Multi-tool Manuals & User Guides

SmallRig 5294 Edc Multi Tool Instruction Manual

February 1, 2026

SmallRig 5294 Edc Multi Tool Thank you for purchasing SmallRig's product. Please read this Operating Instruction carefully Please follow the safety warnings. In the Box Multi-Tool x 1 Storage Bag x 1 Operating Instruction x 1 Notice  This product contains…

Brand: SmallRig

milwaukee C12 MT Sub Compact Multi-tool Instruction Manual

January 15, 2026

milwaukee C12 MT Sub Compact Multi-tool TECHNICAL DATA Installation WARNING The vibration and noise emission level given in this information sheet has been measured in accordance with a standardizedtest given in EN 62841 and may be used to compare one…

Brand: Milwaukee

makita DTM53 Cordless Multi Tool Instruction Manual

January 8, 2026

makita DTM53 Cordless Multi Tool SPECIFICATIONS Model: DTM53 Oscillation per minute 6,000 - 20,000 min-1 Oscillation angle, left/right 1.6° (3.2° total) Overall length (with BL1860B) 329 mm Net weight 1.7 - 2.0 kg Rated voltage D.C. 18 V Due to…

Brand: Makita

BIGGER BOYS TOYS RLMT40DR 4 in 1 Cordless Multi Tool Owner’s Manual

November 13, 2025

BIGGER BOYS TOYS RLMT40DR 4 in 1 Cordless Multi Tool Specifications Product Name: Cordless Multi-tool 4 in 1 Manufacturer: Bigger Boyz Toyz Phone: 02 4257 4787 Email: bbt@bbta.com.au Warehouse Address: Unit 2/3 Delta Place, Albion Park Rail NSW 2527 Product…

Brand: BIGGER BOYS TOYS

STAYER MULTI L20 Cordless Multi Tool Instruction Manual

September 2, 2025

Operating instructions MULTI L20 MULTI TOOL 300 PRO Declaration of Conformity We declare under our sole responsibility that the product described under “Technical Data” is in conformity with the following standards or standardization documents: EN 62841-1, EN 628412-4, EN 62841-2-11,…

Brand: STAYER

Palby 1852 Storm Multi Tool Instruction Manual

August 23, 2025

Manual Storm Multi Tool 1852 Storm Multi Tool Operation & maintenance keeping your multi-tool clean and fully dry, especially after use. When necessary, rinse the tool in fresh water, or with a mild solution of diluted soap and water, and…

Brand: Palby

TRUPER PRO MULH-35A Oscillating Multi Tool Instruction Manual

June 26, 2025

TRUPER PRO MULH-35A Oscillating Multi Tool Applies for: Code 102429 Model MULH-35A CAUTION Read this manual thoroughly before using the tool. CAUTION To gain the best performance of the tool, prolong the duty life, make the Warranty valid if necessary,…

Brand: TRUPER PRO

InfiShark BLEShark Nano Compact Multi Tool User Guide

June 12, 2025

InfiShark BLEShark Nano Compact Multi Tool BLEShark Nano Setup Guide Full manual at: docs.infishark.com Powering On/Off Flip the side switch to turn the BLEShark Nano on or off. If the BLEShark Nano doesn’t turn on, charge the battery using the…

Brand: InfiShark

RAIDER RDP-OMT05 Oscillating Multi Tool User Manual

April 23, 2025

RAIDER RDP-OMT05 Oscillating Multi Tool Double isolation Always wear hearing protection! Refer to instruction manual booklet! Wear safety glases! Wear dust mask! Dear Customer, Congratulations on the purchase of machinery from the fastest growing brand of electric and pneumatic tools…

Brand: Raider

FLEX FXA4111 24V Brushless Oscillating Multi Tool Instruction Manual

April 3, 2025

FLEX FXA4111 24V Brushless Oscillating Multi Tool Specifications Model: FXA4111 Type: 24V Brushless Oscillating Multi-Tool SAFETY SYMBOLS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your…

Brand: FLEX

AMD320/DMD320/KMD320 Multi-Tool Parts Diagram

parts list diagram • July 31, 2025

Exploded view diagram detailing the parts of the AMD320, DMD320, and KMD320 multi-tool models, including components like the motor, housing, and various accessories.

Brand: Multi-Tool