Interface Module Manuals & User Guides

idatalink maestro Rr Interface Module Installation Guide

August 4, 2023

idatalink maestro Rr Interface Module Product Information Product Name iDatalink Maestro RR Radio Replacement Interface Compatible Vehicle 2015-2017 Ford Mustang Features Retains steering wheel controls, camera, and more Required Products iDatalink Maestro MUS2 Dash Kit Programmed Firmware ADS-RR(SR)-FO2C-DS Additional Resources…

Brand: idataLink

CRUX SOOGM-15 OnStar Radio Replacement Interface Module User Guide

July 24, 2023

SOOGM-15 Radio Replacement with OnStar & SWC Retention for GM Class II Vehicles User Guide PRODUCT FEATURES Retains factory features in select GM Class II Data Bus vehicles while functioning with an aftermarket radio. Pre-programmed to retain factory Steering Wheel…

Brand: CRUX

NATIONAL INSTRUMENTS PXI-8431-2 Serial Interface Module Installation Guide

July 14, 2023

NATIONAL INSTRUMENTS PXI-8431-2 Serial Interface Module Product Information Product Name: PXI-8431-2 Product Type: Serial Installation Guide Product Usage Instructions NI-Serial Software Installation Log on as Administrator or as a user with administrator privileges. Insert the NI-Serial media. Run the NI-Serial…

Brand: NATIONAL INSTRUMENTS

Carrier SYSTXXXTRB01 Network Interface Module Instruction Manual

June 17, 2023

SYSTXXXTRB01 Translator Board Installation and Start-up Instructions SYSTXXXTRB01 Network Interface Module Fig. 1 – Module A210179 NOTE: Read the entire instruction manual before starting the installation. Safety Considerations Improper installation, adjustment, alteration, service, maintenance, or use can cause explosion, fire,…

Brand: Carrier

Hyfire HFI-CZM-01 Conventional Zone Interface Module Instruction Manual

June 13, 2023

Hyfire HFI-CZM-01 Conventional Zone Interface Module Instruction Manual GENERAL DESCRIPTION The conventional zone module is a device permitting to interface an analogue-intelligent addressable loop to a conventional detection zone. The analogue panel sees this device (and all the conventional sub-system)…

Brand: Hyfire

ARITECH CRR Wall Mounted Radio Link Alarm Interface Module Installation Guide

June 5, 2023

ARITECH CRR Wall Mounted Radio Link Alarm Interface Module CRR Wall-Mounted Radio Link Alarm Interface Module Installation Sheet Installation Sheet Description CRR Wall-Mounted Radio Link Alarm Interface Module allows you to transmit a fire alarm from radio linked alarm devices…

Brand: aritech

BOSCH MU 100 BMS Interface Module Instruction Manual

May 23, 2023

BOSCH MU 100 BMS Interface Module Product Information Product Name: MU 100 Model Number: 44 55 66 77 Suitable for use in countries with language options: de, en, cs, es, fr, it, nl, nl-BE, pl, sk Product includes: Modul, Beutel…

Brand: Bosch

PPI CIM Plus – 8 / 16 Universal Channel Analog Interface Module Instruction Manual

May 4, 2023

CIM Plus - 8 / 16 8/16 Universal Channel Analog Interface Module (AC Powered) Operation Manual CIM Plus - 8 / 16 Universal Channel Analog Interface Module This brief manual is primarily meant for quick reference to wiring connections and…

Brand: PPI

Ford 132 Super Duty F-Series Upfitter Interface Module Instruction Manual

April 22, 2023

Ford 132 Super Duty F-Series Upfitter Interface Module UPFITTER INTERFACE MODULE (UIM) The UPFITTER INTERFACE MODULE (UIM) is an electronic control module that provides read-access to numerous vehicle CAN messages, as well as up to 10 upfitter-wired signal inputs, for…

Brand: Ford

NOTIFIER N-ANN-S/PG Serial Parallel Printer Interface Module Owner’s Manual

March 14, 2023

NOTIFIER N-ANN-S/PG Serial Parallel Printer Interface Module General The N-ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories.…

Brand: NOTIFIER