X3PRO Projector
“
Specifications
- Projection Technology: X3 Pro LCD Display
- Lamp Type: LED Lamp
- Wireless Connectivity: 2.4GHz & 5GHz IEEE 802.11
a/b/g/n/ac - LAN: Type-C
- Ports: LAN IN*1, USB-C port, 3.5mm audio port
Product Usage Instructions
Projector Introduction
The projector features various ports and components:
- IR Remote Sensor
- Projection Lens
- Dust Filter
- LAN Port
- 3.5mm Audio Port
- USB Port
- HD Port
- Type C Port
- AC Port
- Vent
Basic Operations:
- Power On the projector.
- Select the Signal Source.
- Use the navigation keys on the remote for navigation and menu
options. - Adjust focus using the Electric Focus feature.
Remote Control Functions:
- Power ON/OFF
- Navigation keys
- Return Home
- Volume Control
- Focus Adjustment
- Input Source selection
- Menu access
Electric Focus
To adjust the clarity of the picture, press the focus +/- keys
on the remote control.
Maintenance Suggestion
To ensure longevity of the projector:
- Clean the filter regularly to prevent clogging.
- Avoid continuous usage for more than 6 hours.
- Properly shut down the projector after each use.
Using the Device
Network & Internet Connectivity:
This projector can connect to the Internet through Wi-Fi:
- Select ‘Setting’ on the home page to access Network &
Internet settings. - Turn on Wi-Fi and select your network name from the list.
- Follow on-screen prompts to complete the connection
process.
Bluetooth Connection:
To connect a speaker to the projector via Bluetooth:
- Turn on Bluetooth on both the projector and the speaker.
- Select ‘Setting’ on the home page to access Bluetooth
settings. - Search for available devices and pair with your audio
system. - Complete the pairing process following on-screen
instructions.
Frequently Asked Questions (FAQ)
Why is there no display when I connect HD port?
- Check if the interface is securely connected.
- Ensure compatibility between devices.
- Clean the lens if dirty.
- Adjust the projection lens focus.
- Align the projector and screen properly.
- Avoid excessive brightness in the environment.
- If issues persist, reboot the projector and try again after a
few minutes.
Common Issues:
- Ensure power cord is properly connected.
- Avoid covering IR receiver for remote control
functionality. - Infrared mode operation requires direct pointing of remote at
IR receiver. - Maintain clear line of sight between remote and projector.
- If remote control is unresponsive, check battery status and
correct installation.
“`
70X100mm 105g
Safety Tips
1
Safety Tips
2
Specif ications
Projection Technology Lamp Type
X3 Pro LCD Display LED Lamp 2.4GHz&5GHz; IEEE 802.11 a/b/g/n/ac
LAN Type-C
3.5mm audio port LAN IN*1 USB-C port
3
3
Projector Introduction
1
2
4 56 7 8 9
10 3
576
3 11
1.IR Remote Sensor 2.Projection Lens 3.Dust Filter 4.LAN Port 5.IR Remote Sensor 6.3.5mm Audio Port 7.USB Port 8.HD Port 9.Type C Port 10.AC Port 11.Vent
1
9
10
12
2
8
4
1.Power On 2.Signal Source 3.Ok(Enter) 4.Down 5.Left 6.Right
11
7.Up 8.Menu 9.Return 10.Projector Foot Pad 11.Projector Mounting Hole 12.Dust Removal Hole 4
Remote Control Introduction
Power ON/OFF Navigation key
Return Home VOL FocusVoice Key
Input Source
Menu Mouse Mode Setting VOL + Focus+ Mute
5
Electric Focus
Press the focus +/- keys to adjust the clarity of the picture.
6
Q&A
* Check if the power cord is connected properly, and if the power light is on.Try to unplug and plug the power if the projector still can not boot up.
* Do not cover lR receiver. * ln the infrared mode, make sure remote points at lR receiver directly. * There is an obstacle between the remote control and the projector. * The batteries are out of power or the battery is not installed correctly.
Why is there no display when I connect HD port?
* Check if the interface is securely connected. * The devices may be incompatible.
* The lens is not clean. * The projection lens is not correctly focused. * The projector and the screen are not aligned properly. * The environment is too bright.
* Please reboot the projector to test again. If the screen still freeze, please turn off for 10 minutes and turn on again.
7
Maintenance Suggestion
Open filter from here
To make this projector work longer, we recommend you to follow the suggestions. 1.Before cleaning the projector, turn off the projector, then turn off the main power and unplug it from the outlet. 2.Clean the filter regularly every month to prevent clogging. 3. Make sure to close the projector off once you finished using it. 4.Make sure not to use it continuously for more than 6 hours.
8
Using the device
1 Network & Internet
This projector can connect to the Intemet through Wi-Fi. * On the home page, select ” Setting ” to go to the “Network & Internet”,
make sure that Wi-Fi is turned on. * Select your Wi-Fi network name when it appears in the list. * Complete the connection process by following on-screen prompts.
2 Bluetooth
How do l connect a speaker to my projector? * Turn on the Bluetooth feature on your projector and the speaker. * On the home page, select “”Setting” to go to the “Bluetooth”, make sure
that Bluetooth is turned on. * Search for available devices on your projector’s setting menu and select
your audio system when it appears in the list. * Complete the pairing process by following on-screen prompts.
9
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
TFIRETEK X3PRO Projector [pdf] User Manual 2A54Y-X3PRO, 2A54YX3PRO, x3pro, X3PRO Projector, X3PRO, Projector |