TIMEBAR Multipurpose Timecode Display
Product Information
Technical Specifications
- Version: 1.1.0
- Release Date: V 1.3 / 02.12.2024
- Country of Origin: Germany
- Power Source: Internal RTC, Battery
- Connectivity: Wireless, Cable (3.5mm jack)
- Brightness Levels: 1 to 31
- Auto Brightness: Available
Product Usage Instructions
1. Getting Started with Your Timebar
Thank you for choosing our product! To begin using your
Timebar:
- Power On: Short press the POWER button to wait
for wireless synchronization or long press to start generating
timecode. - Power Off: Long press the POWER button to turn
off the Timebar. - Mode Selection: Press POWER to enter mode
selection, then use button A or B to select the desired mode. - Brightness Adjustment: Press A & B
simultaneously to enter brightness selection and adjust as
needed.
2. Setup App
The Tentacle Setup App allows you to synchronize, monitor, and
operate your Timebar device. Follow these steps to start using the
app:
- Download: Download the Setup App from the
provided link. - Device List: Add your Timebar device to the
app for monitoring and setup. - Device Warnings: Check for any warnings or
notifications related to your device.
3. Timecode Synchronization
Ensure accurate timecode synchronization for your projects:
- Wireless Sync: Use the Setup App for wireless
synchronization. - Cable Sync: Connect an external timecode
source via the 3.5mm jack for synchronization. - As Timecode Generator: Utilize the internal
RTC to generate and output timecode.
4. Charging & Battery
Maintain your Timebar’s battery life and perform firmware
updates:
- Battery Status: Monitor the battery status and
charge via the USB-C port. - Firmware Update: Keep your device up-to-date
by performing firmware updates as needed.
5. Technical Specifications
Refer to the technical specifications for detailed information
on your Timebar device.
Frequently Asked Questions (FAQ)
Q: How long does the Timebar maintain synchronization once
set?
A: The Timebar maintains synchronization for more than 24 hours
independently once set.
Q: Can I adjust the brightness levels of the Timebar
display?
A: Yes, you can adjust the brightness levels from 1 to 31 on the
Timebar display.
rmw r Fi
ae
Version
1.1.0
V 1.3 / 02.12.2024
1 GET STARTED WITH YOUR TIMEBAR
1.1 OVERVIEW 1.2 POWER ON 1.3 POWER OFF 1.4 MODE SELECTION 1.5 BRIGHTNESS
2 SETUP APP
2.1 DEVICE LIST 2.2 ADD A NEW TENTACLE TO DEVICE LIST 2.3 BOTTOM SHEET 2.4 DEVICE WARNINGS
3 DEVICE VIEW (SETUP APP)
3.1 TIMECODE MODE 3.2 TIMER MODE 3.3 STOPWATCH MODE 3.4 MESSAGE MODE 3.5 SLATE MODE 3.6 TIMEBAR SETTINGS
4 TIMECODE SYNCHRONIZATION
4.1 WIRELESS SYNC 4.2 RECEIVING TIMECODE VIA CABLE 4.3 AS TIMECODE GENERATOR
5 CHARGING & BATTERY
6 FIRMWARE UPDATE
7 TECHNICAL SPECIFICATIONS
3
6 9
16 18 19 20
1 GET STARTED WITH YOUR TIMEBAR
Thank you for your trust in our products! We wish you lots of fun and success with your projects and hope your new tentacle device will always accompany you and stand by your side. Crafted with precision and care, our devices are meticulously assembled and tested at our workshop in Germany. We are delighted that you handle them with the same level of care. Yet, should any unforeseen issues arise, rest assured that our support team will go above and
fi beyond to nd a solution for you.
1.1 OVERVIEW
The TIMEBAR is more than just a timecode display. It is a versatile timecode generator with many additional functions. It can generate timecode from its internal real-time clock or synchronize with any external timecode source. Synchronization can be done by cable or wirelessly via Tentacle Setup App. Once synchronized, the TIMEBAR maintains its synchronization for more than 24 hours independently.
Bluetooth® Signal Strength
Frame Rate Flashing on First Frame
Button A
Battery Status
Light Sensor for Auto Brightness
Button B
1 GET STARTED WITH YOUR TIMEBAR
3/22
1.2 POWER ON
Short press POWER: Your TIMEBAR doesn’t generate any timecode but is waiting to be synchronized wirelessly by the Setup App or via cable from an external timecode source through the 3,5 mm jack.
