Telran 320163 Electric Threading Wire Machine
Product Data
- Product size 32x15x12cm
- Packaging size 37x20x13cm
- Weight 1.7kg
- Material Steel
Accessories
- 1 pc Hex Nut Socket Sleeve Magnetic
- 1 pc bend pipe
Technical Data
- Pulling force 16kg
- Usage Scope
- Can pass through pipes with six 90° bends.
- Applicable scope
- Ideal for indoor home renovation
- Applicable fish tape length No limit
- Applicable fish tape diameter 4-6mm
- Certificate RoHS
NOTE: The data are all measured manually and have certain errors
Instructions
- Insert the Hex Nut Socket Sleeve Magnetic into the hole of the electric drill and tighten it.
- Insert the fish tape from the handle.
- Insert the bend pipe into the outlet of the machine (this step can be omitted).
- Eling the electric drill with the Hex Nut Socket Sleeve Magnetic installed at one end, turn on the electric drill and it can be used.
Contact Information
- 19 Hayezira St. Industrial Zone Ramla 7255616 www.telran.co.il office@telran.co.il
- fax. 03-5214524
- Technical support *2023 phone: 03-5575110
FAQ
- Q: What is the pulling force of the electric threading wire machine?
A: The pulling force is not specified in the manual. - Q: Can the bend pipe be omitted during usage?
A: Yes, the bend pipe insertion step can be omitted if not needed for your application.
Documents / Resources
 | Telran 320163 Electric Threading Wire Machine [pdf] Instructions 320163, 320163 Electric Threading Wire Machine, Electric Threading Wire Machine, Threading Wire Machine, Wire Machine, Machine |