Kit Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Kit products.

Tip: include the full model number printed on your Kit label for the best match.

Kit manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

FIAMMA KIT VWT5 Transporter MV UK RHD Fitting Kit Instruction Manual

August 8, 2022

FIAMMA KIT VWT5 Transporter MV UK RHD Fitting Kit DIMENSION Package contents Check that nothing has been damaged or deformed during transport. In the event of doubts or questions concerning the installation, use or limitations of the product, contact the…

Brand: FIAMMA

Asetek AMD AM4 Retention Kit Instruction Manual

August 8, 2022

Asetek AMD AM4 Retention Kit InstructionINTRODUCTION Step Remove stock AM4 / AM5 mounting hardware by loosening the four screws, and removing the two plastic pieces. Keep the backplate in place. Step Orient collars based on the motherboard platform being used.…

Brand: ASETEK

SDC LRCA1R Cal-Royal REX Switch Kit Instruction Manual

August 7, 2022

SDC LRCA1R Cal-Royal REX Switch Kit Attach the switch mounting bracket where shown. Run switch wires along the side of the housing. If LR100 kit doesn’t have the mounting holes for the REX kit, then modify per dimensional reference shown…

Brand: SDC

SDC LRDX1R DETEX Rex Switch Kit Instruction Manual

August 7, 2022

SDC LRDX1R DETEX Rex Switch Kit INSTALLATION INSTRUCTIONS LRDX1R DETEX REX SWITCH KIT MODELS: 10, 20, 40, 50, 60 & 80 SERIES Remove the End Cap, End Cap bracket and Cover. Slide the REX bracket assembly into the device and…

Brand: SDC

SDC ED910 Arrow Electric Latch Retraction Kit Instruction Manual

August 7, 2022

SECURITY DOOR CONTROLS • WWW.SDCSECURITY.COM [t] 800.413.8783 • 805.494.0622 • E-mail: service@sdcsecurity.com • 801 Avenida Acaso, Camarillo, CA 93012 • PO Box 3670, Camarillo, CA 93011 INSTALLATION INSTRUCTIONS LR100AWK-ED910 ARROW ELECTRIC LATCH RETRACTION KIT MODEL: ED910 Retrofit Installation Note: 42"…

Brand: SDC

SDC LRFA1R Falcon DOR-O-MATIC REX Switch Kit Instruction Manual

August 7, 2022

SDC LRFA1R Falcon DOR-O-MATIC REX Switch Kit Instruction Manual Inductions Attach the switch assembly to the ELR unit with the supplied screws as shown. Route wires through the cable tie, along the side of the ELR and out. WIRING SPECIFICATION…

Brand: SDC

THULE 186007 Fits Kit Instruction Manual

August 7, 2022

Fits Kit Instruction Manual BMW iX3, 5-dr SUV, 21– BMW X1, 5-dr SUV, 16– BMW X2, 5-dr SUV, 18– BMW X3, 5-dr SUV, 10–17, 18-/ *11–17, 18- BMW X4, 5-dr SUV, 15–18, 19B MW X5, 5-dr SUV, 14–18,19- BMW X6,…

Brand: THULE

minbie PPSU Bottle Kit Instructions

August 7, 2022

minbie PPSU Bottle Kit INSTRUCTIONS FEEDING The correct way for feeding with Minbie is with the air valve up as shown in the diagram, not underneath. At the start of the feed hold your baby more upright, and hold the…

Brand: minbie

Cruiser Head Fj60 Sun Visor Swivel Refresh Kit User Manual

August 7, 2022

Cruiser Head Fj60 Sun Visor Swivel Refresh Kit Includes x1 Plastic Mount, x1 Internal locking star washer INSTRUCTION STEPS Step One Remove the Sun Visor mount from your FJ60. Loosen screw ‘A’ then twist the Bracket arm must be rotated…

Brand: Cruiser Head

Creality Sprite Extruder Pro Kit User Manual: Installation & Settings

August 7, 2022

The Creality Sprite Extruder Pro Kit is a high-performance extruder kit designed to improve your 3D printing experience. This user manual provides step-by-step instructions for the installation and settings of the kit. The manual includes a parts list, detailed installation…

Brand: Creality