IP2366 Step-Down Power Module Main Controller User Manual

IP2366 Step-Down Power Module Main Controller

IP2366 Step-Down Power Module Main Controller

Warning

Features
  1. The IP2366 controller chip handles overall control and coordination, providing more stable output and more responsive performance.
  2. Quickly configure parameters via DIP switches—no need to repeatedly solder resistors, saving time during setup.
  3. Synchronous buck-boost MOSFETs: Four MOSFETs work in tandem to improve efficiency and reduce heat generation
  4. 10-position DIP switch for quick configuration; easily switch between three output levels: 65W, 100W, and 140W
  5. This product supports 2-6S battery configurations, allowing for flexible user adaptation
  6. Built-in multiple protections including overvoltage, overcurrent, short circuit, and over temperature, providing comprehensive protection for added peace of mind
Parameter Display: 0.96-inch color display
Parameter Viewing: Real-time display of voltage, current, power, etc.
Fast Charging Protocols: PPS/PD/SCP/FCP/QC/AFC/PE/BC1.2
Display: 0.96-inch TFT color screen, ST7735, 80×160
Button Controls: S1 (Up/Decrease), S2 (Confirm/Long Press to Return), S3 (Down/Increase)
Supports 2-6S battery cell configuration
Supports 3.65V/4.2V battery voltage settings
Supports three power settings: 65W, 100W, and 140W
Supports lithium iron phosphate (LiFePO4) and ternary lithium batteries
Package include Fast Charging Module * 1

With Display

With Display

Display not included

Display not included

More stable output and more sensitive response

The IP2366 main control chip is responsible for the overall control and coordination of the machine
More stable output and more sensitive response

Quickly configure parameters through dip switch

No need to repeatedly weld resistors, setting is more time-saving
Quickly configure parameters through dip switch

Synchronous buck boost MOS transistor

Four MOS working together to improve efficiency and reduce heat generation

Quick configuration of 10 digit dialing code

65W/100W/140W three level output can be switched freely
Synchronous buck boost MOS transistor

Users can flexibly adapt

This product covers 2-6S battery solutions

Comprehensive protection brings peace of mind

Comes with multiple protections such as overvoltage/overcurrent short circuit/overheating
Comprehensive protection brings peace of mind

Comprehensive protection brings peace of mind

IP2366 Step-Down Power Module

IP2366 Step-Down Power Module

Flexible Configuration One-Click Setup

Flexible Configuration One-Click Setup

Three-Channel Power Efficiency Management

Three-Channel Power
Efficiency Management

Multi-Cell Battery Flexible Matching

Multi-Cell Battery Flexible Matching

See the Details Pass the Test with Confidence

See the Details Pass the Test with Confidence

Two Versions Available Choose as Needed

Two Versions Available Choose as Needed

Color Display

Color Display

Color Display

10-Digit DIP Switch Settings

10-Digit DIP Switch Settings

Explanation of Positive and  Negative Terminals

Explanation of Positive and  Negative Terminals

Explanation of Positive and  Negative Terminals

Product parameters

Display mode: 0.96-inch color display screen Display mode: 0.96-inch color display screen Fast charging protocol: PPS/PD/SCP/FCP QC/AFC/PE/BC1.2
Display screen: 0.96-inch TFT color screen ST7735 80×160 Button control: S1 up/down S2 confirm/long press to return S3 down/add Supports 2-6S batteries Serial number setting
Supports 3.65V/4.2V Battery voltage setting Supports 65W/100W 140W three power settings Support lithium iron phosphate ternary lithium battery

Product parameters

Screen Interface Overview

Screen Interface Overview

Open Source Explanation

Open Source Explanation

Documents / Resources

PDF thumbnailIP2366 Step-Down Power Module Main Controller
User Manual · Power Module, IP2366

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.