Kit Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Kit products.

Tip: include the full model number printed on your Kit label for the best match.

Kit manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

SDC LRFA1R Falcon DOR-O-MATIC REX Switch Kit Instruction Manual

August 7, 2022

SDC LRFA1R Falcon DOR-O-MATIC REX Switch Kit Instruction Manual Inductions Attach the switch assembly to the ELR unit with the supplied screws as shown. Route wires through the cable tie, along the side of the ELR and out. WIRING SPECIFICATION…

Brand: SDC

THULE 186007 Fits Kit Instruction Manual

August 7, 2022

Fits Kit Instruction Manual BMW iX3, 5-dr SUV, 21– BMW X1, 5-dr SUV, 16– BMW X2, 5-dr SUV, 18– BMW X3, 5-dr SUV, 10–17, 18-/ *11–17, 18- BMW X4, 5-dr SUV, 15–18, 19B MW X5, 5-dr SUV, 14–18,19- BMW X6,…

Brand: THULE

minbie PPSU Bottle Kit Instructions

August 7, 2022

minbie PPSU Bottle Kit INSTRUCTIONS FEEDING The correct way for feeding with Minbie is with the air valve up as shown in the diagram, not underneath. At the start of the feed hold your baby more upright, and hold the…

Brand: minbie

Cruiser Head Fj60 Sun Visor Swivel Refresh Kit User Manual

August 7, 2022

Cruiser Head Fj60 Sun Visor Swivel Refresh Kit Includes x1 Plastic Mount, x1 Internal locking star washer INSTRUCTION STEPS Step One Remove the Sun Visor mount from your FJ60. Loosen screw ‘A’ then twist the Bracket arm must be rotated…

Brand: Cruiser Head

Creality Sprite Extruder Pro Kit User Manual: Installation & Settings

August 7, 2022

The Creality Sprite Extruder Pro Kit is a high-performance extruder kit designed to improve your 3D printing experience. This user manual provides step-by-step instructions for the installation and settings of the kit. The manual includes a parts list, detailed installation…

Brand: Creality

HARVEST TEC 474C Hay Indicator Kit Owner’s Manual

August 7, 2022

HARVEST TEC 474C Hay Indicator Kit Caution: Unhook the pump leads when testing, aligning or working around the hay indicator sensors or nozzles. The nozzles will spray if someone or something comes in front of the sensors when the applicator…

Brand: HARVEST TEC

HARVEST TEC 488 Light Kit for John Deere Round Baler Surface Wrap Compartment Instruction Manual

August 7, 2022

HARVEST TEC 488 Light Kit for John Deere Round Baler Surface Wrap Compartment INSTALLATION INSTRUCTIONS STEP 1: Center the lights in the compartment as low as possible on the surface between the latch and the handles. Position lights so the…

Brand: HARVEST TEC

HARVEST TEC 600RBC Moisture Sensor Kit Instruction Manual

August 6, 2022

HARVEST TEC 600RBC Moisture Sensor Kit Introduction Thank you for purchasing a Harvest Tec Model 600RBC Moisture Monitor System. This 600RBC Moisture Monitoring System has been designed to be operated through an Apple iPad (not included) using the Hay App.…

Brand: HARVEST TEC

SDC ED4200 Corbin Russwin Electric Latch Retraction Kit Instruction Manual

August 6, 2022

SDC ED4200 Corbin Russwin Electric Latch Retraction Kit INSTALLATION Retrofit Installation Note: 42" or 48" exit devices that have been modified to fit a 36" or smaller opening, may not have the required space to fit the standard E. L.…

Brand: SDC

HARVEST TEC 890CNH Scale Interface Kit Owner’s Manual

August 6, 2022

HARVEST TEC 890CNH Scale Interface Kit INTRODUCTION Congratulations on purchasing a Harvest Tec Model 890CNH Scale Interface Kit. This kit will allow you to write the exact bale weight into your job records. The kit will also write the rolling…

Brand: HARVEST TEC