Long press POWER: Your TIMEBAR generates timecode fetched from the internal RTC (Real Time Clock) and outputting it through the 3.5 mm mini jack.
Flashing empty timecode
TIMECODE Time of day (RTC)
1.3 POWER OFF
Long press POWER:
ff Your TIMEBAR turns o . The timecode will be
lost.
SHUTDOWN Flashing 4 times
1 GET STARTED WITH YOUR TIMEBAR
4/22
1.4 MODE SELECTION
Press POWER to enter mode selection. Then press button A or B to select mode.
Timecode A: Show User Bits for 5 Seconds B: Hold Timecode for 5 Seconds Timer A: Select one of 3 Timer Presets B: Start/Stop Stopwatch A: Reset Stopwatch B: Start/Stop Message A: Select one of 3 Message Presets B: Start/Stop Slate A: N/A B: N/A
Button A Button B
USB-C Port Charging & Firmware Update
POWER Button On/Off/Mode
3.5mm Jack Timecode In/Out
1.5 BRIGHTNESS
Press A & B at once: Enter Brightness selection Then press A or B: Select Brightness Level from 1 to 31, A = Auto Brightness
Press A & B twice: Boost Brightness for 30 seconds
Press at once to enter brightness selection
1 GET STARTED WITH YOUR TIMEBAR
5/22
2 SETUP APP
The nt l Te ac e Setup App allows you to synchronize, monitor, operate n a d setup your nt l Te ac e v s. de ice You n ca download the Setup App r : he e
Start working with the Setup App
or Bef e starting the app it is recommended to switch on your TIMEBAR first. During operation, it constantly transmits t m o i ec de n a d status information via Bluetooth. n Si ce the Setup App will need to communicate with your TIMEBAR via Bluetooth, you should make sure Bluetooth is t v t ac i a ed on your mobile v . de ice You must grant the necessary app permissions as well.
2.1 DEVICE LIST
The v de ice list is v di ided into 3 parts. The toolbar at the top contains general status information n a d the app settings button. In the m l idd e you see a list of all your v s de ice n a d t r hei respective information. At the bottom you find the Bottom t Shee which n ca be pulled up.
Please note: Tentacles n ca be linked to up to 10 mobile v s de ice at the same time. If you link it to the
11th v , de ice the first (or oldest) one will be dropped n a d s ha no longer ss acce to this Tentacle. In this s ca e you will need to add it n. agai
2 SETUP APP
6/22
2.2 ADD A NEW TENTACLE TO DEVICE LIST
fi When you open the Tentacle Setup App for the rst time, the device list will be empty.
1. + v Tap on Add De ice 2. A list of available Tentacle devices nearby will be shown 3. Select one and hold you mobile device close to it 4. The Bluetooth icon will be visible on the upper left side of the TIMEBAR display 5. ! SUCCESS will appear when the TIMEBAR is added
Please note:
If a nt l Te ac e is out of Bluetooth r n a ge for for more than 1 minute, the message will be
. ow v r, t s o s not m n t t t v s no lon r Last seen x minutes ago H
e e hi d e
ea
ha he de ice i
ge
synchronized, but only that no status updates ra e r v . ecei ed As soon as the nt l Te ac e
comes k bac into range, the current status information will appear n. agai
Remove Tentacle from Device List
fi You can remove a Tentacle from the list by swiping to the left and con rm the removal.
2.3 BOTTOM SHEET
The bottom sheet is visible at the bottom of the device list.
It contains various buttons to apply actions to multiple Tentacle devices. For the TIMEBAR only the SYNC button is
relevant.
Wi e e For more information about wireless sync, see
r l ss
Sync
2 SETUP APP
7/22
2.4 DEVICE WARNINGS
In case a warning sign appears, you can tap directly on the icon and a short explanation is displayed.
Inconsistent frame rate: This indicates two or more Tentacles generating timecode with mismatching frame rates.
Not in sync: This warning message is displayed, when inaccuracies of more than half a frame occur between all synchronized devices. Sometimes this warning can pop up for a few seconds, when starting the app from background. In most cases the app just needs some time to update each Tentacle. However, if the warning message persists for more than 10 seconds you should consider re-syncing your Tentacles
Low battery: This warning message is displayed, when the battery level is below 7%.
