PPE Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for PPE products.

Tip: include the full model number printed on your PPE label for the best match.

PPE manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

PPE 114002700 Fuel Coolant Pump Relocation Kit Installation Guide

May 12, 2026

PPE 114002700 Fuel Coolant Pump Relocation Kit Installation Guide PPEpower.com CONTENTS A. Stainless Steel Relocation Bracket (1) B. Lower Pump Hose (1) C. Upper Pump Hose (1) D. Extension Harness (1) E. Worm-drive Hose Clamps (4) F. Stainless Steel Nylock…

Brand: PPE

115672017 Upper MAP Sensor Relocation Block Installation Guide

April 4, 2026

PPE 115672017 Upper MAP Sensor Relocation Block Specifications Product Name: Upper MAP Sensor Relocation Block Compatibility: GM 6.6L Duramax L5P Manufacturer: PPEpower.com Contents A. MAP Sensor Spacer B. Viton O-ring C. M6 Socket Head Cap Screw INSTALLATION Disconnect the negative…

Brand: PPE

PPE 115672023 Lower MAP Sensor Relocation Block Installation Guide

April 1, 2026

PPE 115672023 Lower MAP Sensor Relocation Block CONTENTS A. MAP Sensor Spacer B. Viton O-ring C. M6 Socket Head Cap Screw PRODUCT RESOURCES INSTALLATION Disconnect the negative battery terminal from both batteries and allow at least 15 minutes for the…

Brand: PPE

PPE 224065000 Performance Transmission Cooler Bar and Plate Installation Guide

March 7, 2026

PPEpower.com Performance Transmission Cooler Bar and Plate 2019 - 2025 RAM 2500/3500 6.4L Hemi w/ 8HP75 2019 - 2024 RAM 2500/3500 6.7L Cummins SO w/ 68RFE (224065000) Installation Guide R10.25(1) Transmission Cooler Bar and Plate CONTENTS A. (1) Transmission Cooler…

Brand: PPE

PPE 119010300 Heat Exchanger for GM 3.0L Duramax Intercooler Instruction Manual

February 16, 2026

PPE 119010300 Heat Exchanger for GM 3.0L Duramax Intercooler CONTENTS A (1) Heat Exchanger for GM 3.0L Duramax Intercooler Tools needed: T-15 torx bit 10 mm socket 13 mm socket 15 mm socket U-groove clip removing tool Plier Break-In Service…

Brand: PPE

PPE 228153400 Pacific Performance Engineering Heavy-Duty Transmission Pans Installation Guide

February 11, 2026

PPE 228153400 Pacific Performance Engineering Heavy-Duty Transmission Pans CONTENTS A (1) Heavy-Duty Cast Aluminum Transmission Pan B (1) Removable, replaceable filter (installed) C (1) Neodymium magnet-equipped drain plug (installed) D (1) 1/8” NPT plug (installed) E (13) M6 x 1…

Brand: PPE

PPE 124062101,124062103 Performance Transmission Cooler Bar and Plate Style Installation Guide

January 26, 2026

PPE 124062101,124062103 Performance Transmission Cooler Bar and Plate Style CONTENTS A (1) Bar and Plate Style Transmission Cooler B (2) Transmission line fittings with clips PREPARATION Step 1. Engine off and cool. Step 2. Remove fan shroud. Step 3. Remove…

Brand: PPE

PPE 158040100 Idler Pivot Assembly Installation Guide

January 25, 2026

PPE 158040100 Idler Pivot Assembly Location of optional weld-on bracket Installation Step 1: Remove stock idler pivot. Save stock hardware for installation of replacement PPE Idler Pivot Assembly. Step 2: Install PPE Idler Pivot Assembly in the same location as…

Brand: PPE

PPE 118034250 Harmonic Balancer Bolt Installation Guide

January 25, 2026

PPE 118034250 Harmonic Balancer Bolt CONTENTS A (1) Harmonic Balancer Bolt B (1) Assembly Lubrication INSTALLATION Step 1: Engine off and cool. Step 2: Disassemble the required components to gain access to the harmonic balancer & balancer bolt. Step 3:…

