G230 Wireless
HDMI Extender
Quick Start Guide
Product & Accessories
How to install 1 Transmitter (TX) to 1 Receiver (RX)
Step 1: Power on the TX & RX by connecting to the power adapter
Step 2: Connect the video source to TX HDMI In
Step 3: Connect RX HDMI out to TV/Monitor/Protector
How to install 1 TX to 4 RX
Step 1: Power on the -IX & all RX by connecting to the power adapter
Step 2: Connect the video source to DC HDMI In, and connect HDMI out to TV/Monitor.
Step 3: Connect all RXs HDMI out to TV/Monitor.
How to control video source with remote control from RX side
Step 1: Connect the IR receiver to the RX
Step 2: Connect the IR emitter to TX
Step 3: Point the remote control to the IR receiver to back control the video source
How to control video source with a (wireless) mouse/keyboard from RX side
Step 1: Connect PC to TX with USB & HDMI cables
Step 2: Connect RX USB jack with mouse/keyboard or USB nano receiver for wireless mouse/keyboard
Step 3: Use the mouse/keyboard to control the PC connected to the Transmitter
LED Indicators
How to pair extra RX
Step 1: Plug In the power adapters of both TX & RX
Step 2: Use HDMI cable to connect HDMI IN on TX & HDMI OUT on RX
Step 3: When the blinking green light turns to be static, it means pairing successfully.
Key Features
- Long-distance HDMI video and audio signal transmitting wirelessly, up to 200m
- Supporting one-to-many multicast, up to 4 receivers simutaneoulsy
- Supporting Remote control & USB KVM back control
- Compatible with HDMI 1.4, 1.3, and HDCP 1.4
- Plug & Play, Hassle-free, No App or driver installation needed
Technical Specification
| Video | Supported protocol Maximum resolution Ports |
HDMI 1.4 (HDCP 1.4) 920X1080@60 Hz HDMI -A Ports |
| IR | Ports | 3.5mm |
| WIFI | Protocol Transmission distance |
802.11 b/g/n/ac Up to 200m (clear line of sight) |
| Other | Power Supply Max power consumption Temperature Humidity Size |
DC 12V/1A Max. 7W 0°C +45°C 10% 80% RH 90*92.33mm |
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated at a minimum distance of 20cm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Documents / Resources
 |
Tevii Technology G230 Wireless HDMI Extender [pdf] User Guide G230TX, 2ALU5G230TX, G230 Wireless HDMI Extender, G230, Wireless HDMI Extender |
