User Manuals, Instructions and Guides for sensitron products.

sensitron S1450CO Gas Detector for Carbon Monoxide Owner’s Manual

Ensure the safe detection of carbon monoxide with the S1450CO Gas Detector. Follow these instructions to properly install and use the SMART3 NC with electrochemical cell in car parks, laboratories, and non-classified areas. Monitor gas levels and maintain the detector for optimal performance. Compatible with optional relay board and serial RS485 output. Compliant with EMC standards. Reach out for updated product characteristics.

sensitron SMART3G-C2 Gas Detector Instructions

The SMART3G-C2 Gas Detector, designed for industrial use, features a catalytic sensor and explosion-proof enclosure. With fast response time and excellent output linearity, it detects flammable gases with precision. Equipped with multiple options, including RS485 communication and relay boards, it offers versatile functionality. ATEX marked and SIL2 hardware, this detector ensures safety and reliability. Discover its technical specifications and usage instructions in the user manual.

sensitron SMART3 NC Gas Detector Instruction Manual

The SMART3 NC Gas Detector user manual provides installation and circuit layout instructions for the Sensitron-manufactured gas detector, including adjustment for detection of various gases and multiple output types. With ATEX marking and additional information label, the detector can detect combustible and toxic gases in non-classified areas. This short installation manual includes model numbers such as SMART3 NC and C428.

sensitron SMART3G-D3 Gas Detector Instructions

The SMART3G-D3 Gas Detector with Infrared Sensor is an explosion-proof device designed to meet industrial requirements. It has a power supply of 12-24 Vdc and can be installed in ATEX Zone 2. The device features a 7-segment display for real-time concentration visualization and Hall effect sensors for non-intrusive field calibration. It is SIL2 hardware and SIL3 software certified, and with a redundant system, the hardware becomes SIL3. Install the device in the desired location using the M20 cable gland on the upper side of the enclosure for efficient gas detection.

sensitron SMART P Gas Detector for Car Parks User Manual

Learn about Sensitron's SMART P Gas Detector for Car Parks, compliant with EN 50545 1 standards. With an auto-diagnosis system and zero tracker, this detector detects a variety of gases, including CO and NO2. Find product usage instructions, maintenance tips, and more in the user manual. Check table 1 for the different types available.