Integrated Amplifier Manuals & User Guides

Peachtree Audio Carina GaN Carina X Carina 150X Integrated Amplifier User Manual

November 12, 2026

Carina GaN / Carina X / Carina 150X Overview Carina is an integrated amplifier platform with multiple digital and analog inputs, a front-panel OLED display, and a dual-knob user interface. It performs DAC conversion, volume control, phono pre-amplification (MM), and…

Brand: peachtree audio

MOON 341 Integrated Amplifier User Guide

November 12, 2026

MOON 341 Integrated Amplifier specifications output power @ 8 Ω 100 W output power @ 4 Ω 200 W input sensitivity 0.3 V – 4V input impedance 9.5 kΩ gain 40 dB frequency response 5 Hz – 100 kHz +0dB/…

Brand: MOON

TAGA Harmony HTA-1200B Hybrid Integrated Amplifier Instruction Manual

November 10, 2026

TAGA Harmony HTA-1200B Hybrid Integrated Amplifier Specifications We strongly advise to contact a professional installer or dealer in order to install TAGA Harmony products. We recommend using high quality TAGA Harmony cables and other installation accessories. Vacuum tubes 1 x…

Brand: TAGA HARMONY

NAD C 359S Integrated Amplifier Owner’s Manual

November 3, 2026

NAD C 359S Integrated Amplifier SPECIFICATION PREAMPLIFIER SECTION LINE IN, SUB-OUT (Analog bypass on) THD (20 Hz – 20 kHz) <0.005 % at 4V out Signal-to-Noise Ratio >90 dB (IHF; A-weighted, 500 mV out, unity gain) Input impedance (R and…

Brand: Nad

NAD Electronics C 359S C359S Integrated Amplifier Quick Setup Guide Instructions

November 3, 2026

NAD Electronics C 359S C359S Integrated Amplifier Quick Setup Parts Installation Instruction DOWNLOAD nadelectronics.com/product/C-359S-integrated-amplifier support.nadelectronics.com NETWORK SETUP Connect your C 3595 to your home network via Wired or Wireless connection. WIRED CONNECTION Using an Ethernet cable (not supplied), connect one…

Brand: NAD Electronics

Michi X430 Stereo Integrated Amplifier Owner’s Manual

October 21, 2026

Michi X430 Stereo Integrated Amplifier Specifications Power Output (FTC) 220 watts/channel, 8 ohms Maximum Power Output (Non FTC) 340 watts/channel, 4 ohms Continuous Power Output (Non FTC) 210 watts/channel, 8 ohms Total Harmonic Distortion < 0.03% Intermodulation Distortion (60 Hz…

Brand: MICHI

OCTAVE HS-1 Integrated Amplifier Instruction Manual

October 2, 2026

Octave HS-1 Product Manual Welcome to the Octave Family! Introduction Welcome to the Octave family! Thank you for choosing the Octave HS-1, a state-of-the-art Windows 11 VST host. The HS-1 is meticulously designed for audio professionals, combining robust hardware with…

Brand: OCTAVE

ARCAM SA35 , SA45 Streaming Integrated Amplifier Instruction Manual

September 15, 2026

SA35/SA45 USB Update Overview Use a FAT32-formatted USB stick containing the update file to update the SA35/SA45 software via the Settings menu. The unit may display a blank screen for up to 5 minutes during the update and must not…

Brand: ARCAM

Rotel X430 Michi Stereo Integrated Amplifier Owner’s Manual

September 3, 2026

Rotel X430 Michi Stereo Integrated Amplifier Quick Setup Place the unit with at least 10 cm (4 inches) unobstructed clearance around the chassis and ensure ventilation slots are open. Before connecting or disconnecting speakers or associated components, turn off all…

Brand: ROTEL

ROGUE AUDIO Magnum III Integrated Amplifier Instructions

August 19, 2026

Upgrades and repairs for your Rogue Audio Amplifier It is very important to only ship your Rogue Audio amplifier in original factory packaging. If you don’t have the original box and packing inserts call us to purchase replacements. Replacement packaging…

Brand: Rogue Audio