Freedompro makes smart home relays, shutter and outlet modules, and KNX gateways for app-based control, voice assistant integration, and everyday home automation.
Freedompro makes smart home relays, shutter and outlet modules, and Easykon gateways for KNX installations. These devices connect home equipment to apps, voice assistants and automation platforms, with compatibility depending on the model.
Browse Freedompro manuals for installation requirements, wiring diagrams, pairing instructions and troubleshooting guidance. Always follow the documentation for your exact model and use a qualified electrician for mains-powered installations.
For further assistance, visit the Freedompro Support Center.
Selected manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Browse this category for your exact model's manual. The official Freedompro Support Center also offers a searchable knowledge base at https://help.freedompro.eu/portal/en/kb.
After installation by a qualified electrician, follow the model's manual and the Freedompro app prompts to add and configure the device. Supported models may use a QR code for pairing.
Compatibility depends on the model. Documentation lists platforms such as Apple HomeKit, Google Home, Amazon Alexa, Matter, IFTTT and Home Assistant. Check your model's manual before pairing.
Its manual describes connecting power, Ethernet and the KNX bus, then using the web interface to map accessories and their group addresses. It also supports importing KNX project files.
The installation instructions call for a qualified electrician. Power must be disconnected and the absence of voltage verified before wiring or servicing.
