Juniper NETWORKS 3.4.0 የጥድ አድራሻ ገንዳ አስተዳዳሪ
የምርት መረጃ
ዝርዝሮች
- ምድብ፡ አድራሻ ገንዳ አስተዳዳሪ
- ስሪት፡ 3.4.0
- የታተመ 2025-06-03
- ክላስተር Single cluster with 3 hybrid nodes
- የኩበርኔትስ መስቀለኛ መንገድ፡ 16-core node for running APM and companion applications
- ማከማቻ፡ jnpr-bbe-ማከማቻ
- የአውታረ መረብ ጭነት ሚዛን ሰጪ አድራሻ፡- One for APMi
- የመያዣ ምስል ማከማቻ መስፈርት፡ Approximately 3 gigabytes (GiB) per APM release
የምርት አጠቃቀም መመሪያዎች
መጫን
- Address Pool Manager 3.4.0 installation requires the minimum system requirements listed in the user manual.
ተጨማሪ መስፈርቶች
- Ensure to meet all additional requirements specified in the installation guide.
የክላስተር ማዋቀር
- To set up a single geographical cluster for APM, follow the specifications provided in Table 1 of the user manual.
የኩበርኔትስ መስቀለኛ መንገድ ውቅረት
- Use a 16-core node for running APM and other companion applications concurrently.
የማከማቻ ማዋቀር
- ለAPM አጠቃቀም jnpr-bbe-storage የሚባል የማከማቻ ክፍል ይፍጠሩ።
የአውታረ መረብ ጭነት ሚዛን
- ለAPMi የአውታረ መረብ ጭነት ሚዛን አድራሻን ያዋቅሩ።
የመያዣ ምስል ማከማቻ
- ለመያዣ ምስሎች በቂ የማከማቻ ቦታ መኖሩን ያረጋግጡ።
- Each APM release requires approximately 3 gigabytes (GiB) of storage.
መግቢያ
- Juniper Address Pool Manager (APM) is a cloud-native, container-based application running on a Kubernetes cluster that manages address pools in a network.
- APM monitors the IPv4 address pools on broadband network gateways (BNGs) in the network.
- When the free address utilization drops below a specified threshold on a BNG, APM adds unused prefixes from a centralized pool to the BNG’s address pool.
- APM, in cooperation with the BNG, monitors and links address pools in support of dynamic address allocation mechanisms for subscribers.
የ APM ጥቅሞች እንደሚከተለው ናቸው.
- የአድራሻ አጠቃቀምን ውጤታማነት ያሻሽላል
- ቁጥጥር እና አቅርቦትን በራስ ሰር በማዘጋጀት የክትትል እና አቅርቦትን ወጪ እና ውስብስብነት ይቀንሳል።
- ጥቅም ላይ ያልዋሉ ቅድመ-ቅጥያዎችን ለሚያስፈልጋቸው ገንዳዎች እንደገና ለማሰራጨት ይፈቅዳል።
- Enables APM to work with the BNG CUPS Controller.
- These release notes accompany Juniper Address Pool Manager Release 3.4.0
መጫን
- የአድራሻ ገንዳ አስተዳዳሪ 3.4.0 መጫን በዚህ ክፍል የተዘረዘሩትን አነስተኛውን የስርዓት መስፈርቶች ይፈልጋል።
- ማስታወሻ፡- The system requirements listed in Table 1 on page 2 are for a single geographically located installation of Address Pool Manager (APM).
- For the system requirements of a multiple geographically located, multiple cluster setup, see Address Pool Manager Installation Guide.
- APM installs on a Kubernetes cluster comprised of physical or virtual machines (VMs).
- APM has been qualified against the single geographical cluster described in Table 1.
- For information on how to install APM, see Address Pool Manager Installation Guide.
