Sensor Module Manuals & User Guides

YAHA BME688 Temperature Humidity Sensor Module Instructions

June 21, 2026

YAHA BME688 Temperature Humidity Sensor Module Specifications Feature Specification Package LGA 3.0 * 3.0 * 0.93 mm³ Detection Support Barometric pressure, environmental temperature, relative humidity, VOC gas change detection. Applicable to various additional gases (VSC, carbon monoxide, hydrogen, etc.) +…

Brand: YAHA

Taotalhomy ALS-PT19 Analog Light Sensor Module Instructions

June 11, 2026

Taotalhomy ALS-PT19 Analog Light Sensor Module INSTRUCTION MANUAL Quick Start Guide: Connect the sensor module to the Arduino. Power the module with 2.5V to 5.5V. Upload the appropriate code to read light values. Monitor the output for light intensity. Warnings:…

Brand: Taotalhomy

AI-Link MR60I13I6 60 GHz Radar Sensor Module Owner’s Manual

June 8, 2026

Model MR60I13I6 Datasheet 60GHz radar sensor Module [BGT60TR13C] Version：1.0 <Specification may be changed with out prior notice> Sichuan AI-Link Technology Co.,Ltd MR60I13I6 60 GHz Radar Sensor Module Copyright © Sichuan Al-Link Technology Co., Ltd. All Rights Reserved. The information and…

Brand: AI-LINK

ICGOICIC WCS Series Hall Current Sensor Module Owner’s Manual

May 24, 2026

ICGOICIC WCS Series Hall Current Sensor Module Product Info The WCS Series Hall Current Sensor Module is a professional-grade solution for non-contact DC current measurement and over-current protection. Featuring a high-precision Hall-effect IC and an adjustable comparator circuit, it allows…

Brand: ICGOICIC

Jingzan ACS712ELC-30A Hall Current Sensor Module User Manual

May 24, 2026

Jingzan ACS712ELC-30A Hall Current Sensor Module Technical Specifications Parameter Specification Sensor Chip ACS712ELC-30A Supply Voltage (VCC) 5V DC Measurement Range -30A to +30A Output Sensitivity 66mV/A Zero Current Output VCC/2 (e.g., 2.5V at 5V VCC) Operating Temperature -40°C to +85°C…

Brand: Jingzan

WINGONEER KY-003 Standard Hall Current Sensor Module Instruction Manual

May 24, 2026

WINGONEER KY-003 Standard Hall Current Sensor Module Specifications Feature Specification Chipset A3144 Hall-Effect Switch Operating Voltage 3.3V to 5V DC Output Type Digital (Open-Collector) Logic State Active Low (GND on detection) Operating Temperature -40°C to +85°C Dimensions Approx. 18.5mm x…

Brand: Wingoneer

SGR RKM1179S 24GHz Radar Sensor Module User Guide

April 26, 2026

SGR RKM1179S 24GHz Radar Sensor Module Technical Specifications Parameter Min Typical Max Unit Test Conditions@25℃ Supply Voltage VDD 3.6 5 5.5 V       Current   76   mA Average power consumption @ 5V   168   mA Peak…

Brand: SGR

IDUINO ME084 MQ-2 Smoke Gas Detector Sensor Module User Manual

March 18, 2026

IDUINO ME084 MQ-2 Smoke Gas Detector Sensor Module Specification Power supply needs: 5V A gas, natural gas, city gas, has better sensitivity There are four screw holes for easy positioning Has a long life and reliable stability Rapid response and…

Brand: IDUINO

Botland SHT30, SHT35 chip Temperature and Humidity Sensor Module Owner’s Manual

February 19, 2026

Botland SHT30, SHT35 chip Temperature and Humidity Sensor Module Basic feature Chip selecUon SHT3 5 chlp Power DC5V~DG24V Temperature Measuring Range -30'C - 80"C Hum idity Measuring Range 0 - 100 %RH Chip accuracy Temperature, ± 0.3' C Temperature, ±…

Brand: botland

SENSIRION SEN6x Series Environmental Sensor Module Instruction Manual

February 5, 2026

SEN6x – Temperature Acceleration and Compensation Instructions SEN6x Series Environmental Sensor Module Deriving the Optimal Parameter Set for Offset Compensation and Acceleration of Temperature & Relative Humidity This application note provides instructions on how to compensate the temperature reading of…

Brand: SENSIRION