Power Module Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Power Module products.

Tip: include the full model number printed on your Power Module label for the best match.

Power Module manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

abl Fusion Combo Under Desk Power Module User Manual

March 6, 2026
abl Fusion Combo Under Desk Power Module Thank you for purchasing ABL's Fusion power module. Fusion has been manufactured and tested in accordance with relevant standards (see contact page). INSTALLATION OPTION 1 - Fix the module under the desk Slide…

Donghaorong GL-10 Power Module Instructions

February 3, 2026
Donghaorong GL-10 Power Module Specifications Item Specifications Output channel 16 Output connecting mode 18-point wiring terminal Output type Transistor output Power voltage 24 VDC (-15% to 20%) Output voltage class 12 to 24 V (-5% to 20%) Internal 5 V…

ANKER SOLIX X1 Power Module User Guide

January 21, 2026
About This Guide This document provides information and use instructions about the Anker SOLIX X1 Power Module X1-H(5~12)K-T series or hybrid three-phase power modules. Product Introduction 2.1 Product Overview Function The Anker SOLIX X1 Power Module X1-H(5~12)K-T series (power module…

Chroma CA-888 Power Module User Manual

December 7, 2025
Chroma CA-888 Power Module PRODUCT INFORMATION Thank you for purchasing ABL's Chroma power module. Chroma has been manufactured and tested in accordance with relevant standards. OVERVIEW INSTALLATION Place the module onto a flat surface and place the clamps on the…

MICROCHIP ProASIC Plus Power Module Owner’s Manual

December 7, 2025
ProASIC Plus Power Module Quickstart Card Overview (Ask a Question) ProASIC Plus® Power Module (APA-POWER-MODULE) with FlashPro4/FlashPro5 is a programming solution for Microchip's ProASIC Plus FPGA devices. The ProASIC Plus Power Module replaces the FlashPro_Lite programmer and is supported by…

MICROCHIP AN6046 DP3 Power Module Instruction Manual

November 26, 2025
Mounting Instruction for DP3 Power Module AN6046 Introduction This application note describes general concepts, guidelines, and recommendations for the procedures and specifications related to heatsink installation, Printed Circuit Board (PCB) mounting, and  unmounting for the Microchip Dual Pack 3 (DP3)…

FE P642 Series Intelligent Power Module Instruction Manual

November 19, 2025
FE P642 Series Intelligent Power Module Product Information Specifications: Model: P642 Series 6MBP**XT*065-50 Type: Small IPM (Intelligent Power Module) Manufacturer: Fuji Electric Co., Ltd. Application: Inverter for Compressor motor or fan motor for Room Air Conditioner, Inverter for Compressor motor…