Table 1: Single Geographical Cluster Specifications
ምድብ | ዝርዝሮች |
ክላስተር | ነጠላ ዘለላ ባለ 3 ድብልቅ ኖዶች። |
የኩበርኔትስ መስቀለኛ መንገድ | የ Kubernetes ኖዶች የሚከተሉትን ያስፈልጋቸዋል:
• For the operating system, you can use either of the following: • Ubuntu 22.04 LTS (for a BBE Cloud setup cluster) • Red Hat Enterprise Linux CoreOS (RHCOS) 4.15 ወይም ከዚያ በላይ (ለOpenShift Container Platform ክላስተር) • CPU: 8 or 16 cores. Use a 16-core node if you plan on running other applications on the cluster (such as the BNG CUPS Controller application). • Memory: 64 GB • Storage: 512 GB storage partitioned as 128 GB root (/), 128 GB /var/lib/docker, and 256 GB /mnt/ longhorn(application data • Kubernetes role: Control plane etcd function and worker node This specification establishes a cluster that can run APM as well as its companion applications, such as BBE Event Collection and Visualization, and BNG CUPS Controller simultaneously. |
ምድብ | ዝርዝሮች |
አስተናጋጅ ዝለል | The jump host requires the following:
• Operating system: Ubuntu version 22.04 LTS or later • CPU: 2-core • Memory: 8 gigabytes (GiB) • Storage: 128 gigabytes (GiB) • Installed software: • Python3-venv • Helm utility • Docker utility • OpenShift CLI. Required if you are using a Red Hat OpenShift Container Platform cluster. |
ክላስተር ሶፍትዌር | ክላስተር የሚከተለውን ሶፍትዌር ይፈልጋል፡-
• RKE version 1.3.15 (Kubernetes 1.24.4)— Kubernetes distribution • MetalLB version 0.13.7—Network load balancer • Keepalived version 2.2.8—Kubelet HA VIP Controller • Longhorn version 1.2.6—CSI • Flannel version 0.15.1—CNI • Registry version 2.8.1—Container registry • OpenShift version 4.15+—Kubernetes Distribution for RHOCP. Uses compatible versions of Longhorn (CSI), MetalLB, OVN (CNI), and OpenShift Image Registry |
ምድብ | ዝርዝሮች |
የአስተናጋጅ ሶፍትዌር ይዝለሉ | The jump host requires the following software:
• Kubectl version 1.28.6+rke2r1—Kubernetes client • Helm version 3.12.3—Kubernetes package manager • Docker-ce version 20.10.21—Docker engine • Docker-ce-cli version 20.10.21—Docker engine CLI • OpenShift version 4.15+—Kubernetes distribution for RHOCP clusters. |
ማከማቻ | jnpr-bbe-storage የሚባል የማከማቻ ክፍል። |
የአውታረ መረብ ጭነት ሚዛን አድራሻ | አንድ ለAPMi |
የመመዝገቢያ ማከማቻ | Each APM release requires approximately 3 gigabytes (GiB) of container images. |
ተጨማሪ መስፈርቶች
- The BNG is a Juniper Networks MX Series router running Junos or a Juniper BNG CUPS Controller (BNG CUPS Controller).
We recommend the following releases:
- Junos OS Release 23.4R2-s5 or later
- BNG CUPS Controller 24.4R1 or later
- For APM, confirm that you have a juniper.net user account with permissions to download the APM software package.
- Download and install the APM software from a machine that will not be part of the Kubernetes cluster.
አዲስ እና የተለወጡ ባህሪዎች
- We have introduced the following new feature in APM 3.4.0.
- Support for geographic redundancy—Address Pool Manager can maintain continuous operation across multiple geographically distributed Kubernetes clusters.
- By utilizing a multiple cluster architecture managed by Karmada for orchestration and Submariner for inter-cluster networking, APM can failover if a data center outagሠ ይከሰታል.
ክፍት ጉዳዮች
- Learn about the open issues in Address Pool Manager 3.4.0
- Deleting an entity-match entry does not completely clean up the show apm entity output. PR1874241
- An in-service upgrade of the BBE-observer triggers a rollout. As part of an in-service upgrade of the observer microservice, it may appear as if all APM microservices are being upgraded.
- The list of container images loaded or pushed in the rollout output indicates that all the microservices are being upgraded, but only the observer microservice is upgraded.
- Other container images that are being loaded or pushed are not upgraded. PR1879715
- Reverting network load balancer (MetalLB) annotations, followed by performing a rollout, does not reset the external IP address for the APMi.
የማጣራት ስራ፡
- When the external address of the APMi that is bound to a particular IPAddressPool through the network load balancer annotations needs to be reverted to use an auto-assign IPAddressPool by removing the annotations, a stop command, and then a rollout command of APM must be performed.
- PR1836255
የቴክኒክ ድጋፍ መጠየቅ
- የቴክኒክ ምርት ድጋፍ በ Juniper Networks Technical Assistance Center (JTAC) በኩል ይገኛል።
- ንቁ የጁኒፐር እንክብካቤ ወይም የአጋር ድጋፍ አገልግሎቶች ድጋፍ ውል ያለዎት ደንበኛ ከሆኑ ወይም በዋስትና ከተሸፈኑ እና ከሽያጩ በኋላ ቴክኒካል ድጋፍ የሚፈልጉ ከሆነ የእኛን መሳሪያ እና ግብዓቶች በመስመር ላይ ማግኘት ወይም በJTAC ጉዳይ መክፈት ይችላሉ።
- JTAC policies—For a complete understanding of our JTAC procedures and policies, review የJTAC የተጠቃሚ መመሪያ የሚገኘው በ https://www.juniper.net/us/en/local/pdf/resource-guides/7100059-en.pdf.
