Control Module Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Control Module products.

Tip: include the full model number printed on your Control Module label for the best match.

Control Module manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

Velbus VMBSTART-B-20 Black Glass Control Module User Guide

February 20, 2026

Quick start guide VMBSTART-x-20 Congratulations on your purchase of the Velbus Starter Kit! This quick start guide will walk you through the installation step by step. Need a more detailed manual? Scan the QR code to access the product page…

Brand: VELBUS

DIGITALAS DiTeL GSM Gate GSM Control Module User Manual

February 16, 2026

DIGITALAS DiTeL GSM Gate GSM Control Module Specifications dimensions - 65 * 40 * 15 mm Supply voltage 11-14V DC current consumption up to 30mA (standby) to 150mA (operation), the source should provide a short-term peak current up to 3…

Brand: DIGITALas

LTECH KPA Push to 01-10V Lighting Control Module User Manual

February 3, 2026

LTECH KPA Push to 01-10V Lighting Control Module Product Introduction Paired with a push switch, it instantly transforms into a 0/1-10V dimmer, enabling traditional switches to easily adjust professional lighting effects. A short press turns the light on or off,…

Brand: LTECH

BANNER AT-FM-10K Duo Touch Two Hand Control Module Instruction Manual

February 1, 2026

BANNER AT-FM-10K Duo Touch Two Hand Control Module Features DUO-TOUCH® SG for use with two actuating devices Diverse-redundant microcontrollers Monitors two Banner STB Self-Checking Optical Touch Buttons, or two mechanical push buttons Two redundant, forced-guided (mechanically linked) output contacts rated…

Brand: BANNER

DOMUS LINE CM2-XDM X-Driver Control Module Instruction Manual

January 31, 2026

DOMUS LINE CM2-XDM X-Driver Control Module Specifications X-DRIVER D-M i SPECIFICATION X-DRIVER D-M 30W X-DRIVER D-M 60W X-DRIVER D-M 96W Input voltage 220-240Vac 110-120Vac for North America only Input frequency 50/60Hz Input current 0,40A for 100-120Vac 0,20A for 220-240Vac…

Brand: DOMUS LINE

T238 V3 Electronic Fire Control Module User Manual

January 7, 2026

T238 V3 Electronic Fire Control Module Product Specifications Size of V2: 45*30*14mm/V3: 100*23*5mm Operating Voltage: 6-16.8V MOSFET Overheat Protection Motor Short Circuit Protection Battery Over-Discharge Protection Active Brake Technology Uses Optical Sensor for Gear Detection Binary Trigger and Paintball Shooting…

Brand: T238

SAVANT SKL-3030-xx 30 Keypad Power and Control Module User Manual

December 2, 2025

Savant 30 Keypad Power and Control Module [SKL-3030-xx] Quick Reference Guide SKL-3030-xx 30 Keypad Power and Control Module Box Contents (1) 30 Keypad Power and Control Module (SKL-3030-xx) (5) 4-pin Screw Down Plug-in Connectors (028-0834-xx) (1) Power Supply to 120V…

Brand: SAVANT

DMAXSTORE DMAX-FICM-LB7 Fuel Injection Control Module Installation Guide

November 26, 2025

DMAXSTORE DMAX-FICM-LB7 Fuel Injection Control Module Specifications Component Specification FICM Fuse 20A Fuel Line Bolt Size 17mm Mounting Bolt Size 14mm Step 1: Verify The Diagnosis Replace the FICM fuse with the included 20A fuse. (see fuse location on page…

Brand: DMAXSTORE

SILENT KNIGHT SK-Relay-6 Six Relay Control Module Installation Guide

November 22, 2025

SILENT KNIGHT SK-Relay-6 Six Relay Control Module Product Specifications Normal Operating Voltage: 12V Stand-By Current: 0.46A Alarm Current: 0.7A Product Usage Instructions Before Installing: If the modules will be installed in an existing operational system, inform the operator and local…

Brand: SILENT KNIGHT

SYSTEM SENSOR CR-6A Six Relay Control Module Installation Guide

November 22, 2025

SYSTEM SENSOR CR-6A Six Relay Control Module SPECIFICATIONS Normal Operating Voltage: 15-29 VDC Stand-By Current: 1.9 mA Alarm Current: 32 mA (assumes all six relays have been switched once and all six LEDs solid on) Temperature Range: 32°F to 120°F…

Brand: SYSTEM SENSOR