controller Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for controller products.

Tip: include the full model number printed on your controller label for the best match.

controller manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

ENTTEC OCTO MK2 LED Pixel Controller User Manual

October 30, 2022
ENTTEC OCTO MK2 LED Pixel Controller ENTTEC’s OCTO is a robust and reliable installation grade LED controller engineered to take any architectural, commercial or entertainment project to the next level. With 8 universes of eDMX to pixel protocol conversion and…

Lenovo ServeRAID F5115 SAS/SATA Controller User Guide

October 30, 2022
Lenovo ServeRAID F5115 SAS/SATA Controller ServeRAID F5115-200GB and 800GB SAS/SATA Controllers for IBM System x Product Guide (withdrawn product) The ServeRAID F Series family of products offers MegaRAID data protection and flexible onboard flash technology that can be used in…

zimi SENOA Blind Controller User Guide

October 30, 2022
zimi SENOA Blind Controller Important - Read before installing. Must only be installed by a LICENSED ELECTRICIAN to local wiring regulations. Senoa devices must only be connected with the Active and Neutral from the same RCD. AVOID THE RISK OF…

CHCNAV LT60H GNSS Data Controller User Guide

October 29, 2022
CHCNAV LT60H GNSS Data Controller Introduction This user guide describes in detail how to install, configure and use the LT60H; the description of the operation process is clear and simple, so that users can easily, quickly and accurately get familiar…

V-TAC VT-2424 LED Sync Controller Instruction Manual

October 29, 2022
V-TAC VT-2424 LED Sync Controller TECHNICAL DATA Model VT-2424 Output 4 Channels Output Current <6.0A (Each Channel) Output Power 12V:288W, 24V:576W Supply Voltage DC: 12V-24V INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you…

SKYCATCH SKCEX201 Remote Controller User Manual

October 29, 2022
SKYCATCH SKCEX201 Remote Controller Installing the Batteries Pairing Batteries Before first use, it is recommended to mark 2 batteries as a pair and continue using them as a pair (charge and discharge them together) to maximize service life and ensure…