2 SETUP APP
8/22
3 DEVICE VIEW (SETUP APP)
In the Setup App’s device list, tap on your TIMEBAR to establish an active Bluetooth connection to the device and access its device view. An active Bluetooth connection is indicated by an animated antenna icon on the upper left side of the TIMEBAR display.
Bluetooth connection
fi At the top, you will nd the basic device
information such as TC status, FPS, output volume, and battery status. Below that, there is the virtual TIMEBAR display, showing what is also visible on the actual TIMEBAR. Additionally, the timebar can be remotely operated with buttons A and B.
3.1 TIMECODE MODE
In this mode, the TIMEBAR displays the timecode of all connected devices as well as the timecode running status.
TIMEBAR will display user bits for 5 seconds
TIMEBAR will hold timecode for 5 seconds
3 DEVICE VIEW (SETUP APP)
9/22
ustom m o C
Ti ec de
You n ca set a custom t m o i ec de or set your nt l Te ac e v de ice to phone time.
p Ta on “Set m o ” Ti ec de n a d a lo dia g window will pop up
Custom timecode: t edi the preset t m o i ec de n a d confirm by tapping on t Se m o Ti ec de
t Se to on Ph e m : Ti e tap on t Se to on Ph e m Ti e n a d the app will t fe ch the m Ti e of y Da from your mobile v de ice n a d set the internal RTC ( l Rea m Ti e Clock) to that time
Please note:
The timecode display of the device setup menu is for informational purposes only. It is not guaranteed to be 100% frame accurate with the timecode
r m t F a e Ra e
p Ta on “Frame t ” Ra e n a d select one from the dropdown menu. nt l Te ac e generates the following SMPTE t n r S a da d r m f a e rates: 23,98, 24, 25, 29,97, 29,97 DropFrame n a d 30 fps.
For r m f a e rates r highe than 30 fps, please select a r m f a e rate that is a factor of it e.g. shooting 60 fps > set t m o i ec de to 30 fps
3 DEVICE VIEW (SETUP APP)
10/22
User Bits
Currently Active User Bits Custom User Bits RTC Date
User bits enable you to embed additional information into the timecode signal such as the calendar date or a camera ID. These bits usually consist of eight hexadecimal digits, which are able to handle values from 0-9 and a-f.
The currently running SMPTE timecode user bits are displayed here.
Enable by using the toggle switch on the right. Edit by tapping on it and pressing x. Characters available: a-f; 0-9
The user bits are set to the Real Time Clock. Choose from 6
ff di erent date formats for the Real Time Clock.
Output Volume
LINE MIC
Once your TIMEBAR is synchronized, it is outputting a LTC timecode signal through the 3.5 mm jack. If you connect your TIMEBAR to send timecode to a recording device or studio environment, you have to select the output volume of your timecode signal according to the needs of the recording device.
Professional cameras with a dedicated TC-IN connector demand timecode with LINE-level. Usually a LEMO or BNC connector is used for Line level signals.
Tentacle can also be used with cameras and recorders without a dedicated TC-IN connector. In such case you need to record the timecode signal as an audio signal on an audio track of that device. Some devices only accept microphone-level audio, so you have to adjust the output level through the setup app in order to prevent distortion of the timecode signal. Usually a mini jack or XLR input is used for Mic level signals.
3 DEVICE VIEW (SETUP APP)
11/22
Sync to this v de ice
If you want to sync some or all of your Tentacle devices from your synchronized TIMEBAR in the device list.
Sync All: all Tentacles of the device list will be synchronized to this TIMEBAR
Only Devices not in Sync: all Tentacles that are not in sync will be synchronized to this TIMEBAR
3 DEVICE VIEW (SETUP APP)
12/22
3.2 TIMER MODE
TIMEBAR displays one of three timer presets. Select one by enabling the toggle switch on the left. Edit by pressing x and entering a custom value
Select one of the presets or reset the timer
Start & stop timer
3.3 STOPWATCH MODE
TIMEBAR displays running stopwatch. Reset stopwatch to 0:00:00:0
Start & stop stopwatch
3.4 MESSAGE MODE
TIMEBAR displays one of three message presets. Select one by enabling the toggle switch on the left. Edit by pressing x and entering a custom text with up to 250 Characters available: A-Z, 0-9, -( ) ?, ! # Adjust text scroll speed with slider below.
