Bathtub Manuals & User Guides

User manuals, setup guides, troubleshooting help, and repair information for Bathtub products.

Tip: include the full model number printed on your Bathtub label for the best match.

Bathtub manuals

Latest posts, featured manuals, and retailer-linked manuals for this brand tag.

WOODBRIDGE WB603038-L Walk In Bathtub Installation Guide

September 11, 2026
WOODBRIDGE WB603038-L Walk In Bathtub IMPORTANT INFORMATION READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT. INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR…

lowes 93617495 67-in White Acrylic Whirlpool Bathtub Instructions

September 4, 2026
lowes 93617495 67-in White Acrylic Whirlpool Bathtub Technical Specifications Chemical Compatibility Acetone/ammonia trigger irreversible coating erosion; formaldehyde compounds promote polymer chain scission. Material-Specific Care Ceramic/acrylic surfaces: Use nano-particle polishes for scratch occlusion. Thermal enhancement: 40-50°C surface temperature boosts acetic acid…

Empava EMPV-72JT367LED Massage Bathtub User Guide

September 4, 2026
Empava EMPV-72JT367LED Massage Bathtub Specifications Model EMPV-72JT367LED Power supply/outlet 110/120V, 15 Amp circuit outlet (plug-in) Electrical safety protection Highly sensitive, fast-acting GFCI (induced current rating below 15 mA; trip time < 0.1 s; rated current above 30 A) Hot/cold water…

IKEA VALVATTNET Bathtub Instructions

August 29, 2026
IKEA VALVATTNET Bathtub Important Information Important: Wet the bathtub floor before placing the mat. Press down firmly on the entire surface to make sure all suction cups stick, then carefully step onto the centre. Important! Not for use on textured…

Freestanding Bathtub Dimensions and Specifications

technical specification • August 11, 2025
Detailed dimensions and specifications for a freestanding bathtub, including length, width, height, and overflow measurements. This guide helps in understanding the product's physical attributes for installation and design purposes.