Raychem-LOGO

Raychem JBS-100-A Heat Tracing and Leak Detection

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-PRODUCT

CONNECTION KITS

NON-HAZARDOUS AND HAZARDOUS CONNECTION KITS

DescriptionCatalog Number
Power connections 
Single heating cableJBS-100-A
Single heating cable with lightJBS-100-L-A
Single heating cable (w/o JB)JS-100-A
Multiple heating cablesJBM-100-A
Multiple heating cable with lightJBM-100-L-A
Splice connections 
Above insulationT-100
Below insulationS-150 (not approved with HTV, VPL)
Tee connections 
Above insulationT-100
Below insulationPMKG-LT (BTV and QTVR only)
End seals 
Above insulationE-100
Above insulation with LED lightE-100-L-A (Red), E-100-L-E (Green)
Below insulationE-150 (not approved with HTV, VPL)
Pipe straps 
For conduit £ 1 inPS-01 Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (1)
For connection kits on pipes £ 2 inPS-03
For connection kits on pipes 2 in – 10 inPS-10
For connection kits on pipes 10 in – 19.5 inPS-20
Used to secure connection kits and brackets to pipes. Order by pipe diameter, as shown above.
Mounting bracketUMB
Replacement cold-applied core sealer for RAYCHEM brand BTV, QTVR, XTVR, HTV, and VPL heating cablesCS-100-A        Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (2)

Kit, junction box, straps and bracket all sold separately

Please refer to corresponding connection kit datasheet for details on approved hazardous and non-hazardous locations.

INSTRUCTION

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (7)

LIMITING HEATING CABLES

SELF-REGULATING AND POWER-LIMITING HEATING CABLES

SELF-REGULATING CABLE – BTV

  • 150°F (66°C) maximum maintain temperature
  • 185°F (85°C) maximum intermittent exposure temperature
  • T6 – 185°F (85°C) maximum sheath temperature
  • Power at 50°F: 3, 5, 8, 10 W/ft (plastic/metal pipe)

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (8)

SELF-REGULATING CABLE – QTVR

  • 225°F (107°C) maximum maintain temperature
  • 225°F (107°C) maximum intermittent exposure temperature
  • T4 – 275°F (135°C) maximum sheath temperature
  • Power at 50°F: 10, 15, 20 W/ft (plastic/metal pipe)

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (9)

SELF-REGULATING CABLE – XTVR (HPR TECHNOLOGY)

  • 302°F (150°C) maximum maintain temperature
  • 482°F (250°C) maximum intermittent exposure temperature
  • Sheath temp and T-Rating vary
  • Power at 50°F: 3, 5, 8, 10, 12, 15, 20 W/ft (metal pipe only)

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (10)

SELF-REGULATING CABLE – HTV (HPR TECHNOLOGY)

  • 400°F/205°C maximum maintain temperature
  • 500°F/260°C maximum intermittent exposure temperature
  • Sheath temperature and T-Rating vary
  • Power at 50°F: 3, 5, 8, 10, 12, 15, 20, 28 W/ft (metal pipe only)

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (11)

POWER LIMITING CABLE – VPL

  • For applications exceeding the temperature range of self-regulating cables

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (12)

ATTACHMENT PRODUCTS

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (13)

CLASS 1, DIVISION 1, HAZARDOUS LOCATION COMPONENTS

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (14)

All components above use HAK-C-100 with HAK-JB3-100 Kit, junction box, straps and bracket all sold separately

NON-HAZARDOUS AND HAZARDOUS CONTROL AND MONITORING

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (15)

NON-HAZARDOUS AND HAZARDOUS CONTROL AND MONITORING

Raychem-JBS-100-A-Heat-Tracing-and-Leak-Detection-FIG- (16)

INDUSTRIAL CAPABILITIES – WHY CHOOSE RAYCHEM?

Raychem provides advanced heat tracing solutions for the Industrial world, primarily for the general process, oil and gas, chemical and power generation industries. Learn about our complete electrical heat management systems and how they work.

  • More than 2B Feet installed worldwide
  • Highest lifetime value
  • Technical leaders of heat-trace systems.
  • Expert pre, installation and post-sale support

ENERGY TRANSITION

Raychem heat tracing and leak detection solutions keep critical processes operational, protect pipes and equipment from freezing, keep the flow in transfer lines, provide winter safety and detect liquid leaks in pipes and tanks.
That’s how we help keep people and environment safe and maximize your productivity in an energy-efficient and environmentally responsible manner.
Learn about our mission critical solutions in energy transition and decarbonization industries.

For more info, visit chemelex.com

©2025 Chemelex. RAYCHEM-POS-H60728-QuickRefCounter-EN-2504

Documents / Resources

Raychem JBS-100-A Heat Tracing and Leak Detection [pdf] User Guide
JBS-100-A, JBS-100-L-A, JS-100-A, JBM-100-A, JBM-100-L-A, T-100, S-150, T-100 PMKG-LT, E-100, E-100-L-A, E-100-L-E, E-150, PS-01, PS-03, PS-10, PS-20, JBS-100-A Heat Tracing and Leak Detection, JBS-100-A, Heat Tracing and Leak Detection, Leak Detection

References

Leave a comment

Your email address will not be published. Required fields are marked *