- የምርት ዋስትናዎች—For product warranty information, visit https://www.juniper.net/support/warranty/.
- JTAC hours of operation—The JTAC centers have resources available 24 hours a day, 7 days a week, 365 days a year.
ራስ አገዝ የመስመር ላይ መሳሪያዎች እና መርጃዎች
- For quick and easy problem resolution, Juniper Networks has designed an online self-service portal called the Customer Support Center (CSC) that provides you with the following features.
- የCSC አቅርቦቶችን ያግኙ፡- https://www.juniper.net/customers/support/
- ፈልግ የታወቁ ሳንካዎች https://prsearch.juniper.net/
- የምርት ሰነድ አግኝ፡ https://www.juniper.net/documentation/
- የእኛን የእውቀት መሰረት በመጠቀም መፍትሄዎችን ይፈልጉ እና ጥያቄዎችን ይመልሱ፡ https://supportportal.juniper.net/s/knowledge
- የቅርብ ጊዜዎቹን የሶፍትዌር ስሪቶች ያውርዱ እና እንደገናview የመልቀቂያ ማስታወሻዎች https://www.juniper.net/customers/csc/software/
- ለሚመለከታቸው የሃርድዌር እና የሶፍትዌር ማሳወቂያዎች ቴክኒካዊ ማስታወቂያዎችን ይፈልጉ፡ https://supportportal.juniper.net/s/knowledge
- በ Juniper Networks የማህበረሰብ መድረክ ላይ ይቀላቀሉ እና ይሳተፉ፡ https://www.juniper.net/company/communities/
- የመስመር ላይ የአገልግሎት ጥያቄ ፍጠር፡- https://supportportal.juniper.net/
- የአገልግሎት መብትን በምርት መለያ ቁጥር ለማረጋገጥ የእኛን የመለያ ቁጥር መብት (SNE) መሳሪያ ይጠቀሙ፡- https://entitlementsearch.juniper.net/entitlementsearch/
ከJTAC ጋር የአገልግሎት ጥያቄ መፍጠር
- በ JTAC ላይ የአገልግሎት ጥያቄ መፍጠር ትችላለህ Web ወይም በስልክ.
- ጎብኝ https://support.juniper.net/support/requesting-support/
- Call 1888314JTAC (18883145822 toll-free in the USA, Canada, and Mexico).
- ከክፍያ ነጻ ቁጥሮች በሌሉባቸው አገሮች ውስጥ ለአለም አቀፍ ወይም ቀጥታ መደወያ አማራጮች ይመልከቱ https://support.juniper.net/support/requesting-support/.
- Juniper Networks፣ Juniper Networks አርማ፣ ጁኒፐር እና ጁኖስ በዩናይትድ ስቴትስ እና በሌሎች ሀገራት የ Juniper Networks Inc. የንግድ ምልክቶች ናቸው።
- All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners.
- Juniper Networks በዚህ ሰነድ ውስጥ ለተፈጠሩት ስህተቶች ምንም ሃላፊነት አይወስድም። Juniper Networks ያለማሳወቂያ ይህንን ህትመት የመቀየር፣ የመቀየር፣ የማስተላለፍ ወይም የመከለስ መብቱ የተጠበቀ ነው።
- የቅጂ መብት © 2025 Juniper Networks, Inc. መብቱ በህግ የተጠበቀ ነው።
በተደጋጋሚ የሚጠየቁ ጥያቄዎች
- ጥ: በመጫን ጊዜ ችግሮች ካጋጠሙኝ ምን ማድረግ አለብኝ?
- A: Refer to the Open Issues section in the user manual for troubleshooting tips or contact technical support for assistance.
- ጥ: ሌሎች መተግበሪያዎችን እንደ APM በተመሳሳይ የኩበርኔትስ ክላስተር ማሄድ እችላለሁ?
- A: Yes, you can run other applications on the cluster, but ensure to use a 16-core node as per the specifications.
ሰነዶች / መርጃዎች
![]() |
Juniper NETWORKS 3.4.0 የጥድ አድራሻ ገንዳ አስተዳዳሪ [pdf] የተጠቃሚ መመሪያ APM-3-4-0፣ 3.4.0 የጁኒፐር አድራሻ ገንዳ አስተዳዳሪ፣ 3.4.0፣ የጥድ አድራሻ ገንዳ አስተዳዳሪ፣ የአድራሻ ገንዳ አስተዳዳሪ፣ ገንዳ አስተዳዳሪ፣ ስራ አስኪያጅ |