Channel Switch Manuals / Datasheets / Instructions

CISCO MDS 9396V 64-Gbps 96-Port Fibre Channel Switch User Guide

Discover how to set up and manage the Cisco MDS 9396V 64-Gbps 96-Port Fibre Channel Switch with ease. Learn about connecting the console port, modem, and management port for efficient administration. Find details on different port types and their functionalities for seamless network operation.

SKYDANCE DH4 Dali DMX 4 Channel Switch Owner’s Manual

Learn all about the DH4 Dali DMX 4-Channel Switch in this comprehensive user manual. Find specifications, system settings, FAQs, and more for this versatile product with OLED display and high-inrush relays.

SuperLightingLED DALI/DMX 4 Channel Switch Owner’s Manual

Discover the versatile DH4 DALI/DMX 4-Channel Switch with 4 DALI address and 4-channel relay output. Easily switch between DALI and DMX modes for seamless control. Includes manual address assignment and a 5-year warranty. Perfect for lighting system integration.

Honeywell MAXPRO NVR PE Professional Edition 4K 64 Channel Switch Instruction Manual

MAXPRO® NVR PE (Professional Edition)—Rev B Enterprise Network Video Recorder Quick Install Guide Document 800-15428V4 – Rev A – 08/2016 Introduction Welcome to your new Honeywell MAXPRO ® NVR PE. This guide helps you set up the NVR right out of the box. Before installing your NVR, please read this guide carefully. Note Translated Quick Install Guides can be accessed on your MAXPRO NVR unit after logging in, by clicking on Start menu Honeywell Quick Install Guides. Unpack Check that the items received match those listed on the order form and packing slip. The packing box should include, in addition to your NVR unit and this guide: MAXPRO NVR Client Software (Single Site) and Server Software DVD (includes manuals) MAXPRO Viewer Multi-Site Viewing Software Kit (includes DVD and Getting Started Guide). Not shown. Not shown: DVI to HDMI adapter MAXPRO NVR DDNS Installation Instructions Video storage hard drives (installed in the unit) Rail hardware kit with instructions Note Other peripheral hardware (owner supplied) will also be needed for your installation (such as cameras, network PoE switch for the camera network, network switch for a client workstation network, a monitor, and an optional keyboard controller). Install the Hardware Mount the MAXPRO NVR PE Unit in a Rack Remove the bezel (if you ordered this option and it is installed) from the front of the unit by turning the bezel key lock clockwise, and then pulling it away from the unit. Mount the NVR with the supplied rail hardware kit. The kit allows the MAXPRO NVR PE unit to slide in and out of the rack it is mounted in and provides rear support for the chassis. Refer to the installation instructions included with the rail hardware kit. Replace the bezel (if supplied) on the front of the unit. Insert the right side of the bezel into the tabs on the right handle on the front plate of the unit and then align the bezel key lock with the left handle. Slide the left side of the bezel into place. Turn the bezel key lock counterclockwise to secure the bezel. Connect the Hardware Rear Panel # Connector Connects to... 1 AC Power (x2) Electrical outlets 2 VGA Port VGA monitor 3 DVI-D Port DVI monitor or HDMI monitor with adapter 4 Display Port DP monitor 5 HDMI Port Not used 6 LAN1 - Camera Network Port Network 7 USB Ports (x4) Various devices 8 LAN2 - Client Network Port Network 9 S/PDIF (Optical) Not used 14-Oct Audio Inputs and Outputs Not used 15 RAID Management Port (plugged) Keyboard Controller (Optional) Follow the documentation that was included with your IP keyboard controller to connect it to the NVR. Network Connections Connect a network PoE switch to the camera network port at the rear of the NVR. Connect your cameras to the network PoE switch with CAT5 Ethernet cables. Optionally, connect the client workstation network port to your client workstation network through a network switch. This allows remote access to your NVR. The default client workstation network IP address must be changed to an available static IP address on your client workstation network. Monitor(s) The MAXPRO NVR PE comes with built-in graphics and four types of monitor outputs. The unit supports connection of a single monitor using one of the outputs. The local monitor can be used to configure the NVR; however continuous local video monitoring is not recommended. HDMI Output Not used DVI-D Output to DVI monitor or to HDMI monitor with the adapter VGA Output to VGA monitor Display Output to DP monitor The recommended resolution for your monitor is 1280 x 1024 