Telran 07BIL Smart Lock User Manual

Telran 07BIL Smart Lock

Overview

This face, palm vein, radar-capable smart lock supports multiple unlocking methods including keypad passwords, RFID cards, fingerprints, face recognition (camera-based), and an emergency mechanical key. It also includes doorbell/video intercom and supports app-based remote door operations.

Specifications

Installation and Use

1. Install and test the lock with the door open to avoid being locked out.
2. Do not install the batteries before installing the lock.
3. Install Mortise and lock cylinder.
4. Install the waterproof rubber plate.
5. Install the front panel.
6. Install sliding screw casing.
7. Install the back panel.
8. Install the 4200 mAh lithium battery.
9. For initialization: open the battery cover, long-press the reset button, install the battery, and follow the system prompt until “Operation successful”.
10. Local unlocking: use the keypad (number pad), card, fingerprint, or face recognition; emergency unlock can use the mechanical key and the keyhole.
11. Remote unlock request: press “#” to request remote door opening; confirm visitor identity through the video intercom on the screen and open using the handle.

IMPORTANT NOTES

1. Install and test the lock with the door open to avoid being locked out.
2. Don’t install the batteries before installing the lock
3. Follow the instructions in sequential order.
4. Please use a lithium battery.
5. Please replace for the battery when the low-wattage alarm.
6. Read this manual carefully before installation, and keep it for future reference

Introduction

Product Overview

packing List

Introduction

Specifications

Installation

1. Step 1 Install Mortise and lock cylinder
2. Step 2 Install the waterproof rubber plate
3. Step 3 Install front Panel
4. Step 4 Install Sliding Screw Casing
5. Step 5: Install Back Panel
6. Step 6 Installation Battery

Local operation

Setting Guide

Number Pad

Initialization
Note : Please note all date will be erased if you reset your lock to factory default.All entered fingerprints, passwords, and other data will be cleared. Open the battery cover, long press the“Reset” button, install the battery ,and system prompts 6 key tones ,Voice prompt voice ”Initializing, please wait ”“” “Operation successful ”.

After initialization, the master password is restored to “ 123456” , a nd a ny fingerprint can be unlocked for customers to experience the lock function.

Note:

1. Delete by type cannot delete management user information; management user can only be deleted by code.
2. The volume setting only sets the volume of prompts and navigation during operation, and the maximum volume will be used by default during alarms, such as the anti-freezing alarm.
3. Dual-user authentication mode requires authentication of two ordinary users. The administrator is not affected by this and can directly unlock the lock. The dual-user authentication will not be effective in the initial state.
4. The lock can be opened using the default code 123456 followed by # in trial mode
5. When the voltage is lower than 6.8V, the lock will automatically alarm every time. After the alarm, the lock can be unlocked for 200 times. After the number of times, the delay time of each lock opening will be 2 seconds.

App operation

Download
You can search for [ Sma rt life] in various app stores or scan the QR code above to download

 Register

1. Click “ Sign Up” a nd read the Privacy Policy after it pops up. Click “ Agree” a nd enter the registration.
2. You can use email or mobile number as your account to register. The country/ region of the APP will be the same a s the phone’s. You can also change it by yourself when registering.(You cannot change the country/ region a fter the registration). Enter mobile number/ email a nd click” Get Verifica tion Code” .
3. Enter the verification code a nd turn to the password setting Set your password as required a nd click “ Done” .

Log in
If you already have an account, choose “Register with Existing Account” and enter the login

1. The system will automatically locate the current country/ region you are in. Or you can choose the country/ region by yourself.
2. Enter mobile number/ email and password.
   • Third-party Social Account Log in If you have downloaded WeChat or QQ on your phone, you can click the Wechat/QQ icon in the log in You can log in using your wechat/QQ account after authorizing it.If you are using an iPhone,you can also log in with an Apple ID.

Add Lock
Attention : You should be add admin first

1. Press ” 8+#” on the lock, after verifying the administrator, the number “5” starts lighting and the lock will enter the distribution network mode. Please follow the steps below to add a lock in the APP.(Note: please connect to 2.4 G Wi-Fi, not 5 GHz Wi-Fi)
2. Enable Bluetooth on your phone.
3. Click ” +” in the upper right corner of the home page, then click “Add Device”to go to the Add Device page. Currently, you can manually add devices or search for devices to add to the app. Or click” Camera&Lock “, and then click “Lock(Wi-Fi) “, enter the the WiFi connection interface.
4. Enter the Wi-Fi password and connect the door lock (It can only connect to 2.4G WiFi). “Connection succeed
5. Adding success: the voice prompt
6. Adding Failure: the timeout voice prompt “Network Connection failed”

Remote unlock
Press”# “on the lock to request remote door opening

1. The screen will wake up, confirm the visitor’s identity through video, and press down the handle to open the door.
2. Your phone APP also receive a door opening request , click enter the video intercom interface.Here, you can intercom with visitors, mute, meta, take photos and videos of the situation outside the door, The photos and videos taken will be saved to the local album on your mobile phone. 3.you can also click to open the door.

User Management

1. Click “Users” , to enter the user management interface.
2. Click on the added user; you can edit the corresponding user information of a user.

Temporary Password Unlock
There is limited time, single time ,dyna mic and empty password for offline type passwords. please use those passwords before it expires.

Alarm
Automatically report after an alarm occurs. The report types include: alarm and Doorbell alarm. Alarm , Hijack

Operation logs
You can view the alarm message and the record of opening the door the operation records, and possible reasons.Cannot see

1. The lock is not connected to the internet, so the records of pass code card, fingerprint, and other door opening methods cannot be uploadedin real -time.
2. Only a certain period of records can be retained.lf you need to keep the historical records, you can export the them.

Troubleshooting

• After installation, the touch-sensing keyboard has no response: (From the troubleshooting section) check battery installation polarity (positive/negative electrodes installed upside down can cause issues), battery power level, and whether wiring is connected after removing the back panel. If needed, remove the lock and re-wire if lock body wires are squeezed.
• Unable to register fingerprint: Ensure your fingers are not dirty or worn; clean the fingerprint head on the lock (dirt/oil stains). Also check that the fingerprint sensor responds when pressed.
• Fast power consumption: Check for possible standby power consumption or short circuit; the troubleshooting text also mentions checking a clutch triangle direction error and correcting it.
• Handle press on outside door no response, but unlocking works normally inside and verification is normal; motor is normal: Refer to the “no response to pressing the handle” troubleshooting list provided in the FAQ (the manual indicates checks under that scenario).
• Keyboard locks after wrong password attempts: Entering the wrong password more than 5 times in a row locks the keyboard for 90 seconds.
• Low voltage behavior: When voltage is lower than 6.8V, the lock automatically alarms every time; after the alarm, it can be unlocked 200 times, and afterward the delay time of each lock opening becomes 2 seconds.

19 Hayezira St. Industrial Zone Ramla 7255616

• www.telran.co.il
• office@telran.co.il