Product Overview
The PPE KW-Trio 9330 is a robust 2-hole manual table top punch designed for efficient paper punching. Featuring a lightweight aluminum base, it is capable of punching up to 190 sheets of paper at once, making it ideal for office and professional use. Its precise paper guide ensures accurate hole placement, and a built-in handle lock provides safe storage.
Image: The PPE KW-Trio 9330 2-Hole Manual Table Top Punch, showcasing its sturdy design and lever handle.
Setup Instructions
- Unpacking: Carefully remove the punch from its packaging. Inspect for any damage during transit.
- Placement: Place the punch on a stable, flat table or desk surface. Ensure there is enough space for the handle to operate freely.
- Handle Release: If the handle is locked down, gently push the handle down slightly and slide the built-in handle lock mechanism to release it.
Image: A detailed view of the punch highlighting key components: the precise paper guide, built-in handle lock, and the sturdy metal base.
Operating Instructions
- Prepare Paper: Gather the sheets of paper you wish to punch. Ensure the stack is neat and free of staples or clips. The punch can handle up to 190 sheets of standard paper.
- Adjust Paper Guide: Slide the precise paper guide to the desired position to ensure consistent hole placement for all sheets. For standard 2-hole punching, align the guide to the appropriate paper size markings.
- Insert Paper: Insert the stack of paper firmly against the paper guide and into the punching slot until it reaches the backstop.
- Punching: Firmly press down the handle with a smooth, continuous motion until the punch pins pass completely through the paper.
- Release Handle: Release the handle, allowing it to return to its upright position.
- Remove Paper: Carefully remove the punched paper.
- Handle Lock (for storage): When not in use, push the handle down and engage the built-in handle lock to keep the handle in a compact, safe position.
Maintenance
- Chip Tray Emptying: Regularly check and empty the paper chip tray located at the bottom of the punch. A full tray can impede punching performance.
- Cleaning: Wipe the exterior of the punch with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Punch Pin Replacement: The punch comes with a spare punch pin set (part number 01300215). If the punch pins become dull or damaged, they can be replaced. Refer to the manufacturer's instructions for specific replacement procedures, typically involving unscrewing and replacing the worn pins.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holes are not clean or complete. |
|
|
| Paper jams. |
|
|
| Uneven hole placement. |
|
|
Specifications
- Model: KW-Trio 9330 (Manufacturer Part Number: 09930)
- Hole Count: 2
- Operation Mode: Manual
- Punching Capacity: Up to 190 sheets (standard paper)
- Material: Lightweight Aluminum Base
- Item Weight: 8 pounds
- Package Dimensions: 20 x 8 x 4 inches
- UPC: 705333496673
- Spare Punch Pin Set: 01300215
Warranty and Support
For warranty information, technical support, or to inquire about replacement parts, please contact the manufacturer, PPE, or the seller, Printer's Parts & Equipment USA. Please have your model number (KW-Trio 9330 or 09930) and UPC (705333496673) available when contacting support.
This product is subject to a 30-day return policy for refund or replacement, as per the seller's terms.