Brand: PPE

PPE 215032023 Intercooler Kit Installation Guide

January 21, 2026

PPE 215032023 Intercooler Kit CONTENTS A. (1) Intercooler B. (1) Passenger Side Intercooler Hose (Hot Side) C. (1) Driver Side Intercooler Hose (Cold Side) D. (2) Aluminum Quick-Connects E. (3) W-Style Hose Clamp, 52-76mm F. (1) W-Style Hose Clamp, 59-83mm…

Brand: PPE

Installation Guide: PPE Bar and Plate Transmission Cooler and A/C Condenser Kit for 2010-2012 RAM 6.7L Cummins

installation guide • June 7, 2026

Step-by-step installation instructions for the PPE Bar and Plate Transmission Cooler and A/C Condenser Kit for 2010-2012 RAM 6.7L Cummins trucks.

Brand: PPE

PPE Release Valve Shim Kit Installation Guide

installation guide • May 31, 2026

Installation instructions for the PPE Release Valve Shim Kit, compatible with 2004.5-2010 GM 6.6L Duramax and 2007.5-2010 Cummins 6.7L engines.

Brand: PPE

Installation Guide: Heavy-Duty Forged Tie Rod Assemblies for 2007-2026 GM 1500 Trucks and SUVs

installation guide • May 21, 2026

Step-by-step installation instructions for PPE Heavy-Duty Forged Tie Rod Assemblies on 2007-2026 GM 1500 trucks and full-size SUVs.

Brand: PPE

Installation Guide: Crankcase Ventilation Oil/Water Separation Kit for 2019-2023 RAM 1500 3.0L EcoDiesel

installation guide • May 16, 2026

Step-by-step installation instructions for the PPE Crankcase Ventilation Oil/Water Separation Kit designed for 2019-2023 RAM 1500 3.0L EcoDiesel vehicles.

Brand: PPE

PPE Performance Transmission Cooler Installation Guide (124064000)

installation guide • May 10, 2026

Installation guide for the PPE Performance Transmission Cooler (Bar and Plate Style) for 2015-2016 LML GM 6.6L Allison 1000/2000 Series vehicles.

Brand: PPE

PPE Fuel Coolant Pump Relocation Kit Installation Guide for GM 6.6L Duramax (L5P)

Installation Guide • April 23, 2026

Detailed installation instructions for the PPE Fuel Coolant Pump Relocation Kit designed for GM 6.6L Duramax L5P engines. Includes a parts list, step-by-step guidance, and essential disclaimers and warranty information.

Brand: PPE

PPE Xcelerator Installation and User Guide for Duramax Diesel

Installation Guide • April 17, 2026

Comprehensive guide for installing and using the PPE Xcelerator tuner on GM 6.6L Duramax Diesel engines (2001-2010 LB7/LLY/LBZ/LMM), covering features, calibration, and troubleshooting.

Brand: PPE

PPE Forged XR® Tie Rods Installation and Maintenance Guide for GM Duramax Trucks

Installation Guide • April 17, 2026

Comprehensive installation and maintenance guide for PPE Forged XR® Tie Rods, designed for 2001-2025 GM 2500/3500 Duramax trucks. Includes step-by-step instructions, part identification, and warranty information.

Brand: PPE

PPE Performance Transmission Cooler Installation Guide | GM 6.6L Duramax (L5P)

Installation Guide • April 9, 2026

Detailed installation guide for the PPE Performance Transmission Cooler Bar and Plate (Part #124065000) for 2017-2020+ GM 6.6L Duramax (L5P) trucks with Allison 1000/2000 Series Transmissions. Includes disassembly and step-by-step installation instructions.

Brand: PPE

PPE EGR Valve O-Ring & Gasket Kit Installation Guide for Ford 6.0L Power Stroke

installation guide • April 9, 2026

Installation guide for the PPE EGR Valve O-Ring & Gasket Kit (Part #316160000) for 2003-2010 Ford 6.0L Power Stroke engines. Includes step-by-step instructions, component identification, and important disclaimer and warranty information.

