Learn how to properly install and connect heating cables with the JBM-100-L-A Multiple Entry Power Splice Tee Connection Kit. This NEMA 4X-rated kit from Raychem is designed for industrial use, allowing you to connect up to three heating cables securely. Follow step-by-step instructions and safety guidelines provided in the manual for a successful installation. Be sure to check contents, handle core sealers with caution, and refer to the design guide for maximum circuit length. If you encounter skin irritation or overheating concerns, find solutions in the FAQ section.
Learn about the JBS-100-A Heat Tracing and Leak Detection system through this comprehensive user manual. Discover detailed instructions for product models E-100, E-150, JBM-100-A, JBS-100-L-A, and more.
Learn how to install and use the nVent RAYCHEM JBM-100-L-A Multi Entry Connection Kit with these detailed installation instructions. This kit is designed for hazardous locations and can connect up to three industrial parallel heating cables, including BTV-CR, BTV-CT, QTVR-CT, XTV-CT, KTV-CT, HTV-CT, and VPL-CT. Includes a plug-in light module to indicate when power is supplied.
Learn how to install and use the nVent RAYCHEM JBM-100-L-A Integrated Power connection kit for industrial parallel heating cables. This Type 4X-rated kit can connect up to three heating cables and includes a plug-in light module. Follow the included installation instructions carefully and ensure power is turned off before use. Approved for use in Class I, Div. 2 and Class II, Div. 2 hazardous locations. IECEx certified for use with various nVent RAYCHEM self-regulating cable models.
Learn how to properly install the nVent RAYCHEM JBM-100-L-A Wire Connector and Terminal Blocks kit with this comprehensive user manual. Designed for use with various industrial parallel heating cables, this Type 4X-rated connection kit includes a plug-in light module and can connect up to three heating cables to power or splice and tee two separate heat-trace circuits. Ensure proper installation to prevent shock or fire. For technical support, call nVent at (800) 545-6258.