Select one of the text presets
Start & stop text
3.5 SLATE MODE
This mode is designed for use when your Timebar is mounted into an optionally available slate. While the slate sticks are open, the Timebar displays running timecode. When the sticks are closed, the Timebar runs the following sequence:
1. Timecode (frozen at the moment the sticks close) 2. User Bits 3 fi . Prede ned Text (up to 8 characters)
You can adjust the display duration for each parameter in the mode settings.
3 DEVICE VIEW (SETUP APP)
13/22
The buttons are not functional in this mode.
Assembly
t s o um nt For detailed assembly instructions, please refer to hi d c
e.
Calibration
To calibrate the magnet sensor sensitivity, connect to your Timebar using the Tentacle Setup App. Enter Slate Mode and press Calibration to start the process. This takes only a few seconds and needs to be performed just once.
3.6 TIMEBAR SETTINGS
fi Here you nd all settings of your TIMEBAR, which are mode
independent.
Icon Name
You can change the device icon by tapping on it. Choosing
ff di erent icons for your Tentacles will make it easier to identify
them in the device list.
ff For a better di erentiation of multiple Tentacle devices, the
name of each can be changed individually. Tap on the Device
fi fi Name eld, edit the name and con rm with Return.
Auto Brightness
Enable auto brightness of display with toggle switch, so that the TIMEBAR adjusts to surroundings automatically with the brightness sensor beneath the Tentacle logo.
Brightness Level
Adjust brightness level with slider (1-31)
3 DEVICE VIEW (SETUP APP)
14/22
Brightness Boost
Tap on Brightness Boost to start a 30 seconds boost for
ffi di cult lighting conditions.
Orientation
Default Upside Down Auto
ff Auto Power O
Your Timebar has a built-in position sensor. So the display orientation can change depending on the current Timebar position.
Display is straight up
Display is upside down
Display is always straight up, even when TIMEBAR is upside down
If no cable is plugged into Tentacle’s mini jack port, it switches
ffo automatically after the set time period (2/4/8/12 hrs). This
prevents an empty battery the next time it is used, in case you
ff forgot to switch it o after a shooting day.
MIDI Timecode
If switched on, your TIMEBAR will be recognized as MIDI device via USB and output MIDI timecode (MTC).
General Information
fi Shows general information like the rmware version, serial
number and current RTC time of your device.
3 DEVICE VIEW (SETUP APP)
15/22
4 TIMECODE SYNCHRONIZATION
4.1 WIRELESS SYNC
1. Open the Setup App and tap on
in the bottom sheet. A dialog will pop up
2. Select the desired frame rate from the drop down menu 3. It will start with Time of Day, if no custom starting time is set 4. Press START and all Tentacles in the device list will synchronize one after another within
a few seconds
Please note: During wireless sync, the internal clock ( ) RTC of the m r Ti eba is also set. The RTC is used as a r r n efe e ce time, for example, when the v de ice is turned on n. agai
4.2 RECEIVING TIMECODE VIA CABLE
If you have an external timecode source you like to feed to your TIMEBAR, proceed as follows
1. Short press POWER and start your TIMEBAR waiting
to be synchronized
2. Connect your TIMEBAR the external timecode source
with a suitable adapter cable to the mini jack of your TIMEBAR
3. Your TIMEBAR will read the external timecode and
synchronize to it
Please note: We recommend to feed every recording v de ice with the t m o i ec de from a nt l Te ac e to ensure r m f a e ur y acc ac for the entire shoot.
4 TIMECODE SYNCHRONIZATION
16/22
4.3 AS TIMECODE GENERATOR
TIMEBAR can be used as a timecode generator or timecode source with nearly any recording device such as cameras, audio recorders and monitors as well.