pixels (minimum 1024 x 768) and display colors of at least 32 bit. Dual Network Configuration Contact your dealer to purchase Honeywell and third-party IP and analog cameras and encoder. Power Up the Unit Note Honeywell recommends using an uninterruptible power supply (UPS) for the MAXPRO NVR PE unit, the camera network switch, and the cameras to ensure that the NVR can continue to record video during a power outage or during transient power events. If you need to monitor video during a power outage, consider a UPS for the monitor as well. Before powering up the NVR, turn on camera(s) and other devices connected to the NVR. Press the power button on the front of the NVR. After powering on the unit, you are prompted to log on. The Default user is user name: NVR-Admin, password: Password$123. The user name and password are case sensitive. You will be prompted to create a new password the first time that you log in. The setup wizard starts automatically but may take two minutes to initiate. Note Translated Quick Install Guides can be accessed on your MAXPRO NVR unit after logging in, by clicking on Start menu Honeywell Quick Install Guides. Configure the RAID The video storage hard drives are pre-configured for RAID 5 in the factory but can be reconfigured for RAID 6 if required. However, there will be less usable video storage space. To access the RAID controller, click the HWAM icon on the desktop and login with: •User name = admin •Password = 0000 Honeywell IP Camera Configuration Using the MAXPRO NVR Wizard (3 Clicks* to Live Video) The CONFIGURATION dialog appears. When the network is ready (network icon in Windows tray), click to accept the default settings and proceed to CAMERA DISCOVERY. To modify the settings for your unique system requirements, follow the table below. After initial setup, you can do this in the MAXPRO NVR client. Field Description Video Format NTSC, PAL Enable Continuous Recording Start recording as soon as the camera is added in MAXPRO NVR. Dynamic IP Synchronization NVR synchronizes any change in a device’s IP address. Auto Add Discovered Cameras Any newly connected device is automatically added to the Devices list. Choose Camera Network Choose your camera network. Choose Camera Network Assigns a valid static IP address to the camera. Use only if you do not have a DHCP server and you want to assign an IP address in your computer network range. Filter Discovered Cameras Filter the discovered cameras based on the camera model and/or IP range. The CAMERA DISCOVERY window appears. Each newly connected camera is identified and an IP address is assigned to the camera by the Wizard, after which the camera reboots. It may take a few minutes before cameras are discovered and added. You will see a Discovery in progress… indicator as well as a pop-up message on the lower right of your monitor. Click The INSTALLATION window appears. Click to start the MAXPRO NVR application. Proceed to Live View. Only Honeywell IP cameras and HVE encoders (except Honeywell Performance Series and New equIP ® Series IP cameras) are discovered and added in the MAXPRO NVR Wizard. * 3 clicks for specific models with default settings and in a local area network. Live View Please wait while the system logs you on automatically as a Windows Logged-In User. MAXPRO NVR launches and the Viewer tab displays (see below). To view video from cameras, drag MAXPRO NVR in the Devices list into the display panel to show video from all discovered cameras in the Viewer. You can also highlight and drag each camera into a panel. Note For continuous monitoring of live video, it is recommended that you use a remote client workstation. To install a remote client, use the installation software on the software DVD included with your NVR. Select Client Installation as the Installation Type during setup. © 2016 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes. For patent information, see www.honeywell.com/patents. Third Party Device Configuration On the Configurator tab, click the Camera tab. Click (Auto Discovery) to automatically discover the connected IP cameras in the subnet. Click (Manual Add) to manually add the IP device to the Camera list. Enter the device’s IP address into the field and ensure that the user name and password listed for the new camera match the user name and password of that camera. To change the default parameters of a camera, select it and then click at the beginning of the camera line to open the camera advanced settings pane where you can modify the settings as required. Click Save for your new settings to take effect. Additional Configuration