KNX Manuals & User Guides

Zennio KNX Secure Securel v2 Encrypted Relay User Guide

December 9, 2022

Zennio KNX Secure Securel v2 Encrypted Relay DOCUMENT UPDATES Version Changes Page(s) b   Added instructions for performing a factory reset. INTRODUCTION So far, the data transmitted in a KNX automation installation was open and could be read and manipulated…

Brand: Zennio

ise KNX RF Multi Radiator Thermostat Instructions

October 29, 2022

ise KNX RF Multi Radiator Thermostat The spark: uniting intelligence and efficiency for a comfortable temperature. KNX RF Multi radiator thermostat Technical data Rated voltage: Supply via 2 x AA battery Battery life: Typically two heating periods KNX communication: RF1.M…

Brand: ise

KNX MDT SCN-RTC20.02 Time Switch Instruction Manual

October 15, 2022

SCN-RTC20.02 Time Switch Instruction Manual Important safety notes Danger High Voltage Installation and commissioning of the device only be carried out by authorized electricians. The relevant standards, directives, regulations, and instructions must be observed. The devices are approved for use…

Brand: KNX

Freedompro Easykon for KNX User Manual

September 19, 2022

Freedompro Easykon for KNX Easykon for KNX is an electronic DIN rail case device, designed to control KNX installations with apps and voice assistants from Apple, Google, Amazon, IFTTT and Home Assistant. With Easykon lights, shutters, sensors, thermostats and many…

Brand: Freedompro

JUNG KNX LED controller 5-gang User Manual

August 3, 2022

JUNG KNX LED controller 5-gang Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. Danger of electric shock. During installation and cable…

Brand: JUNG

KNX 390041SR LED Universal Dimming Actuator 4-Gang Instruction Manual

April 1, 2022

LED universal dimming actuator, 4-gang LED universal dimming actuator, 4-gang Art. no.: 390041SR Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire, or property damage are possible. Please read and…

Brand: KNX

basalte CHOPIN KNX Installation Guide

November 11, 2021

basalte CHOPIN KNX Safety instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. Failure to observe these instructions might damage the device. The device may only be installed and connected by professional electrical…

Brand: basalte

Intesis ASCII Server User Manual

August 2, 2021

KNX USER MANUAL Issue date: 04/2020 r1.4 ENGLISH Intesis™ ASCII Server – KNX Important User Information Disclaimer The information in this document is for informational purposes only. Please inform HMS Industrial Networks of any inaccuracies or omissions found in this…

Brand: Intesis