1. Long Press POWER, your TIMEBAR generates
Timecode or open the Setup App and perform a wireless sync
2. Set the correct output volume 3. Set the recording device so it can receive timecode 4. Connect your TIMEBAR to the recording device with a
suitable adapter cable to the mini jack of your TIMEBAR
Please note:
While sending timecode to another device, your TIMEBAR can still display all other modes at the same time
4 TIMECODE SYNCHRONIZATION
17/22
5 CHARGING & BATTERY
our s u lt- n, r r l Y
TIMEBAR ha a b i i
echa geab e
lithium-polymer battery.
u lt- n tt ry n r pl t The b i i ba e ca be e aced if he
performance is r s n dec ea i g over the years.
r The e will be a battery replacement kit for
v l l n t utur . TIMEBAR a ai ab e i he f
e
Connect USB-C to show charging status
p r t n m O e a i g Ti e
Typical runtime of 24 hours
6 hours ( st highe brightness) to 80 hours (lowest brightness)
r n Cha gi g
Via USB-port on the r t igh side from any USB power source
r n m Cha gi g Ti e
t n r S a da d r : Cha ge 4-5 hours Fast r cha ge 2 hours (with suitable fast r r) cha ge
r n t tus Cha gi g S a
Battery icon on the lower left side of TIMEBAR display, w l hi e in mode selection or during r n cha gi g
Battery icon in the Setup App
tt ry rn n Ba e Wa i g
l s n F a hi g battery icon n t s i dica e that battery is nearly empty
5 CHARGING & BATTERY
18/22
6 FIRMWARE UPDATE
or Bef e you start:
ffi k Ma e sure your TIMEBAR s ha su nt cie battery. If your updating computer is a laptop, ffi make sure it s ha su nt cie battery or is connected to power source. The nt l Te ac e Sync
Studio software (macOS) or the nt l Te ac e Setup software (macOS/Windows) should not be running at the same time as the Firmware p t U da e App.
1 fi . Download the rmware update app, install it and open it
DOWNLOAD CURRENT FIRMWARE
2. Connect your TIMEBAR via USB cable to the computer and switch it on 3. Wait for the update app to connect to your TIMEBAR. If an update is needed, start the
update by pressing the Start Firmware Update button
4. The updater app will tell you when your TIMEBAR was successfully updated 5. To update more TIMEBARs you have to close and start the app again
6 FIRMWARE UPDATE
19/22
7 TECHNICAL SPECIFICATIONS
Connectivity
3.5 mm k: Jac USB Connection: p r t n o s: USB O e a i g M de
m o Ti ec de In/Out
– USB C (USB 2.0)
r n , m o ( ), firmw r up t Cha gi g MIDI Ti ec de MTC
ae
da e
Control & Sync
Bluetooth®: Remote Control: Synchronization: m Ja Sync: m o Ti ec de In/Out: Drift:
r m F a e Rates:
Power
Power Source: Battery capacity: Battery operation time: Battery r n cha gi g time:
Hardware
Mounting:
t: Weigh Dimensions:
5.2 Low Energy nt l Te ac e Setup App (iOS/Android) Via Bluetooth® (Tentacle Setup App) l Via cab e LTC via 3.5 mm k Jac High precision TCXO / ur y Acc ac less than 1 r m f a e r t d if in 24 hours (-30°C to +85°C) SMPTE 12M / 23.98, 24, 25 (50), 29.97 (59.94), 29.97DF, 30
Built-in r r l echa geab e Lithium polymer battery 2200 mAh 6 hours ( st highe brightness) to 80 hours (lowest brightness) t n r S a da d r : Cha ge 4-5 hours, Fast r : Cha ge 2 hours
nt r t I eg a ed hook surface on the k bac for easy mounting, other mounting options v l l a ai ab e separately 222 g / 7.83 oz 211 x 54 x 19 mm / 8.3 x 2.13 x 0.75 n s i che
7 TECHNICAL SPECIFICATIONS
20/22
Intended use
The device is intended for use in professional video and audio productions. It may only be connected to suitable cameras and audio recorders. The supply and connection cables must not exceed a length of 3 meters. The device is not waterproof and should be protected against rain. For safety
fi and certi cation reasons (CE) you are not permitted to convert and / or modify the device. The device can be damaged if you use it for purposes fi other than those mentioned above. Moreover, improper use can cause hazards, such as short circuits, re, electric shock, etc. Read through the
manual carefully and keep it for later reference. Give the device to other people only together with the manual.