Configurator tab sub-tabs: System: System information, event recording, email, archival schedule, holiday/exceptions for schedules. Disk: Configure and monitor video storage hard drives. Camera: Discover and add network cameras, live camera configuration, recording, video motion detection. Schedule: Set recording schedules configuration. I/O: Configure input and output for each camera. Sequence: Select a sequence of cameras for live video. User: Set user access and permission levels. MAXPRO NVR Web Client To access the Web Client, click on the MAXPRO NVR Web Client shortcut on the NVR desktop. Click Continue on the self signed certificate warning message that appears. Login to the Web Client with default Username: admin and Password: trinity. MAXPRO NVR PE Default IP Address Configuration You can configure your MAXPRO NVR unit with two network ports with the following static IP addresses: 192.168.1.101 for LAN1 (Camera Network) 172.25.254.101 for LAN2 (Client Workstation Network) If more than one MAXPRO NVR unit is on the same network, you must assign a unique IP address and computer name to each unit (the default name is MAXPRO-NVR). To change the IP address: Click the network icon located next to the clock (lower right of the screen), click Open Network and Sharing Center, then click Change adapter settings. Right-click Camera Network or Client Workstation Network, and then click Properties. Click Internet Protocol Version 4 (TCP/IPv4), then click Properties. Click Use the following IP address, and type the IP address settings in the IP address, Subnet mask, and Default gateway boxes. Click Use the following DNS server addresses, and then, in the Preferred DNS server and Alternate DNS server boxes, type the addresses of the primary and secondary DNS servers. This step is required when clients connect through the Internet. To change the computer name: Click Start, right-click Computer, click Properties, click Advanced system settings, click the Computer Name tab, and then click Change. Under Computer name, delete the old computer name, type a new computer name, and then click OK. The name cannot contain spaces or all numbers or any of the following characters: < > ; : " * + = \ | ?. Restart the computer after changing the computer name. Navigate to the C:\Program Files (x86)\Honeywell\MaxproNVR\TrinityFramework\bin folder, and then double-click MaxproNVRMachineNameUtility.exe to open the MAXPRO NVR Utility. The new computer name should automatically appear in the Machine Name field. If it does not, enter the name manually. Click Update. The message Machine Name Updated successfully appears when the update is complete. More Information MAXPRO NVR PE Third Party Devices Please refer to the appropriate user guide located on the software/ documentation DVD or on the Honeywell product web site at www.honeywell.com/security. The MAXPRO NVR Guides (Installation and Configuration Guide, and Operator’s Guide) provide detailed information on adding and configuring third party cameras, the multi-function Web Client, as well as other advanced features. A comprehensive list of all the third party devices supported by MAXPRO NVR PE is available on the product compatibility page: www.security.honeywell.com/hota/compatibility/index.html. http://www.security.honeywell.com/hota/compatibility/index.html www.honeywell.com/security +1 800 323 4576 (North America only) https://honeywellsystems.com/ss/techsupp/index.html www.honeywell.com/security/uk +44 (0) 1928 754 028 (Europe only) https://honeywellsystems.com/ss/techsupp/index.html Document 800-15428V4 – Rev A – 08/2016

Discover how to install and connect the MAXPRO NVR PE Professional Edition 4K 64 Channel Switch with this user manual. Get step-by-step instructions and specifications for this Honeywell product.

CISCO MDS 9148T Fibre Channel Switch Installation Guide

Learn how to install and set up the Cisco MDS 9148T Fibre Channel Switch with this comprehensive hardware installation guide. Get detailed information on chassis components, front and rear views, LEDs, fan modules, power supplies, and cabinet/rack requirements. Perfect for users needing guidance on Cisco MDS 9148T Fibre Channel Switch installation.

Search for Channel Switch Documents by Model Name or Number:

Tag Archives: Channel Switch

CISCO MDS 9396V 64-Gbps 96-Port Fibre Channel Switch User Guide

SKYDANCE DH4 Dali DMX 4 Channel Switch Owner’s Manual

SuperLightingLED DALI/DMX 4 Channel Switch Owner’s Manual

Honeywell MAXPRO NVR PE Professional Edition 4K 64 Channel Switch Instruction Manual

CISCO MDS 9148T Fibre Channel Switch Installation Guide