testboy D-49377 LED 2 Pole Voltage Tester
Functions
- Press the light intensity button once to switch on the device.
- Press the button twice for 50 % light intensity.
- Press button three times for 75% light intensity
- Press button four times for 100% light intensity.
- Press light source button to switch between the 4 light modes.
- Press the red flashing light button once for a red flashing light.
Product Description
Safety instructions
WARNING!
For safety reasons the unauthorized conversion and / or modification of the device is not permitted.
Risk of injury!
Improper handling of the lamp can cause injuries. Don’t expose the lamp to extreme heat, cold or direct sunlight. Keep the lamp away from radiators, stoves and other heat generating equipment. Do not open the lamp or insert any objects into the openings. Never immerse the lamp in water. – Do not try to replace the LEDs. The LEDs can not be replaced. If damaged, dispose of the lamp. Do not use the lamp near fire or flammable places or materials. Keep children younger than eight years away from the lamp.
Disposal
The lamp must be in accordance with the country specific Regulations at a suitable disposal point for the recycling of electrical and electronic equipment.
CUSTOMER SUPPORT
Test boy GmbH
Tel: +49 4441 89112-10
Electrotechnics Spezia Fabrik
Fax: +49 4441 84536
Beim Alton Floorplate 3
D-49377 Vechta
www.testboy.de
Germany
info@testboy.de
Documents / Resources
 |
testboy D-49377 LED 2 Pole Voltage Tester [pdf] Instructions D-49377 LED 2 Pole Voltage Tester, D-49377, LED 2 Pole Voltage Tester, Pole Voltage Tester, Voltage Tester, Tester |
