Regin develops intelligent building automation solutions, including sensors, room controllers, and energy-management systems for commercial and residential properties.
AB Regin is a global challenger in building automation, dedicated to creating comfortable indoor climates while optimizing energy efficiency. Headquartered in Kållered, Sweden, Regin offers a comprehensive portfolio of products ranging from field devices—such as sensors, valves, and actuators—to advanced room controllers and SCADA systems.
Their solutions, including the popular Regio and EXOcompact series, are designed to simplify installation and integration for system integrators and installers. With a focus on sustainable technology, Regin empowers facility managers and property owners to achieve significant energy savings and precise climate control.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
All technical documentation, including user manuals, instruction guides, and software, can be downloaded directly from the official website at www.regincontrols.com.
Allow the unit to warm up for 10 minutes. Then, perform a zero-set calibration by briefly pressing the push-button. The green LED will flash rapidly (5 Hz) while the calibration is performed.
The HTRT2500 requires a supply voltage of 24 V AC (±20%) or 15...35 V DC.
The device comes with a default Modbus address of 100 (Hex 64). Other transmitters often default to address 1.
The TTC80F is a 3-phase thyristor controller designed for the proportional control of electric heating. It automatically adapts its control mode to suit the dynamics of the controlled object, ensuring precise temperature regulation.