Safety notice
A guarantee that the device will function perfectly and operate safely can only be given if the generally standard safety precautions and device-
fi speci c safety notices on this sheet are observed. The rechargeable battery integrated in the device must never be charged in an ambient ° ° ° temperature below 0 C and above 40 C! Perfect functionality and safe operation can only be guaranteed for temperatures between 20 C and ° +60 C. The device is not a toy. Keep it away from children and animals. Protect the device from extreme temperatures, heavy jolts, moisture,
combustible gases, vapors and solvents. The safety of the user can be compromised by the device if, for example, damage to it is visible, it doesn’t
fi work anymore as speci ed, it was stored for a longer period of time in unsuitable conditions, or it becomes unusually hot during operation. When
in doubt, the device must principally be sent in to the manufacturer for repairs or maintenance.
Disposal / WEEE notification
This product must not be disposed of together with your other household waste. It is your responsibility to dispose of this device at a special disposal station (recycling yard), at a technical retail center or at the manufacturer.
FCC statement
This device contains FCC ID: SH6MDBT50Q This device has been tested and found to comply with part 15B and 15C 15.247 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
ff reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
ff Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
fi Modi cation to this product will void the user’s authority to operate this equipment. This device complies with part 15 of the FCC rules. Operation
is subject to the following two conditions. (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Industry Canada declaration
This device contains IC: 8017A-MDBT50Q This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This digital device complies with the Canadian regulatory standard CAN ICES-003.
Declaration of conformity
Tentacle Sync GmbH, Wilhelm-Mauser-Str. 55b, 50827 Cologne, Germany declares herewith that the following product: Tentacle SYNC E timecode generator complies with the provisions of the directives named as follows, including changes in them that apply at the time of the declaration. This is evident from the CE mark on the product.
ETSI EN 301 489-1 V2.2.3 EN 55035: 2017 / A11:2020 ETSI EN 301 489-17 V3.2.4 EN 62368-1
7 TECHNICAL SPECIFICATIONS
21/22
WARRANTY POLICY
The manufacturer nt l Te ac e Sync m G bH grants a warranty of 24 months on the v , de ice provided that the v de ice was purchased from an authorised dealer. The calculation of the warranty period ns begi on the t da e of the invoice. The territorial scope of protection under this warranty is worldwide.
The warranty refers to the s n ab e ce of ts defec in the v , de ice including functionality, material or production ts. defec The accessories enclosed with the v de ice ra e not covered by this warranty policy.
Should a t defec occur during the warranty period, nt l Te ac e Sync m G bH will provide one of the following services at its discretion under this warranty:
r r p r o t v or f ee e ai
f he de ice
rf ee replacement of the v de ice with an equivalent item
In the event of a warranty claim, please contact: nt l Te ac e Sync m , G bH Wilhelm-Mauser-Str. 55b, 50827 Cologne, Germany
*Claims under this warranty ra e x lu e c ded in the event of m da age to the v de ice us ca ed by
normal wear n a d tear improper n l n ha d i g (please observe the safety t da a sheet) failure to observe safety precautions repair attempts undertaken by the owner
the warranty also does not apply to second-hand v s de ice or demonstration v s. de ice
A prerequisite for l m n c ai i g warranty service is that nt l Te ac e Sync m G bH is allowed to examine the warranty s ca e (e.g. by sending in the v ). de ice r Ca e must be taken to vo a id m da age to the v de ice during transport by packing it securely. To l m c ai for warranty service, a copy of the invoice must be enclosed with the v de ice shipment so that nt l Te ac e Sync m G bH n ca k chec whether the warranty is still valid. Without a copy of the invoice, nt l Te ac e Sync m G bH may refuse to provide warranty service.
ff s Thi manufacturers warranty does not a t ec your statutory rights under the purchase agreement
entered into with nt l Te ac e Sync m G bH or the dealer. Any existing statutory warranty rights against the
ff respective seller shall remain una t ec ed by this warranty. The manufacturers warranty therefore does
not violate your l l ega rights, but extends your l l ega position.
s Thi warranty only covers the v de ice itself. So-called consequential m s da age ra e not covered by this warranty.
Documents / Resources
 |
Tentacle Sync TIMEBAR Multipurpose Timecode Display [pdf] User Manual V 1.3, 02.12.2024, TIMEBAR Multipurpose Timecode Display, TIMEBAR, Multipurpose Timecode Display, Timecode Display, Display |