Lathe Manuals & User Guides

SEALEY SM2503A,SM2503B Drill Head for Mini Lathe Instruction Manual

March 30, 2026

SEALEY SM2503A,SM2503B Drill Head for Mini Lathe Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE…

Brand: SEALEY

JET GH-1440ZX Geared-Head Lathe Instruction Manual

March 23, 2026

GH-1440ZX Geared-Head Lathe Specifications Product: Geared-Head Lathe Model: GH-1440ZX Manufacturer: JET Address: 427 New Sanford Road LaVergne, Tennessee 37086 Contact: Ph.: 800-274-6848 Website: www.jettools.com Product Usage Instructions Safety Instructions It is crucial to read and understand the entire owner's…

Brand: JET

VEVOR WM210V-L Lathe Instruction Manual

March 7, 2026

VEVOR WM210V-L Lathe MATTERS NEEDING ATTENTION The information contained in this handbook is intended as a guide to the operation of these machines and does not form part of any contract. The data it contains has been obtained from the…

Brand: VEVOR

SKYSHALO 7X12 Mini Metal Lathe User Manual

February 13, 2026

MINI METAL LATHE USER MANUAL MODEL:7X12 Mini Metal lathe MODEL:7X2 Part List Part name Name MX-001 Headstock MX-002 Drive belt Cover MX-003 Machine Bed (Long) Mx-004 Longitudinal Slider(Big) MX-005 Tailstock MX-006 Cross Slider (Small) MX-007 Three Jaw Chunk MX-008 Turning…

Brand: SKYSHALO

VEVOR 7×12 400W Variable Speed Mini Lathe Instruction Manual

January 20, 2026

VEVOR 7x12 400W Variable Speed Mini Lathe Product Specifications Power: 550W brush motor Rotary diameter on transverse pallet: 80mm Centre distance: 350mm Width of the bed: 80mm Spindle speed range: 0-2500 RPM Metric threads: 0.4-2mm Spindle taper: MT3 Diameter of…

Brand: VEVOR

VEVOR CK4-4S-SS Lathe Chuck Series User Manual

December 26, 2025

VEVOR CK4-4S-SS Lathe Chuck Series Specifications Model: CK4-4S-SS / CK4-4K-3SET-SS / CK4-4S-4SET-SS / CK4-4K-5SET-SS Chuck Diameter: 4 inches Geometry Accuracy: Radial run-out: 0.005mm Axial run-out: 0.005mm Material: High-durability material for longer life and high-quality finish Product Usage Instructions To reduce…

Brand: VEVOR

VEVOR MX-210V Metal Lathe Instruction Manual

October 15, 2025

VEVOR MX-210V Metal Lathe Technical Support and E-Warranty Certificate www.vevor.com/support We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings…

Brand: VEVOR

MEEC TOOLS 022936 Wood Lathe Instruction Manual

July 28, 2025

MEEC TOOLS 022936 Wood Lathe Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall…

Brand: MEEC TOOLS

HOLZMANN D510F_230V Wood Turning Lathe User Manual

July 10, 2025

HOLZMANN D510F_230V Wood Turning Lathe Specifications Voltage: 230 V / 50 Hz Motor Power: 735 W Spindle Speed: Variable Distance Between Centers: 510 mm Swing Over Bed: 160 mm Morse Taper: MK2/MT2 Tail Spindle Travel: 90 mm Face Plate Diameter:…

Brand: HOLZMANN

VEVOR MCS1000 Wood Lathe User Manual

June 12, 2025

MCS1000 Wood Lathe Product Information Model: MCS1000 Product: Wood Lathe Specifications: Protection Class: III Manufacturer: VEVOR Model Number: MCS1000 Product Usage Instructions Matters Needing Attention Quality Assurance: Our company reserves the right to make changes to this specification and product…

Brand: VEVOR

WM210V-L Lathe Instruction Manual

Instruction Manual • January 11, 2026

Comprehensive instruction manual for the WM210V-L lathe, covering setup, operation, safety warnings, technical specifications, maintenance, and troubleshooting.

Brand: Lathe

Lathe Monthly Maintenance Checklist - Chester, Colchester, James Carr

Maintenance Checklist • December 5, 2025

Comprehensive monthly maintenance checklist for industrial lathes, including models from Chester Machine Tools, Colchester, and James Carr. Details checks for guards, gearbox, electricals, lubrication, and cleaning of key components. Includes lubrication specifications (ISO 32, ISO 68) and cleaning advice.

Brand: Lathe