KLUS Manuals & User Guides

KOPRO-30 mounting instructions  Manual Parts needed to mount the KOPRO-30 extrusion  Tools needed for mounting: - drill - screwdriver NOTE! All LED strips must be connected to a 12 V or 24 V power supply. IMPORTANT: The manual presents the…

KLUS PDS-4-PLUS Extrusion Instruction Manual Tools PDS-4-PLUS extrusion (Ref. C1263) End cap* LED strip* Cover* Mounting bracket* Countersunk screw (6-8 mm / 0.24-0.31”) Gland* Power supply (12 V / 24 V)* *The selection of electronics and types of accesories available…

  KLUS C1575 Design LED Mounting Extrusion Directory PRODUCT DESCRIPTION For installation on facades Designed for IP68 and IK10 protection ratings Corrosion resistance at high salinity Corresponds to the width of the HR-MAX facade system Adjustable lighting angle Fill empty…

KLUS C3059 Design LED Mounting Extrusion Directory PRODUCT DESCRIPTION Two lighting directions Smooth profile walls Installation through the cover hook Fill empty fields Product nr. Fixture type Company Job name Date TECHNICAL SPECIFICATION Application  main and decorative lighting Mounting  suspended,…

JAZ mounting instructions Parts needed to mount the JAZ extrusion Extrusion (A) LED strip (B) Hanger (C) Cover (D) End cap (E) Tools needed for mounting: - drill NOTE! All LED strips must be connected to a 12 V or…