud setup cluster)

 • Red Hat Enterprise Linux CoreOS (RHCOS) 4.15 ё дертар (барои кластери OpenShift Container Platform)

 •   CPU: 8 or 16 cores.

 Use a 16-core node if you plan on running other applications on the cluster (such as the BNG CUPS Controller application).

 •   Memory: 64 GB

 •   Storage: 512 GB storage partitioned as 128 GB root (/), 128 GB /var/lib/docker, and 256 GB /mnt/ longhorn(application data

 •   Kubernetes role: Control plane etcd function and worker node

 This specification establishes a cluster that can run APM as well as its companion applications, such as BBE Event Collection and Visualization, and BNG CUPS Controller simultaneously.

Категория Тафсилот
Ҷаҳиш мизбон The jump host requires the following:

• Operating system: Ubuntu version 22.04 LTS or later

•   CPU: 2-core

 •   Memory: 8 gigabytes (GiB)

 •   Storage: 128 gigabytes (GiB)

 •   Installed software:

 •   Python3-venv

 •   Helm utility

 •   Docker utility

 •   OpenShift CLI. Required if you are using a Red Hat OpenShift Container Platform cluster.

Cluster software The cluster requires the following software:

 •   RKE version 1.3.15 (Kubernetes 1.24.4)— Kubernetes distribution

 •   MetalLB version 0.13.7—Network load balancer

 •   Keepalived version 2.2.8—Kubelet HA VIP Controller

 •   Longhorn version 1.2.6—CSI

 •   Flannel version 0.15.1—CNI

 •   Registry version 2.8.1—Container registry

 •   OpenShift version 4.15+—Kubernetes Distribution for RHOCP. Uses compatible versions of Longhorn (CSI), MetalLB, OVN (CNI), and OpenShift Image Registry

Категория Тафсилот
Jump host software The jump host requires the following software:

 •   Kubectl version 1.28.6+rke2r1—Kubernetes client

 •   Helm version 3.12.3—Kubernetes package manager

 •   Docker-ce version 20.10.21—Docker engine

 •   Docker-ce-cli version 20.10.21—Docker engine CLI

 •   OpenShift version 4.15+—Kubernetes distribution for RHOCP clusters.

Нигоҳдорӣ A storage class named jnpr-bbe-storage.
Network load balancer address One for APMi.
Registry storage Each APM release requires approximately 3 gigabytes (GiB) of container images.

Талаботи иловагӣ

  • The BNG is a Juniper Networks MX Series router running Junos or a Juniper BNG CUPS Controller (BNG CUPS Controller).

We recommend the following releases:

  • Junos OS Release 23.4R2-s5 or later
  • BNG CUPS Controller 24.4R1 or later
  • For APM, confirm that you have a juniper.net user account with permissions to download the APM software package.
  • Download and install the APM software from a machine that will not be part of the Kubernetes cluster.

Хусусиятҳои нав ва тағирёфта

  • We have introduced the following new feature in APM 3.4.0.
  • Support for geographic redundancy—Address Pool Manager can maintain continuous operation across multiple geographically distributed Kubernetes clusters.
  • By utilizing a multiple cluster architecture managed by Karmada for orchestration and Submariner for inter-cluster networking, APM can failover if a data center outagд ба амал меояд.

Масъалаҳои кушода

  • Learn about the open issues in Address Pool Manager 3.4.0
  • Deleting an entity-match entry does not completely clean up the show apm entity output. PR1874241
  • An in-service upgrade of the BBE-observer triggers a rollout. As part of an in-service upgrade of the observer microservice, it may appear as if all APM microservices are being upgraded.
  • The list of container images loaded or pushed in the rollout output indicates that all the microservices are being upgraded, but only the observer microservice is upgraded.
  • Other container images that are being loaded or pushed are not upgraded. PR1879715
  • Reverting network load balancer (MetalLB) annotations, followed by performing a rollout, does not reset the external IP address for the APMi.

Роҳи ҳалли:

  • When the external address of the APMi that is bound to a particular IPAddressPool through the network load balancer annotations needs to be reverted to use an auto-assign IPAddressPool by removing the annotations, a stop command, and then a rollout command of APM must be performed.
  • PR1836255

Дархости дастгирии техникӣ

  • Дастгирии техникии маҳсулот тавассути Маркази кӯмаки техникии Juniper Networks (JTAC) дастрас аст.
  • Агар шумо муштарӣ бошед, ки шартномаи дастгирии фаъоли Juniper Care ё Хидматҳои Дастгирии Шарикро дорад ё таҳти кафолат фаро гирифта шуда бошед ва ба дастгирии техникии пас аз фурӯш ниёз доред, шумо метавонед ба воситаҳо ва захираҳои мо онлайн дастрасӣ пайдо кунед ё парвандаро бо JTAC кушоед.
  • JTAC policies—For a complete understanding of our JTAC procedures and policies, review Дастури корбарии JTAC воқеъ дар https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
  • Кафолатҳои маҳсулот—For product warranty information, visit https://www.juniper.net/support/warranty/.
  • JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.

Воситаҳо ва захираҳои худкӯмаки онлайн

Эҷоди дархости хидматӣ бо JTAC

  • Шумо метавонед дархости хидматиро бо JTAC дар Web ё ба воситаи телефон.
  • Ташриф https://support.juniper.net/support/requesting-support/
  • Call 1888314JTAC (18883145822 toll-free in the USA, Canada, and Mexico).
  • Барои имконоти байналмиллалӣ ё занги мустақим дар кишварҳое, ки рақамҳои ройгон надоранд, нигаред https://support.juniper.net/support/requesting-support/.
  • Juniper Networks, логотипи Juniper Networks, Juniper ва Junos тамғаҳои ба қайд гирифташудаи Juniper Networks, Inc. дар Иёлоти Муттаҳида ва дигар кишварҳо мебошанд.
  • All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners.
  • Juniper Networks барои ҳама гуна иштибоҳҳо дар ин ҳуҷҷат масъул нест. Juniper Networks ҳуқуқ дорад бидуни огоҳӣ ин нашрияро тағир диҳад, тағир диҳад, интиқол диҳад ё ба тариқи дигар таҷдиди назар кунад.
  • Copyright © 2025 Juniper Networks, Inc. Ҳама ҳуқуқ маҳфуз аст.

Саволҳои зуд-зуд додашаванда

  • Савол: Чӣ бояд кард, агар ман ҳангоми насб бо мушкилот рӯ ба рӯ шавам?
    • A: Refer to the Open Issues section in the user manual for troubleshooting tips or contact technical support for assistance.
  • Q: Can I run other applications on the same Kubernetes cluster as APM?
    • A: Yes, you can run other applications on the cluster, but ensure to use a 16-core node as per the specifications.

Ҳуҷҷатҳо / Сарчашмаҳо

Juniper NETWORKS 3.4.0 Juniper Address Pool Manager [pdf] Дастури корбар
APM-3-4-0, 3.4.0 Juniper Address Pool Manager, 3.4.0, Juniper Address Pool Manager, Address Pool Manager, Pool Manager, Manager

Иқтибосҳо

Назари худро гузоред

Суроғаи почтаи электронии шумо нашр намешавад. Майдонҳои зарурӣ қайд карда шудаанд *