teddybed Single Flippable Bed Installation Guide

teddybed Single Flippable Bed

Assembly Instructions

ASSEMBLY REQUIREMENT
2 PERSON ASSEMBLY I 15 MINUTES ASSEMBLY TIME (APPROXIMATE)

TOOLS REQUIRED
ALLEN WRENCH

ASSEMBLY PREPARATION

1. Remove all packaging materials, staples and packing straps from the carton.
2. Refer to Parts Checklist and ensure they are complete before you start assembling.
3. Place all components on a clean, flat and soft surface (e.g. carpet or rug) to prevent parts from getting scratched.

TIPS FOR ASSEMBLY

1. Allow ample room for assembly and in close proximity to where product will be placed.
2. Assemble the product on a surface that does not scratch or damage the exterior and finish of the furniture
3. During assembly, do not over-tighten any fittings as this may cause damage.
4. Do not use power tools to assemble this product.
5. Do not sit or stand on the partially assembled product, only use the product for which it is intended.

CARE AND USE

• Avoid placing bed in direct sunlight
• Vacuum regularly on low suction
• Blot spills immediately with an absorbent towel or clean, damp cloth
• Spot clean with upholstery shampoo, mild detergent or a mild cleaning solvent
• Avoid scrubbing and the use of harsh detergents

SAFETY PRECAUTIONS

1. KEEP ALL HARDWARE PARTS OUT OF REACH OF CHILDREN AND ANIMALS.
2. DISPOSE PLASTIC PACKAGING MATERIAL IMMEDIATELY TO AVOID ANY RISK OF SUFFOCATION

PARTS CHECK LIST

1. 1 PC
2. 1 PC
3. 1 PC
4. 1 PC
5. =1 PC
6. 1 PCS
7. 2 PC
8. 1 PC

HARDWARE CHECK LIST

SAFETY NOTES

Before attaching the side rails, determine which side will have the safety guardrail.
For the side without the guardrail: Position the side rail so that any pre-drilled holes face downward (toward the floor).
This prevents children from inserting fingers into the holes.

Installation Guide

Step-1

Step-8
For safety, we recommend reinstalling the bed side rails with the holes facing downward toward the floor.

Use as a junior bed
Your bed Ready for use

Missing something?
We work very hard to ship a perfect product, but sometimes furniture or hardware go missing or get damaged in transit.
Please contact us and we’ll quickly make it right.

Need some help? Our support team is here for you

Teddy Bed Australia Support
Support@teddybed.com.au
www.teddybed.com.au

Teddy Bed New Zealand Support
Support@teddybed.com
www.teddybed.co.nz