TFIRETEK LogoUSER MANUAL
For more details, please consult online customer service.

TFIRETEK HM103 A Projector

warning 2 Notice
Floos 10 s usor manul oty bors o

Safety Tips

For the best viewing sffect, please use the projector in dark room.

  1. Do ot nstal his projector i the erea which directly blown by the o condifioner, to provent projector faled caused by Water vapor condensation or excessive temperature.
  2. Ensure that the environmant is ventlated to prevent overheat caused by hes bulld-up.
  3. Pravent foreign objects from falng nto the machine. Never nsart any metalobjects nto the machin. I foregn objects fal nto the mechine accidentally,
  4. Do not please powe o professional ot place any iquid on the machine to avoid leskage.
  5. Avold volent vibrations when transporting. Plsase protect the lens. rom vear,
  6. D0 ot touoh the vents when using the projector to avold burs due 10 sxcessive temperature.
  7. Do not look directly at tha lens while the projector is rumning to provent eyeiy
  8. Plesse clean the fiter reguiary fo prevent malfunction caused by clogang

Notice warning 2
Do ot apen the case of projector o prevent eleciic shock. Please ek professional assistance for maintenance mtters.
Warn warning 2
Do not touch! The inside of the projector contalns uninsuated voltage:
Warn warning 2
Do ot nstal the projectar around flammable objecets to prevent fire.

TFIRETEK HM103 A Projector - tips

To ensure the performance and stabiliy of the projector, piease place it horizontally and leave a space of about 30cm between the projector and the wall

TFIRETEK HM103 A Projector - tips 1

Do not install in places with poor ventilation.

TFIRETEK HM103 A Projector - tips 2Do not block the vents.

TFIRETEK HM103 A Projector - tips 3

Do not install n high temperature or humid places.

TFIRETEK HM103 A Projector - tips 4Do not install i dust or smoky places.

Specifications

Item Specification
Product HM103-A
Native Resolution 1920X1080
Projection Technology LCD Display
Lamp Type LED Lamp
Interface HD HD IN*1
USB USB 2.0*1
Earphone 3.5mm audio port
Environment
Power Input AC 110-240V 50-60HZ
Operating Temperature 0 – 30°C
Storage Temperature -20 – 65°C
Operating Humidity 0 – 90% Non-condensing

Package Contents

TFIRETEK HM103 A Projector - Package

Projector Infroduction

TFIRETEK HM103 A Projector - Package 1

  1. Projection Lens
  2. IR Remote Sensor
  3. Dust Removal Hole
  4. Vent
  5. 3.5mm Audio Port
  6. HD Port
  7. USB Port
  8. Power On
  9. AC Port
  10. Vent
  11. Bracket

Using the device

  1. Network & Internet
    This projector can connect to the Internet through Wi-Fi.
    * On the home page, select “ Setting ” to go to the “Network & Internet”, make sure that Wi-Fi is turned on.
    * Select your Wi-Fi network name when it appears in the list.
    * Complete the connection process by following on-screen prompts.
  2. Bluetooth
    How do connect a speaker to my projector?
    * Turn on the Bluetooth feature on your projector and the speaker.
    * On the home page, select “Setting” to go to the “Bluetooth”, make sure that Bluetooth is turned on.
    * Search for available devices on your projector’s setting menu and select your audio system when it appears in the list.
    * Complete the pairing process by following on-screen prompts.

Q&A

Unable to Boot Up

* Check if the power cord is connected properly, and if the power light is on.Try to unplug and plug the power if the projector still can not boot up.

Remote Controller is Insensitive or Unresponsive

* Do not cover IR receiver. * In the infrared mode, make sure remote points at IR receiver directly. * There is an obstacle between the remote control and the projector. * The batteries are out of power or the battery is not installed correctly * Pair the Bluetooth remote control and make sure is working within 5 meters.

Why is there no display when | connect HD port?

*Check if the interface is securely connected. *The devices may be incompatible.

Blurry Display

* The lens is not clean. * The projection lens is not correctly focused. * The environment is too bright.

Screen Freeze

* Please reboot the projector to test again. If the screen still freeze, please turn off for 10 minutes and turn on again. If you have any questions or suggestions, please contact our online customer service.

Maintenance Suggestion

TFIRETEK HM103 A Projector - Package 2

warning 2 Notice
To make this projector work longer, we recommend you to follow the suggestions.

  1. Before cleaning the projector, turn cff the projector, then turn off the main power and unplug it from the outlet.
  2. Clean the filter regularly every month to prevent clogging.
  3. Make sure to close the projector off once you finished using it.
  4. Make sure not to use it continuously for more than 6 hours.

Warranty Card

Client Name: — Client ID:
Client Phone Number: —
Purchase shop: —————
Return Address: ——
Fault description:
(For quick repair, please describe the problem in details.)

TFIRETEK HM103 A Projector - Icon

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

TFIRETEK Logo

Documents / Resources

TFIRETEK HM103-A Projector [pdf] User Manual
2A54Y-HM103A, 2A54YHM103A, hm103a, HM103-A Projector, HM103-A, Projector

References

Leave a comment

Your email address will not be published. Required fields are marked *