Motion Sensor Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Motion Sensor products.

Tip: include the full model number printed on your Motion Sensor label for the best match.

Motion Sensor manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

V-TAC VT-8153 Infrared Motion Sensor Instruction Manual

March 27, 2026
V-TAC VT-8153 Infrared Motion Sensor TECHNICAL DATA Model VT-8153 SKU 24355 Input Voltage AC: 220-240V, 50/60Hz Ambient Light <3-2000LUX (adjustable) Time Delay Min.10sec±3sec Max. 15min±2min Rated Load 800W (Traditional Lighting) 400W (LED Lighting) Detection Range 360° Detection Distance 6m max(<24°C)…

EMOS H5024 PIR Sensor Motion Sensor Installation Guide

March 24, 2026
EMOS H5024 PIR Sensor Motion Sensor Specifications Model: 3069052040-101-H5024 Detection Area: 8m (side view) Valid Detection Area: Cross area Installation Mount the sensor at a height of 1.2m from the ground. Ensure the sensor has a clear line of sight…

MOES ZSS-P01-PIR-A-MS-FA27 PIR Motion Sensor User Manual

March 3, 2026
MOES ZSS-P01-PIR-A-MS-FA27 PIR Motion Sensor Specifications Model: ZP01/P01 Size:71x25 x20 mm Battery: LR03-1.5V/AAA x2 Zigbee Frequency: IEEE 802.15.4 Wi-Fi Standard: 2.4GHz Wi-Fi Frequency: IEEE 802.11b/g/n Detect Angle:128° Detect Distance:≤6m Frequency Band:2.400-2.483GHz Maximum Radio Transmit Power:<+10dBm Product Information The HOME SMART…

EMOS IP-2310Z Zigbee Motion Sensor User Guide

February 21, 2026
EMOS IP-2310Z Zigbee Motion Sensor Dimension Setup Instructions Safety information Do not disassemble, modify, or repair the product or batteries (if the product contains batteries). Contact a qualified technician if needed Disconnect from power before cleaning. Clean only with a…

Tuya B0CR9WD47B Human Motion Sensor User Manual

February 20, 2026
Tuya B0CR9WD47B Human Motion Sensor User Manual 1 Network Configuration Power on the product. Push down to open the battery back cover, Install 2 AAA (LR03) batteries. Press the RESET button for 3s and release, the red LED will flash…