Brand: PPE

2011-2023 GM 6.6L Duramax Extreme-Duty Forged 7/8" Drilled Steering Assembly Kit Installation Guide | PPE

Installation Guide • March 27, 2026

Official installation guide for the PPE 2011-2023 GM 6.6L Duramax Extreme-Duty Forged 7/8" Drilled Steering Assembly Kit (Part #158101120). Includes detailed installation notes, torque specifications, liability disclaimer, and warranty information from Pacific Performance Engineering.

Brand: PPE

PPE Upper MAP Sensor Relocation Block Installation Guide for GM 6.6L Duramax L5P

Installation Guide • March 18, 2026

Step-by-step installation guide for the PPE Upper MAP Sensor Relocation Block, designed for GM 6.6L Duramax L5P engines. Includes parts list, installation instructions, and important liability and warranty information.

Brand: PPE

PPE Rubber Sucker SU-104 Bellows Type Instruction Manual

No. 104 • September 12, 2025 • Amazon

Comprehensive instruction manual for the PPE Rubber Sucker SU-104 Bellows Type, detailing its features, installation, operation, maintenance, and specifications for Duplo Collator machines.

Brand: PPE

Wash Up Blade Instruction Manual

K-5866 • September 10, 2025 • Amazon

Instruction manual for the PPE Wash Up Blade, Model K-5866, compatible with Komori Lithrone 28 and Sprint 28 offset presses. Includes setup, operation, maintenance, troubleshooting, and specifications.

Brand: PPE

2 Hole Manual Table Top Punch KW-Trio 9330 190 Sheets Capatity

09930 • September 8, 2025 • Amazon

2 Hole Manual Table Top Punch ‧ Lightweight aluminum base ‧ Punches up to 190 sheets ‧ Precise paper guide ‧ Built-in handle lock ‧ Spare punch pin set : 01300215

Brand: PPE

Perfecting Jacket for Heidelberg SM74

PCE030JHEIP003 • August 18, 2025 • Amazon

Perfecting Jacket For Heidelberg SM74 - Calibrated surface for best quality print - Long-lasting high quality ceramic coating - Very durable, can resist high heat temperature - Additional sizes are available for other popular offset presses - For use with Heidelberg SpeedMaster…

Brand: PPE

Instruction Manual for PPE Cutting Sticks MBM Ideal Triumph 3905 3915

EXC030CS4461 • July 14, 2025 • Amazon

Comprehensive instruction manual for PPE Cutting Sticks, designed for MBM Ideal Triumph 3905 and 3915 paper cutters. Includes setup, operation, maintenance, troubleshooting, and specifications.

Brand: PPE

Polar Paper Cutter Air Table Valve Instruction Manual

10302 • July 12, 2025 • Amazon

Comprehensive instruction manual for the PPE Polar Paper Cutter Air Table Valve (Model 10302), including installation, functionality, maintenance, troubleshooting, and specifications for Heidelberg Guillotine systems.

Brand: PPE

Polar 115 Standard Cutting Sticks User Manual

EXC011601045 • July 12, 2025 • Amazon

Comprehensive user manual for Polar 115 Standard Cutting Sticks, including setup, operation, maintenance, troubleshooting, and specifications for model EXC011601045.

Brand: PPE

Polar Blade Standard 71, 72C, 75, Polar Paper Cutting Blade 12 Holes

Polar 43250 • July 2, 2025 • Amazon

Holes: 12 Length: 34.173" Width: 4.094" Thickness: 0.381"

Brand: PPE

Numbering Cam for Heidelberg GTO 46 / GTO 52 User Manual

10585 • June 29, 2025 • Amazon

Comprehensive user manual for the PPE Numbering Cam, model 10585, designed for Heidelberg GTO 46 and GTO 52 printing presses. Includes installation, operation, maintenance, and troubleshooting.

Brand: PPE