Mircom Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Mircom products.

Tip: include the full model number printed on your Mircom label for the best match.

Mircom manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Mircom LT-657 FX-2000 Addressable Fire Alarm Control Panel Instruction Manual

March 7, 2023

Addendum for LT-657 FX-2000 Installation and Instruction Manual LT-657 FX-2000 Addressable Fire Alarm Control Panel Following are some new features incorporated into the FX-2000 Fire Alarm Control Panel: We have a new UUKL feature on the FX-2000 Configurator used only…

Brand: Mircom

Mircom FX-2003-12NXTDS Network Fire Alarm Control Unit Owner’s Manual

March 7, 2023

FX-2003-12NXTDS Network Fire Alarm Control Unit Owner's ManualFX-2003-12NXTDS in a BBX-1024XTR enclosure with two optional RAX-1048TZDS modules Description Mircom’s FleX-Net Series is a powerful intelligent networkable fire alarm solution designed with many levels of flexibility to meet virtually any application…

Brand: Mircom

Mircom ALCN-792MISO/D Isolated Quad Loop Adder Module Owner’s Manual

March 7, 2023

Mircom ALCN-792MISO/D Isolated Quad Loop Adder Module Description The ALCN-792MISO Isolated Quad Loop Adder Module provides two addressable loops plus an additional two loops as part of the daughter board ALCN-792D which is mounted over the ALCN-792MISO. The quad loop…

Brand: Mircom

Mircom RAM-300LCD Series Remote Annunciator Instruction Manual

March 7, 2023

Mircom RAM-300LCD Series Remote Annunciator Introduction The RAM-300LCD is a remote annunciator used for the FA-300 Series and FX-350/351 Series Fire Alarm Panels. It provides remote access to the fire alarm panel. Note: Configuration of the FA-300 Series and FX-350/351…

Brand: Mircom

Mircom MIX-2251RAP Intelligent Smoke Sensor With Remote Test Owner’s Manual

March 7, 2023

Mircom MIX-2251RAP Intelligent Smoke Sensor With Remote Test Description Mircom’s low profile intelligent plug-in smoke detectors with integral communications provide features that surpass conventional detectors. Sensitivity is continuously monitored and reported to the panel where the desired detector sensitivity can…

Brand: Mircom

Mircom MIX-M500MAP Monitor Module Installation Guide

March 7, 2023

Mircom MIX-M500MAP Monitor Module SPECIFICATIONS Normal Operating Voltage: 15 to 32 VDC Maximum Alarm Current (LED on): 5.0mA (LED on) Average Operating Current: 400 μA, 1 communication every 5 seconds, 47k…

Brand: Mircom

Mircom MIX-4090 Device Programmer Instruction Manual

March 7, 2023

Mircom MIX-4090 Device Programmer INSTALLATION AND MAINTENANCE INSTRUCTIONS ABOUT THIS MANUAL This manual is included as a quick reference for use of the device to set addresses on sensors and modules in the MIX-4000 series. Note: This manual should be…

Brand: Mircom

Mircom MIX-2251APA Intelligent Photoelectric Smoke Sensors Installation Guide

March 7, 2023

Mircom MIX-2251APA Intelligent Photoelectric Smoke Sensors Specifications Operating Voltage Range: 15 to 32 VDC Average operating Current: 300µA @ 24 VDC (one communication every 5 seconds with LED blink enabled) Maximum Alarm Current (LED on:) 6.5 mA @ 24 VDC…

Brand: Mircom

Mircom WR-3001W Wireless Input-Output Unit Instruction Manual

March 7, 2023

Mircom WR-3001W Wireless Input-Output Unit Installation Caution: Excessive Force Improper installation or excessive force will damage the motherboard and modules being installed or removed. Caution: Static Sensitive Components Ensure AC and Battery power is disconnected before installing or removing any…

Brand: Mircom

Mircom MIX-M500SAPA Supervised Control Module Installation Guide

March 7, 2023

Mircom MIX-M500SAPA Supervised Control Module Specification Normal Operating Voltage: 15 to 32 VDC Maximum Alarm Current: 6.5mA (LED On) Average Operating Current: 400 µA max., 1 communication every 5 seconds 47k EOL resistor; 485uA max. (Communicating, NAC shorted). Maximum NAC…

Brand: Mircom